@@ -10,19 +10,19 @@ web site.
Note that the default Buildroot configuration is prepared to boot from
an SD card: the first stage bootloader, second stage bootloader,
kernel image and root filesystem are all located on the SD card. Some
-adjustements in the bootloader configuration will be needed to boot
-from NAND flash.
+adjustments in the bootloader configuration will be needed to boot
+from NAND flash, see board/atmel/nandflash.txt
Configuring and building Buildroot
----------------------------------
- make atmel_xplained_defconfig
+ make atmel_sama5d3_xplained_mmc_defconfig
make
Preparing the SD card
---------------------
-The SD card must be partitionned with at least two partitions: one
+The SD card must be partitioned with at least two partitions: one
FAT16 partition for the bootloaders, kernel image and Device Tree
blob, and one ext4 partition for the root filesystem. To partition the
SD card:
similarity index 100%
rename from configs/atmel_xplained_defconfig
rename to configs/atmel_sama5d3_xplained_mmc_defconfig
For consistency, rename atmel_xplained_defconfig to atmel_sama5d3_xplained_mmc_defconfig as this configuration supports booting the sama5d3 Xplained with an MMC card (as opposed to the NAND flash). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> --- board/atmel/xplained/readme.txt | 8 ++++---- ...el_xplained_defconfig => atmel_sama5d3_xplained_mmc_defconfig} | 0 2 files changed, 4 insertions(+), 4 deletions(-) rename configs/{atmel_xplained_defconfig => atmel_sama5d3_xplained_mmc_defconfig} (100%)