@@ -158,6 +158,7 @@ F: package/rauc/
N: Angelo Compagnucci <angelo.compagnucci@gmail.com>
F: board/sipeed/lichee_rv/
+F: board/sipeed/lichee_rv_dock/
F: configs/sipeed_lichee_rv*
F: package/apparmor/
F: package/corkscrew/
new file mode 100644
@@ -0,0 +1,19 @@
+# Minimal SD card image for the sipeed Lichee RV dock
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ in-partition-table = false
+ image = "u-boot-sunxi-with-spl.bin"
+ offset = 8K
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ bootable = "true"
+ offset = 1M
+ }
+}
new file mode 100644
@@ -0,0 +1,7 @@
+CONFIG_BT=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_SERDEV=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_RTL=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
new file mode 100644
@@ -0,0 +1,6 @@
+auto lo
+iface lo inet loopback
+
+auto wlan0
+iface wlan0 inet dhcp
+wpa-conf /etc/wpa_supplicant.conf
new file mode 100644
@@ -0,0 +1,8 @@
+ap_scan=1
+
+network={
+ ssid="YOURSSID"
+ scan_ssid=1
+ key_mgmt=WPA-PSK
+ psk="YOURPASSWD"
+}
new file mode 100644
@@ -0,0 +1,45 @@
+Lichee RV dock
+===============
+
+Lichee RV Dock is a RISC-V Linux development kits with high integration, small
+size and affordable price designed for opensource developer. It's equipped with
+HDMI interface and it supports many screen by its screen convert board. It's
+also equipped with many peripherals, including a UAB-A port, 2.4G Wifi-BT module,
+an analog microphone and a speaker jack interface.
+
+How to build
+============
+
+$ make sipeed_lichee_rv_dock_defconfig
+$ make
+
+Wifi
+==========
+
+Edit board/sipeed/lichee_rv_dock/overlay/etc/wpa_supplicant.conf or
+/etc/wpa_supplicant.conf once connected to the board:
+
+* Replace YOURSSID with your AP ssid
+* Replace YOURPASSWD with your AP password
+
+Bluetooth
+==========
+
+To make the device discoverable and pairable, once connected to the board:
+
+* bluetoothctl power on
+* bluetoothctl discoverable yes
+* bluetoothctl pairable yes
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Connect a TTL UART to the debug connector, insert the microSD card and
+plug in a USB-C cable to the PWR connector to boot the system.
new file mode 100644
@@ -0,0 +1,41 @@
+BR2_riscv=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+BR2_ROOTFS_OVERLAY="board/sipeed/lichee_rv/overlay board/sipeed/lichee_rv_dock/overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sipeed/lichee_rv_dock/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,linux,ca67838d84af4c9f85d06311c9e98e1adf46308f)/linux-ca67838d84af4c9f85d06311c9e98e1adf46308f.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="nezha"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun20i-d1-lichee-rv-dock"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/sipeed/lichee_rv_dock/linux.fragment"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_PACKAGE_RTL8723DS=y
+BR2_PACKAGE_RTL8723DS_BT=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_OPENSBI=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.1"
+BR2_TARGET_OPENSBI_PLAT="generic"
+# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,u-boot,528ae9bc6c55edd3ffe642734b4132a8246ea777)/uboot-528ae9bc6c55edd3ffe642734b4132a8246ea777.tar.gz"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="lichee_rv_dock"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_GENIMAGE=y