Message ID | 20240222130716.1311432-1-fancp2007@gmail.com |
---|---|
State | Superseded |
Headers | show |
Series | [v6] configs/friendlyarm_nanopi_neo2_defconfig: new board | expand |
Hi Scott, no need to resend, and... On 22/02/24 14:07, Scott Fan wrote: > Add support for the FriendlyARM NanoPi NEO2 with mainline components: > - U-Boot 2024.01 > - Linux 6.6.17 > > Board's wiki page: > - https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO2 > > Signed-off-by: Scott Fan <fancp2007@gmail.com> ... if you resend please keep my: Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> [Only build-tested using docker-run] Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Best regards
Hi Giulio, I removed the unnecessary line, then resend the patch. Thanks for your reminder. Scott Fan On Thu, Feb 22, 2024 at 9:12 PM Giulio Benetti <giulio.benetti@benettiengineering.com> wrote: > > Hi Scott, > > no need to resend, and... > > On 22/02/24 14:07, Scott Fan wrote: > > Add support for the FriendlyARM NanoPi NEO2 with mainline components: > > - U-Boot 2024.01 > > - Linux 6.6.17 > > > > Board's wiki page: > > - https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO2 > > > > Signed-off-by: Scott Fan <fancp2007@gmail.com> > > ... if you resend please keep my: > Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com> > [Only build-tested using docker-run] > Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com> > > Best regards > -- > Giulio Benetti > CEO&CTO@Benetti Engineering sas > > > > --- > > Changes v1 -> v2: > > - Fix issues from 'utils/docker-run make check-package' > > - Add atf custom version in the defconfig > > - No need for sudo to run sync > > > > Changes v2 -> v3: > > - Update patch file, add the upstream tag > > > > Changes v3 -> v4: > > - Use a single integrated image file (u-boot-sunxi-with-spl.bin) > > - Remove patch file for uboot, switch to binman > > - Merge boot partition into rootfs partition > > - Bump kernel version to 6.1.61 > > > > Changes v4 -> v5: > > - Bump kernel version to 6.1.65 > > > > Changes v5 -> v6: > > - Bump kernel version to 6.6.17 > > - Bump uboot version to 2024.01 > > - Add option BR2_TARGET_UBOOT_NEEDS_OPENSSL=y > > --- > > board/friendlyarm/nanopi-neo2/extlinux.conf | 4 ++ > > board/friendlyarm/nanopi-neo2/genimage.cfg | 16 +++++++ > > board/friendlyarm/nanopi-neo2/post-build.sh | 5 +++ > > board/friendlyarm/nanopi-neo2/readme.txt | 34 ++++++++++++++ > > configs/friendlyarm_nanopi_neo2_defconfig | 49 +++++++++++++++++++++ > > 5 files changed, 108 insertions(+) > > create mode 100644 board/friendlyarm/nanopi-neo2/extlinux.conf > > create mode 100644 board/friendlyarm/nanopi-neo2/genimage.cfg > > create mode 100755 board/friendlyarm/nanopi-neo2/post-build.sh > > create mode 100644 board/friendlyarm/nanopi-neo2/readme.txt > > create mode 100644 configs/friendlyarm_nanopi_neo2_defconfig > > > > diff --git a/board/friendlyarm/nanopi-neo2/extlinux.conf b/board/friendlyarm/nanopi-neo2/extlinux.conf > > new file mode 100644 > > index 0000000000..482a069f74 > > --- /dev/null > > +++ b/board/friendlyarm/nanopi-neo2/extlinux.conf > > @@ -0,0 +1,4 @@ > > +label friendlyarm-nanopi-buildroot > > + kernel /boot/Image > > + devicetree /boot/sun50i-h5-nanopi-neo2.dtb > > + append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rootwait > > diff --git a/board/friendlyarm/nanopi-neo2/genimage.cfg b/board/friendlyarm/nanopi-neo2/genimage.cfg > > new file mode 100644 > > index 0000000000..67e4e5efdb > > --- /dev/null > > +++ b/board/friendlyarm/nanopi-neo2/genimage.cfg > > @@ -0,0 +1,16 @@ > > +image sdcard.img { > > + hdimage { > > + } > > + > > + partition u-boot-tpl-spl-dtb { > > + in-partition-table = "no" > > + image = "u-boot-sunxi-with-spl.bin" > > + offset = 8K > > + } > > + > > + partition rootfs { > > + partition-type = 0x83 > > + image = "rootfs.ext4" > > + offset = 1M > > + } > > +} > > diff --git a/board/friendlyarm/nanopi-neo2/post-build.sh b/board/friendlyarm/nanopi-neo2/post-build.sh > > new file mode 100755 > > index 0000000000..c7ec875068 > > --- /dev/null > > +++ b/board/friendlyarm/nanopi-neo2/post-build.sh > > @@ -0,0 +1,5 @@ > > +#!/bin/sh > > + > > +BOARD_DIR="$(dirname "$0")" > > + > > +install -m 0644 -D "${BOARD_DIR}/extlinux.conf" "${TARGET_DIR}/boot/extlinux/extlinux.conf" > > diff --git a/board/friendlyarm/nanopi-neo2/readme.txt b/board/friendlyarm/nanopi-neo2/readme.txt > > new file mode 100644 > > index 0000000000..c896a57525 > > --- /dev/null > > +++ b/board/friendlyarm/nanopi-neo2/readme.txt > > @@ -0,0 +1,34 @@ > > +Intro > > +===== > > + > > +This default configuration will allow you to start experimenting with the > > +buildroot environment for the NanoPi NEO2. With the current configuration > > +it will bring-up the board, and allow access through the serial console. > > + > > +Wiki link: > > +https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO2 > > + > > +This configuration uses U-Boot mainline and kernel mainline. > > + > > +How to build > > +============ > > + > > + $ make friendlyarm_nanopi_neo2_defconfig > > + $ make > > + > > +Note: you will need access to the internet to download the required > > +sources. > > + > > +How to write the SD card > > +======================== > > + > > +Once the build process is finished you will have an image called "sdcard.img" > > +in the output/images/ directory. > > + > > +Copy the bootable "sdcard.img" onto an SD card with "dd": > > + > > + $ sudo dd if=output/images/sdcard.img of=/dev/sdX > > + $ sync > > + > > +Insert the micro SDcard in your NanoPi NEO2 and power it up. The console > > +is on the serial line, 115200 8N1. > > diff --git a/configs/friendlyarm_nanopi_neo2_defconfig b/configs/friendlyarm_nanopi_neo2_defconfig > > new file mode 100644 > > index 0000000000..a60aba06d9 > > --- /dev/null > > +++ b/configs/friendlyarm_nanopi_neo2_defconfig > > @@ -0,0 +1,49 @@ > > +BR2_aarch64=y > > +BR2_cortex_a53=y > > +BR2_ARM_FPU_VFPV4=y > > + > > +# Linux headers same as kernel, a 6.6 series > > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y > > + > > +# Firmware > > +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y > > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y > > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.7" > > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_a64" > > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y > > + > > +# Bootloader > > +BR2_TARGET_UBOOT=y > > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > > +BR2_TARGET_UBOOT_CUSTOM_VERSION=y > > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01" > > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo2" > > +BR2_TARGET_UBOOT_NEEDS_DTC=y > > +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y > > +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y > > +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y > > +BR2_TARGET_UBOOT_SPL=y > > +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" > > +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null" > > + > > +# Kernel > > +BR2_LINUX_KERNEL=y > > +BR2_LINUX_KERNEL_CUSTOM_VERSION=y > > +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.17" > > +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y > > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-nanopi-neo2" > > +BR2_LINUX_KERNEL_INSTALL_TARGET=y > > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > > + > > +# Filesystem > > +BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM NanoPi NEO2" > > +BR2_TARGET_ROOTFS_EXT2=y > > +BR2_TARGET_ROOTFS_EXT2_4=y > > +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" > > +BR2_PACKAGE_HOST_DOSFSTOOLS=y > > +BR2_PACKAGE_HOST_GENIMAGE=y > > +BR2_PACKAGE_HOST_MTOOLS=y > > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo2/post-build.sh" > > +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" > > +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo2/genimage.cfg" >
diff --git a/board/friendlyarm/nanopi-neo2/extlinux.conf b/board/friendlyarm/nanopi-neo2/extlinux.conf new file mode 100644 index 0000000000..482a069f74 --- /dev/null +++ b/board/friendlyarm/nanopi-neo2/extlinux.conf @@ -0,0 +1,4 @@ +label friendlyarm-nanopi-buildroot + kernel /boot/Image + devicetree /boot/sun50i-h5-nanopi-neo2.dtb + append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rootwait diff --git a/board/friendlyarm/nanopi-neo2/genimage.cfg b/board/friendlyarm/nanopi-neo2/genimage.cfg new file mode 100644 index 0000000000..67e4e5efdb --- /dev/null +++ b/board/friendlyarm/nanopi-neo2/genimage.cfg @@ -0,0 +1,16 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8K + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + offset = 1M + } +} diff --git a/board/friendlyarm/nanopi-neo2/post-build.sh b/board/friendlyarm/nanopi-neo2/post-build.sh new file mode 100755 index 0000000000..c7ec875068 --- /dev/null +++ b/board/friendlyarm/nanopi-neo2/post-build.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname "$0")" + +install -m 0644 -D "${BOARD_DIR}/extlinux.conf" "${TARGET_DIR}/boot/extlinux/extlinux.conf" diff --git a/board/friendlyarm/nanopi-neo2/readme.txt b/board/friendlyarm/nanopi-neo2/readme.txt new file mode 100644 index 0000000000..c896a57525 --- /dev/null +++ b/board/friendlyarm/nanopi-neo2/readme.txt @@ -0,0 +1,34 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the NanoPi NEO2. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Wiki link: +https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO2 + +This configuration uses U-Boot mainline and kernel mainline. + +How to build +============ + + $ make friendlyarm_nanopi_neo2_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sync + +Insert the micro SDcard in your NanoPi NEO2 and power it up. The console +is on the serial line, 115200 8N1. diff --git a/configs/friendlyarm_nanopi_neo2_defconfig b/configs/friendlyarm_nanopi_neo2_defconfig new file mode 100644 index 0000000000..a60aba06d9 --- /dev/null +++ b/configs/friendlyarm_nanopi_neo2_defconfig @@ -0,0 +1,49 @@ +BR2_aarch64=y +BR2_cortex_a53=y +BR2_ARM_FPU_VFPV4=y + +# Linux headers same as kernel, a 6.6 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.7" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_a64" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo2" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.17" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-nanopi-neo2" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM NanoPi NEO2" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo2/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo2/genimage.cfg"
Add support for the FriendlyARM NanoPi NEO2 with mainline components: - U-Boot 2024.01 - Linux 6.6.17 Board's wiki page: - https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO2 Signed-off-by: Scott Fan <fancp2007@gmail.com> --- Changes v1 -> v2: - Fix issues from 'utils/docker-run make check-package' - Add atf custom version in the defconfig - No need for sudo to run sync Changes v2 -> v3: - Update patch file, add the upstream tag Changes v3 -> v4: - Use a single integrated image file (u-boot-sunxi-with-spl.bin) - Remove patch file for uboot, switch to binman - Merge boot partition into rootfs partition - Bump kernel version to 6.1.61 Changes v4 -> v5: - Bump kernel version to 6.1.65 Changes v5 -> v6: - Bump kernel version to 6.6.17 - Bump uboot version to 2024.01 - Add option BR2_TARGET_UBOOT_NEEDS_OPENSSL=y --- board/friendlyarm/nanopi-neo2/extlinux.conf | 4 ++ board/friendlyarm/nanopi-neo2/genimage.cfg | 16 +++++++ board/friendlyarm/nanopi-neo2/post-build.sh | 5 +++ board/friendlyarm/nanopi-neo2/readme.txt | 34 ++++++++++++++ configs/friendlyarm_nanopi_neo2_defconfig | 49 +++++++++++++++++++++ 5 files changed, 108 insertions(+) create mode 100644 board/friendlyarm/nanopi-neo2/extlinux.conf create mode 100644 board/friendlyarm/nanopi-neo2/genimage.cfg create mode 100755 board/friendlyarm/nanopi-neo2/post-build.sh create mode 100644 board/friendlyarm/nanopi-neo2/readme.txt create mode 100644 configs/friendlyarm_nanopi_neo2_defconfig