@@ -1032,7 +1032,9 @@ F: configs/qemu_*
N: Gilles Talis <gilles.talis@gmail.com>
F: board/freescale/imx8mmevk/
+F: board/friendlyarm/nanopi-r2s/
F: configs/freescale_imx8mmevk_defconfig
+F: configs/friendlyarm_nanopi_r2s_defconfig
F: package/cctz/
F: package/faad2/
F: package/fdk-aac/
new file mode 100644
@@ -0,0 +1,4 @@
+label NanoPi R2S linux
+ kernel /Image
+ devicetree /rk3328-nanopi-r2s.dtb
+ append root=/dev/mmcblk0p4 rw rootwait
new file mode 100644
@@ -0,0 +1,39 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "rk3328-nanopi-r2s.dtb",
+ "extlinux"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+
+ hdimage {
+ gpt = true
+ }
+
+ partition loader1 {
+ image = "idbloader.img"
+ offset = 32K
+ }
+
+ partition loader2 {
+ image = "u-boot.itb"
+ offset = 8M
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ offset = 16M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
new file mode 100755
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
new file mode 100644
@@ -0,0 +1,57 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Nanopi R2S. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Nanopi R2S link:
+https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282
+
+This configuration uses ATF, U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make friendlyarm_nanopi_r2s_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+Files created in output directory
+=================================
+
+output/images
+
+├── bl31.elf
+├── boot.vfat
+├── extlinux
+├── idbloader.img
+├── Image
+├── rk3328-nanopi-r2s.dtb
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── u-boot.bin
+└── u-boot.itb
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Nanopi R2S and power it up. The console
+is on the serial line, 1500000 8N1.
+
+Notes
+=====
+
+This configuration can also be used to drive the Friendlyarm Nanopi Neo3 board.
new file mode 100644
@@ -0,0 +1,33 @@
+BR2_aarch64=y
+BR2_ARM_FPU_VFPV4=y
+BR2_TARGET_GENERIC_HOSTNAME="rk3328-nanopi-r2s"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Nanopi R2S RK3328"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-r2s/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-r2s/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-nanopi-r2s"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-r2s-rk3328"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
The NanoPi R2S is a FriendlyElec mini-router based on: - Rockchip RK3328 SoC - 1GB (or 2GB) DDR4 RAM - Gigabit Ethernet (WAN) - Gigabit Ethernet (USB3) (LAN) - USB 2.0 Host Port - MicroSD slot - Reset button - WAN - LAN - SYS LED https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282 Signed-off-by: Gilles Talis <gilles.talis@gmail.com> --- DEVELOPERS | 2 + board/friendlyarm/nanopi-r2s/extlinux.conf | 4 ++ board/friendlyarm/nanopi-r2s/genimage.cfg | 39 +++++++++++++++ board/friendlyarm/nanopi-r2s/post-build.sh | 5 ++ board/friendlyarm/nanopi-r2s/readme.txt | 57 ++++++++++++++++++++++ configs/friendlyarm_nanopi_r2s_defconfig | 33 +++++++++++++ 6 files changed, 140 insertions(+) create mode 100644 board/friendlyarm/nanopi-r2s/extlinux.conf create mode 100644 board/friendlyarm/nanopi-r2s/genimage.cfg create mode 100755 board/friendlyarm/nanopi-r2s/post-build.sh create mode 100644 board/friendlyarm/nanopi-r2s/readme.txt create mode 100644 configs/friendlyarm_nanopi_r2s_defconfig