diff mbox

[4/5] libata: Report zeroed read after Trim and max discard size

Message ID 1259254843-8326-5-git-send-email-martin.petersen@oracle.com
State Not Applicable
Delegated to: David Miller
Headers show

Commit Message

Martin K. Petersen Nov. 26, 2009, 5 p.m. UTC 
Our current Trim payload is a single sector that can accommodate 64 *
65535 blocks being unmapped.  Report this value in the Block Limits
Maximum Unmap LBA count field.

If a storage device supports Trim and the DRAT and RZAT bits are set,
report TPRZ=1 in Read Capacity(16).

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 drivers/ata/libata-scsi.c |   12 +++++++++---
 include/linux/ata.h       |   10 ++++++++++
 2 files changed, 19 insertions(+), 3 deletions(-)

Comments

Mark Lord Nov. 27, 2009, 1:55 a.m. UTC | #1 
Martin K. Petersen wrote:
..
> If a storage device supports Trim and the DRAT and RZAT bits are set,
> report TPRZ=1 in Read Capacity(16).
..
> +static inline int ata_id_has_zero_after_trim(const u16 *id)
> +{
> +	/* DSM supported, deterministic read, and read zero after trim set */
> +	if (ata_id_has_trim(id) && id[ATA_ID_ADDITIONAL_SUPP] & 0x4020)
> +		return 1;
..

Is that correct, or should it be this:

        if (ata_id_has_trim(id) && (id[ATA_ID_ADDITIONAL_SUPP] & 0x4020) == 0x4020)

??
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e0995c4..08d4ab7 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2116,8 +2116,10 @@  static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf)
 	 * that we support some form of unmap - in thise case via WRITE SAME
 	 * with the unmap bit set.
 	 */
-	if (ata_id_has_trim(args->id))
+	if (ata_id_has_trim(args->id)) {
+		put_unaligned_be32(65535 * 512 / 8, &rbuf[20]);
 		put_unaligned_be32(1, &rbuf[28]);
+	}
 
 	return 0;
 }
@@ -2412,8 +2414,12 @@  static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
 		rbuf[14] = (lowest_aligned >> 8) & 0x3f;
 		rbuf[15] = lowest_aligned;
 
-		if (ata_id_has_trim(args->id))
-			rbuf[14] |= 0x80;
+		if (ata_id_has_trim(args->id)) {
+			rbuf[14] |= 0x80; /* TPE */
+
+			if (ata_id_has_zero_after_trim(args->id))
+				rbuf[14] |= 0x40; /* TPRZ */
+		}
 	}
 
 	return 0;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index e2595e8..b18b2bb 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -75,6 +75,7 @@  enum {
 	ATA_ID_EIDE_DMA_TIME	= 66,
 	ATA_ID_EIDE_PIO		= 67,
 	ATA_ID_EIDE_PIO_IORDY	= 68,
+	ATA_ID_ADDITIONAL_SUPP	= 69,
 	ATA_ID_QUEUE_DEPTH	= 75,
 	ATA_ID_MAJOR_VER	= 80,
 	ATA_ID_COMMAND_SET_1	= 82,
@@ -816,6 +817,15 @@  static inline int ata_id_has_trim(const u16 *id)
 	return 0;
 }
 
+static inline int ata_id_has_zero_after_trim(const u16 *id)
+{
+	/* DSM supported, deterministic read, and read zero after trim set */
+	if (ata_id_has_trim(id) && id[ATA_ID_ADDITIONAL_SUPP] & 0x4020)
+		return 1;
+
+	return 0;
+}
+
 static inline int ata_id_current_chs_valid(const u16 *id)
 {
 	/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command