Message ID | 1352742102-19010-7-git-send-email-gregory.hermant@calao-systems.com |
---|---|
State | Superseded |
Headers | show |
On 11/12/12 18:41, Gregory Hermant wrote: > > Signed-off-by: Gregory Hermant<gregory.hermant@calao-systems.com> > --- > configs/calao_snowball_defconfig | 49 ++++++++++++++++++++++++++++++++++++++ > 1 file changed, 49 insertions(+) > create mode 100644 configs/calao_snowball_defconfig > > diff --git a/configs/calao_snowball_defconfig b/configs/calao_snowball_defconfig > new file mode 100644 > index 0000000..e5e67bf > --- /dev/null > +++ b/configs/calao_snowball_defconfig > @@ -0,0 +1,49 @@ > +BR2_arm=y > +BR2_cortex_a9=y > +BR2_GCC_VERSION_4_7_X=y > +# BR2_SOFT_FLOAT is not set > +BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y > +BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y > +BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y > +BR2_TOOLCHAIN_BUILDROOT_LOCALE=y > +BR2_TOOLCHAIN_BUILDROOT_CXX=y > +BR2_VFP_FLOAT=y > +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y > +BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA2" > +BR2_PACKAGE_BUSYBOX_CONFIG="board/calao/snowball/busybox-1.20.x.config" > +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y > +BR2_PACKAGE_BZIP2=y > +BR2_PACKAGE_FBSET=y > +BR2_PACKAGE_FBTERM=y > +BR2_PACKAGE_HDMISERVICE=y > +BR2_PACKAGE_MINICOM=y > +BR2_PACKAGE_LUA=y > +BR2_PACKAGE_OPENSSL=y > +BR2_PACKAGE_SQLITE=y > +BR2_PACKAGE_JPEG=y > +BR2_PACKAGE_LIBPNG=y > +BR2_PACKAGE_LIBUNGIF=y > +BR2_PACKAGE_LIBELF=y > +BR2_PACKAGE_PCRE=y > +BR2_PACKAGE_LIBXML2=y > +BR2_PACKAGE_SNOWBALL_INIT=y > +BR2_PACKAGE_IW=y > +BR2_PACKAGE_WGET=y I have the feeling that I've said this before, but: are all of these really needed? I can't imagine why you'd want anything that is also already provided by busybox; I don't see why you'd need minicom or lua in a minimal configuration; all the libraries make no sense if there no package using them, but then that package should select them. For the wireless packages below I'm willing to make an exception (though I'm not sure why the lib is needed). > +BR2_PACKAGE_WIRELESS_TOOLS=y > +BR2_PACKAGE_WIRELESS_TOOLS_LIB=y > +BR2_PACKAGE_WPA_SUPPLICANT=y > +BR2_PACKAGE_WPA_SUPPLICANT_EAP=y > +BR2_PACKAGE_WPA_SUPPLICANT_CLI=y > +BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y > +BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y > +BR2_PACKAGE_WPA_SUPPLICANT_WPS=y > +BR2_TARGET_ROOTFS_TAR_GZIP=y I thought the idea was to put it on an SD card? Then it makes more sense to build an ext2 fs, no? Regards, Arnout > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BOARDNAME="snowball" > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_GIT=y > +BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://igloocommunity.org/git/kernel/igloo-kernel.git" > +BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="stable-linux-ux500-3.4" > +BR2_LINUX_KERNEL_PATCH="board/calao/snowball/" > +BR2_LINUX_KERNEL_DEFCONFIG="u8500" > +BR2_LINUX_KERNEL_INSTALL_TARGET=y
diff --git a/configs/calao_snowball_defconfig b/configs/calao_snowball_defconfig new file mode 100644 index 0000000..e5e67bf --- /dev/null +++ b/configs/calao_snowball_defconfig @@ -0,0 +1,49 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_GCC_VERSION_4_7_X=y +# BR2_SOFT_FLOAT is not set +BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y +BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y +BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y +BR2_TOOLCHAIN_BUILDROOT_LOCALE=y +BR2_TOOLCHAIN_BUILDROOT_CXX=y +BR2_VFP_FLOAT=y +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA2" +BR2_PACKAGE_BUSYBOX_CONFIG="board/calao/snowball/busybox-1.20.x.config" +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y +BR2_PACKAGE_BZIP2=y +BR2_PACKAGE_FBSET=y +BR2_PACKAGE_FBTERM=y +BR2_PACKAGE_HDMISERVICE=y +BR2_PACKAGE_MINICOM=y +BR2_PACKAGE_LUA=y +BR2_PACKAGE_OPENSSL=y +BR2_PACKAGE_SQLITE=y +BR2_PACKAGE_JPEG=y +BR2_PACKAGE_LIBPNG=y +BR2_PACKAGE_LIBUNGIF=y +BR2_PACKAGE_LIBELF=y +BR2_PACKAGE_PCRE=y +BR2_PACKAGE_LIBXML2=y +BR2_PACKAGE_SNOWBALL_INIT=y +BR2_PACKAGE_IW=y +BR2_PACKAGE_WGET=y +BR2_PACKAGE_WIRELESS_TOOLS=y +BR2_PACKAGE_WIRELESS_TOOLS_LIB=y +BR2_PACKAGE_WPA_SUPPLICANT=y +BR2_PACKAGE_WPA_SUPPLICANT_EAP=y +BR2_PACKAGE_WPA_SUPPLICANT_CLI=y +BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y +BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y +BR2_PACKAGE_WPA_SUPPLICANT_WPS=y +BR2_TARGET_ROOTFS_TAR_GZIP=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="snowball" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://igloocommunity.org/git/kernel/igloo-kernel.git" +BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="stable-linux-ux500-3.4" +BR2_LINUX_KERNEL_PATCH="board/calao/snowball/" +BR2_LINUX_KERNEL_DEFCONFIG="u8500" +BR2_LINUX_KERNEL_INSTALL_TARGET=y
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com> --- configs/calao_snowball_defconfig | 49 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 configs/calao_snowball_defconfig