| Message ID | 20231109035947.1852675-2-Mr.Bossman075@gmail.com |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [v1] configs/imxrt1050-evk: Use zImage instead of uImage | expand |
On Wed, 8 Nov 2023 22:59:47 -0500 Jesse Taube <mr.bossman075@gmail.com> wrote: > imxrt1050-evk was using uImage switch to using zImage > now. > > Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> > --- > board/freescale/imxrt1050evk/genimage.cfg | 2 +- > board/freescale/imxrt1050evk/uboot.fragment | 2 +- > configs/imxrt1050-evk_defconfig | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) Applied to master, thanks. Thomas
diff --git a/board/freescale/imxrt1050evk/genimage.cfg b/board/freescale/imxrt1050evk/genimage.cfg index daa51bdbe0..64fc8452f8 100644 --- a/board/freescale/imxrt1050evk/genimage.cfg +++ b/board/freescale/imxrt1050evk/genimage.cfg @@ -1,7 +1,7 @@ image boot.vfat { vfat { files = { - "uImage", + "zImage", "imxrt1050-evk.dtb", } } diff --git a/board/freescale/imxrt1050evk/uboot.fragment b/board/freescale/imxrt1050evk/uboot.fragment index 1c5bb6af35..dd45ca4c29 100644 --- a/board/freescale/imxrt1050evk/uboot.fragment +++ b/board/freescale/imxrt1050evk/uboot.fragment @@ -1,2 +1,2 @@ CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs console=ttyLP0 root=/dev/mmcblk0p2 rw earlycon rootwait;load mmc 0:1 0x80800000 imxrt1050-evk.dtb;load mmc 0:1 0x80000000 uImage;bootm 0x80000000 - 0x80800000" +CONFIG_BOOTCOMMAND="setenv bootargs console=ttyLP0 root=/dev/mmcblk0p2 rw earlycon rootwait;load mmc 0:1 0x80800000 imxrt1050-evk.dtb;load mmc 0:1 0x80000000 zImage;bootz 0x80000000 - 0x80800000" diff --git a/configs/imxrt1050-evk_defconfig b/configs/imxrt1050-evk_defconfig index 0eb6f626c9..85d4783579 100644 --- a/configs/imxrt1050-evk_defconfig +++ b/configs/imxrt1050-evk_defconfig @@ -14,7 +14,7 @@ BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6" BR2_LINUX_KERNEL_DEFCONFIG="imxrt" -BR2_LINUX_KERNEL_UIMAGE=y +BR2_LINUX_KERNEL_ZIMAGE=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imxrt1050-evk"
imxrt1050-evk was using uImage switch to using zImage now. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> --- board/freescale/imxrt1050evk/genimage.cfg | 2 +- board/freescale/imxrt1050evk/uboot.fragment | 2 +- configs/imxrt1050-evk_defconfig | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)