Message ID | 1471791606-13449-1-git-send-email-guillaume.bressaix@gmail.com |
---|---|
State | Accepted |
Headers | show |
Hi Guillaume W. Bres, On Sun, Aug 21, 2016 at 05:00:06PM +0200, Guillaume W. Bres wrote: > readme.txt could use a little more information on what to install > and how to install it. I simply copied the content of > board/acmesystems/arietta-g25/readme.txt. Have you tested that following these instructions lead to a working BeagleBone system? baruch > Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com> > --- > board/beaglebone/readme.txt | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/board/beaglebone/readme.txt b/board/beaglebone/readme.txt > index 43ebe53..664bde2 100644 > --- a/board/beaglebone/readme.txt > +++ b/board/beaglebone/readme.txt > @@ -32,3 +32,13 @@ After building, you should get a tree like this: > ├── u-boot.img > ├── uEnv.txt > └── zImage > + > +How to write the microSD card > +============================= > + > +Once the build process is finished you will have an image called "sdcard.img" > +in the output/images/ directory. > + > +Copy the bootable "sdcard.img" onto an SD card with "dd": > + > + $ sudo dd if=output/images/sdcard.img of=/dev/sdX
> > Have you tested that following these instructions lead to a working > BeagleBone > system? > > baruch yes it works perfectly fine Guillaume William Bres-Saix Software engineer - NIST 325 Broadway, Boulder, CO 80305 <guillaume.bressaix@gmail.com> 2016-08-21 17:11 GMT+02:00 Baruch Siach <baruch@tkos.co.il>: > Hi Guillaume W. Bres, > > On Sun, Aug 21, 2016 at 05:00:06PM +0200, Guillaume W. Bres wrote: > > readme.txt could use a little more information on what to install > > and how to install it. I simply copied the content of > > board/acmesystems/arietta-g25/readme.txt. > > Have you tested that following these instructions lead to a working > BeagleBone > system? > > baruch > > > Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com> > > --- > > board/beaglebone/readme.txt | 10 ++++++++++ > > 1 file changed, 10 insertions(+) > > > > diff --git a/board/beaglebone/readme.txt b/board/beaglebone/readme.txt > > index 43ebe53..664bde2 100644 > > --- a/board/beaglebone/readme.txt > > +++ b/board/beaglebone/readme.txt > > @@ -32,3 +32,13 @@ After building, you should get a tree like this: > > ├── u-boot.img > > ├── uEnv.txt > > └── zImage > > + > > +How to write the microSD card > > +============================= > > + > > +Once the build process is finished you will have an image called > "sdcard.img" > > +in the output/images/ directory. > > + > > +Copy the bootable "sdcard.img" onto an SD card with "dd": > > + > > + $ sudo dd if=output/images/sdcard.img of=/dev/sdX > > -- > http://baruch.siach.name/blog/ ~. .~ Tk Open > Systems > =}------------------------------------------------ooO--U-- > Ooo------------{= > - baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il - >
Hi Guillaume, On Sun, Aug 21, 2016 at 07:15:41PM +0200, Guillaume William Bres wrote: > > Have you tested that following these instructions lead to a working > > BeagleBone > > system? > > yes it works perfectly fine Great. You should mention it in the commit log then. baruch
diff --git a/board/beaglebone/readme.txt b/board/beaglebone/readme.txt index 43ebe53..664bde2 100644 --- a/board/beaglebone/readme.txt +++ b/board/beaglebone/readme.txt @@ -32,3 +32,13 @@ After building, you should get a tree like this: ├── u-boot.img ├── uEnv.txt └── zImage + +How to write the microSD card +============================= + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX
readme.txt could use a little more information on what to install and how to install it. I simply copied the content of board/acmesystems/arietta-g25/readme.txt. Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com> --- board/beaglebone/readme.txt | 10 ++++++++++ 1 file changed, 10 insertions(+)