Message ID | 1521120291-15781-3-git-send-email-martin@barkynet.com |
---|---|
State | Superseded |
Headers | show |
Series | [1/4] package/rpi-firmware: bump version | expand |
Hi Martin, On Thu, Mar 15, 2018 at 01:24:50PM +0000, Martin Bark wrote: > diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt > index 9482693..9f91581 100644 > --- a/board/raspberrypi/readme.txt > +++ b/board/raspberrypi/readme.txt > @@ -30,7 +30,7 @@ For model 2 B: > > $ make raspberrypi2_defconfig > > -For model 3 B: > +For model 3 B and B+: This is quick. Have you tested on hardware? baruch
Hi Baruch, On 15 March 2018 at 13:33, Baruch Siach <baruch@tkos.co.il> wrote: > Hi Martin, > > On Thu, Mar 15, 2018 at 01:24:50PM +0000, Martin Bark wrote: >> diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt >> index 9482693..9f91581 100644 >> --- a/board/raspberrypi/readme.txt >> +++ b/board/raspberrypi/readme.txt >> @@ -30,7 +30,7 @@ For model 2 B: >> >> $ make raspberrypi2_defconfig >> >> -For model 3 B: >> +For model 3 B and B+: > > This is quick. Have you tested on hardware? I've testing it builds and runs on the rpi3 but not tested on a rpi3b+. I should get my rpi3b+ soon to verify this. The current kernel includes all the changes needed for the rpi3b+. To add support we just need to include the bcm2710-rpi-3-b-plus.dtb. Note that i don't see any updates to the arm64 defconfig for dtb files so raspberrypi3_64_defconfig will remain unchanged for now. Thanks Martin > > baruch > > -- > http://baruch.siach.name/blog/ ~. .~ Tk Open Systems > =}------------------------------------------------ooO--U--Ooo------------{= > - baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
diff --git a/board/raspberrypi/genimage-raspberrypi3.cfg b/board/raspberrypi/genimage-raspberrypi3.cfg index 98ff709..0a54724 100644 --- a/board/raspberrypi/genimage-raspberrypi3.cfg +++ b/board/raspberrypi/genimage-raspberrypi3.cfg @@ -2,6 +2,7 @@ image boot.vfat { vfat { files = { "bcm2710-rpi-3-b.dtb", + "bcm2710-rpi-3-b-plus.dtb", "bcm2710-rpi-cm3.dtb", "rpi-firmware/bootcode.bin", "rpi-firmware/cmdline.txt", diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt index 9482693..9f91581 100644 --- a/board/raspberrypi/readme.txt +++ b/board/raspberrypi/readme.txt @@ -30,7 +30,7 @@ For model 2 B: $ make raspberrypi2_defconfig -For model 3 B: +For model 3 B and B+: $ make raspberrypi3_defconfig @@ -56,6 +56,7 @@ After building, you should obtain this tree: +-- bcm2708-rpi-b-plus.dtb [1] +-- bcm2709-rpi-2-b.dtb [1] +-- bcm2710-rpi-3-b.dtb [1] + +-- bcm2710-rpi-3-b-plus.dtb [1] +-- boot.vfat +-- rootfs.ext4 +-- rpi-firmware/ diff --git a/configs/raspberrypi3_defconfig b/configs/raspberrypi3_defconfig index 2fb46d3..40585da 100644 --- a/configs/raspberrypi3_defconfig +++ b/configs/raspberrypi3_defconfig @@ -17,7 +17,7 @@ BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" # Build the DTB from the kernel sources BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-cm3" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3" BR2_PACKAGE_RPI_FIRMWARE=y diff --git a/configs/raspberrypi3_qt5we_defconfig b/configs/raspberrypi3_qt5we_defconfig index dc1bf7f..7830065 100644 --- a/configs/raspberrypi3_qt5we_defconfig +++ b/configs/raspberrypi3_qt5we_defconfig @@ -18,7 +18,7 @@ BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" # Build the DTB from the kernel sources BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-cm3" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3" # Build Qt5 WebEngine BR2_PACKAGE_LIBERATION=y
Signed-off-by: Martin Bark <martin@barkynet.com> --- board/raspberrypi/genimage-raspberrypi3.cfg | 1 + board/raspberrypi/readme.txt | 3 ++- configs/raspberrypi3_defconfig | 2 +- configs/raspberrypi3_qt5we_defconfig | 2 +- 4 files changed, 5 insertions(+), 3 deletions(-)