Message ID | 1449755560-2911-3-git-send-email-gary.bisson@boundarydevices.com |
---|---|
State | Superseded |
Headers | show |
Gary, All, On 2015-12-10 14:52 +0100, Gary Bisson spake thusly: > Enable VPU and hard float support when the proper configuration is setup. > BR2_ARM_EABIHF=y > BR2_PACKAGE_IMX_VPU=y > > See Yocto equivalent: > https://github.com/Freescale/meta-fsl-arm/blob/fido/recipes- > multimedia/libfslcodec/libfslcodec.inc > > Tested with the Linaro ARM 2014.09 toolchain. > > Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> > --- > > Thanks to those options, I could see that: > - lib_jpeg_dec_arm11_elinux_novpu.so isn't copied > - lib_peq_arm11_elinux.so.1.fhw is copied instead of the fsw version > > Regards, > Gary > > --- > package/libfslcodec/libfslcodec.mk | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/package/libfslcodec/libfslcodec.mk b/package/libfslcodec/libfslcodec.mk > index f8c6aa8..05e5edb 100644 > --- a/package/libfslcodec/libfslcodec.mk > +++ b/package/libfslcodec/libfslcodec.mk > @@ -13,6 +13,14 @@ LIBFSLCODEC_LICENSE = Freescale Semiconductor Software License Agreement, BSD-3c > LIBFSLCODEC_LICENSE_FILES = EULA COPYING > LIBFSLCODEC_REDISTRIBUTE = NO > > +ifeq ($(BR2_ARM_EABIHF),y) > +LIBFSLCODEC_CONF_OPTS += --enable-fhw > +endif What about adding --disable-fhw when not EABIhf? > +ifeq ($(BR2_PACKAGE_IMX_VPU),y) > +LIBFSLCODEC_CONF_OPTS += --enable-vpu > +endif Ditto when imx-vpu is not enabled? Regards, Yann E. MORIN. > define LIBFSLCODEC_EXTRACT_CMDS > $(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(LIBFSLCODEC_SOURCE)) > endef > -- > 2.6.2 > > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot
Yann, All, On Sun, Dec 13, 2015 at 09:32:24PM +0100, Yann E. MORIN wrote: > Gary, All, > > On 2015-12-10 14:52 +0100, Gary Bisson spake thusly: > > Enable VPU and hard float support when the proper configuration is setup. > > BR2_ARM_EABIHF=y > > BR2_PACKAGE_IMX_VPU=y > > > > See Yocto equivalent: > > https://github.com/Freescale/meta-fsl-arm/blob/fido/recipes- > > multimedia/libfslcodec/libfslcodec.inc > > > > Tested with the Linaro ARM 2014.09 toolchain. > > > > Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> > > --- > > > > Thanks to those options, I could see that: > > - lib_jpeg_dec_arm11_elinux_novpu.so isn't copied > > - lib_peq_arm11_elinux.so.1.fhw is copied instead of the fsw version > > > > Regards, > > Gary > > > > --- > > package/libfslcodec/libfslcodec.mk | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/package/libfslcodec/libfslcodec.mk b/package/libfslcodec/libfslcodec.mk > > index f8c6aa8..05e5edb 100644 > > --- a/package/libfslcodec/libfslcodec.mk > > +++ b/package/libfslcodec/libfslcodec.mk > > @@ -13,6 +13,14 @@ LIBFSLCODEC_LICENSE = Freescale Semiconductor Software License Agreement, BSD-3c > > LIBFSLCODEC_LICENSE_FILES = EULA COPYING > > LIBFSLCODEC_REDISTRIBUTE = NO > > > > +ifeq ($(BR2_ARM_EABIHF),y) > > +LIBFSLCODEC_CONF_OPTS += --enable-fhw > > +endif > > What about adding --disable-fhw when not EABIhf? The configure only looks for enable-fhw and therefore considers the features is disabled by default. > > +ifeq ($(BR2_PACKAGE_IMX_VPU),y) > > +LIBFSLCODEC_CONF_OPTS += --enable-vpu > > +endif > > Ditto when imx-vpu is not enabled? Same here for the vpu option, configure only looks for the enable option. Regards, Gary
Yann, All, On Mon, Dec 14, 2015 at 10:28:54PM +0100, Gary Bisson wrote: > Yann, All, > > On Sun, Dec 13, 2015 at 09:32:24PM +0100, Yann E. MORIN wrote: > > Gary, All, > > > > On 2015-12-10 14:52 +0100, Gary Bisson spake thusly: > > > Enable VPU and hard float support when the proper configuration is setup. > > > BR2_ARM_EABIHF=y > > > BR2_PACKAGE_IMX_VPU=y > > > > > > See Yocto equivalent: > > > https://github.com/Freescale/meta-fsl-arm/blob/fido/recipes- > > > multimedia/libfslcodec/libfslcodec.inc > > > > > > Tested with the Linaro ARM 2014.09 toolchain. > > > > > > Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> > > > --- > > > > > > Thanks to those options, I could see that: > > > - lib_jpeg_dec_arm11_elinux_novpu.so isn't copied > > > - lib_peq_arm11_elinux.so.1.fhw is copied instead of the fsw version > > > > > > Regards, > > > Gary > > > > > > --- > > > package/libfslcodec/libfslcodec.mk | 8 ++++++++ > > > 1 file changed, 8 insertions(+) > > > > > > diff --git a/package/libfslcodec/libfslcodec.mk b/package/libfslcodec/libfslcodec.mk > > > index f8c6aa8..05e5edb 100644 > > > --- a/package/libfslcodec/libfslcodec.mk > > > +++ b/package/libfslcodec/libfslcodec.mk > > > @@ -13,6 +13,14 @@ LIBFSLCODEC_LICENSE = Freescale Semiconductor Software License Agreement, BSD-3c > > > LIBFSLCODEC_LICENSE_FILES = EULA COPYING > > > LIBFSLCODEC_REDISTRIBUTE = NO > > > > > > +ifeq ($(BR2_ARM_EABIHF),y) > > > +LIBFSLCODEC_CONF_OPTS += --enable-fhw > > > +endif > > > > What about adding --disable-fhw when not EABIhf? > > The configure only looks for enable-fhw and therefore considers the > features is disabled by default. > > > > +ifeq ($(BR2_PACKAGE_IMX_VPU),y) > > > +LIBFSLCODEC_CONF_OPTS += --enable-vpu > > > +endif > > > > Ditto when imx-vpu is not enabled? > > Same here for the vpu option, configure only looks for the enable > option. Sorry for reviving this thread (again), but I was thinking that maybe we could merge the two "missing configure options" patches from the series since they do not depend on the libraries location fix. Then I could offer another version of the series with only the path fix. I'm still unclear on which option would get those patches approved. I understand the symbolic links aren't great. I'm considering removing gst-fsl-plugins for GStreamer0.10 since Yocto did it: https://github.com/Freescale/meta-fsl-arm/commit/83b240e7 Let me know your thoughts. Thanks, Gary
diff --git a/package/libfslcodec/libfslcodec.mk b/package/libfslcodec/libfslcodec.mk index f8c6aa8..05e5edb 100644 --- a/package/libfslcodec/libfslcodec.mk +++ b/package/libfslcodec/libfslcodec.mk @@ -13,6 +13,14 @@ LIBFSLCODEC_LICENSE = Freescale Semiconductor Software License Agreement, BSD-3c LIBFSLCODEC_LICENSE_FILES = EULA COPYING LIBFSLCODEC_REDISTRIBUTE = NO +ifeq ($(BR2_ARM_EABIHF),y) +LIBFSLCODEC_CONF_OPTS += --enable-fhw +endif + +ifeq ($(BR2_PACKAGE_IMX_VPU),y) +LIBFSLCODEC_CONF_OPTS += --enable-vpu +endif + define LIBFSLCODEC_EXTRACT_CMDS $(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(LIBFSLCODEC_SOURCE)) endef
Enable VPU and hard float support when the proper configuration is setup. BR2_ARM_EABIHF=y BR2_PACKAGE_IMX_VPU=y See Yocto equivalent: https://github.com/Freescale/meta-fsl-arm/blob/fido/recipes- multimedia/libfslcodec/libfslcodec.inc Tested with the Linaro ARM 2014.09 toolchain. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> --- Thanks to those options, I could see that: - lib_jpeg_dec_arm11_elinux_novpu.so isn't copied - lib_peq_arm11_elinux.so.1.fhw is copied instead of the fsw version Regards, Gary --- package/libfslcodec/libfslcodec.mk | 8 ++++++++ 1 file changed, 8 insertions(+)