Message ID | 20191109152254.15562-1-unixmania@gmail.com |
---|---|
State | Accepted |
Headers | show |
Series | board/beaglebone: fix boot on BeagleBone Black | expand |
On Sat, 9 Nov 2019 12:22:54 -0300 unixmania@gmail.com wrote: > From: Carlos Santos <unixmania@gmail.com> > > Commit 68b5b79b2f has set the getty port to the default console but left > "ttyO0" in bootargs, in the U-Boot environment. Use "ttyS0", instead. > > Also set loadaddr to 0x82000000 and fdtaddr to 0x88000000, replacing the > values that were valid for the ancient U-Boot and Linux pre-installed on > old boards but cause boot hangs with the current versions. > > Signed-off-by: Carlos Santos <unixmania@gmail.com> > --- > CC: Thomas Petazzoni <thomas.petazzoni@bootlin.com> > CC: Lothar Felten <lothar.felten@gmail.com> > --- > Changes v1->v2: > - Clarify the explanation about old U-Boot versions in the commit > message. > --- > board/beaglebone/uEnv.txt | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) Applied to master, thanks. Thomas
>>>>> "unixmania" == unixmania <unixmania@gmail.com> writes: > From: Carlos Santos <unixmania@gmail.com> > Commit 68b5b79b2f has set the getty port to the default console but left > "ttyO0" in bootargs, in the U-Boot environment. Use "ttyS0", instead. > Also set loadaddr to 0x82000000 and fdtaddr to 0x88000000, replacing the > values that were valid for the ancient U-Boot and Linux pre-installed on > old boards but cause boot hangs with the current versions. > Signed-off-by: Carlos Santos <unixmania@gmail.com> > --- > CC: Thomas Petazzoni <thomas.petazzoni@bootlin.com> > CC: Lothar Felten <lothar.felten@gmail.com> > --- > Changes v1->v2: > - Clarify the explanation about old U-Boot versions in the commit > message. Committed to 2019.02.x and 2019.08.x, thanks.
diff --git a/board/beaglebone/uEnv.txt b/board/beaglebone/uEnv.txt index a665f20889..8fce54d87e 100644 --- a/board/beaglebone/uEnv.txt +++ b/board/beaglebone/uEnv.txt @@ -3,6 +3,9 @@ devtype=mmc bootdir= bootfile=zImage bootpartition=mmcblk0p2 +console=ttyS0,115200n8 +loadaddr=0x82000000 +fdtaddr=0x88000000 set_mmc1=if test $board_name = A33515BB; then setenv bootpartition mmcblk1p2; fi -set_bootargs=setenv bootargs console=ttyO0,115200n8 root=/dev/${bootpartition} rw rootfstype=ext4 rootwait +set_bootargs=setenv bootargs console=${console} root=/dev/${bootpartition} rw rootfstype=ext4 rootwait uenvcmd=run set_mmc1; run set_bootargs;run loadimage;run loadfdt;printenv bootargs;bootz ${loadaddr} - ${fdtaddr}