Message ID | 1413879890-7254-2-git-send-email-hdegoede@redhat.com |
---|---|
State | New |
Headers | show |
Hi Hans, Thanks, a lot for respinning this. On Tue, Oct 21, 2014 at 10:24:47AM +0200, Hans de Goede wrote: > Allwinnner sunxi SoCs have a low resolution adc (called lradc) which is > specifically designed to have various (tablet) keys (ie home, back, search, > etc). attached to it using a resistor network. This adds a driver for this. > > There are 2 channels, currently this driver only supports chan0 since there > are no boards known to use chan1. > > This has been tested on an olimex a10s-olinuxino-micro, a13-olinuxino, and > a20-olinuxino-micro. > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > -- > Changes in v2: > -Change devicetree bindings to use a per key subnode, like gpio-keys does > --- > .../devicetree/bindings/input/sun4i-lradc-keys.txt | 57 +++++ > MAINTAINERS | 7 + > drivers/input/keyboard/Kconfig | 10 + > drivers/input/keyboard/Makefile | 1 + > drivers/input/keyboard/sun4i-lradc-keys.c | 259 +++++++++++++++++++++ > 5 files changed, 334 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt > create mode 100644 drivers/input/keyboard/sun4i-lradc-keys.c > > diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt > new file mode 100644 > index 0000000..36a141b > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt > @@ -0,0 +1,57 @@ > +Allwinner sun4i low res adc attached tablet keys > +------------------------------------------------ > + > +Required properties: > + - compatible: "allwinner,sun4i-lradc-keys" > + - reg: mmio address range of the chip > + - interrupts: interrupt to which the chip is connected > + - vref-supply: powersupply for the lradc reference voltage > + > +Each key is represented as a sub-node of "allwinner,sun4i-lradc-keys": > + > +Required subnode-properties: > + - label: Descriptive name of the key. > + - linux,code: Keycode to emit. > + - channel: Channel this key is attached to, mut be 0 or 1. > + - voltage: Voltage in µV at lradc input when this key is pressed. > + > +Example: > + > +#include <dt-bindings/input/input.h> > + > + lradc: lradc@01c22800 { > + compatible = "allwinner,sun4i-lradc-keys"; You're still using the old pattern for the compatible here, it should be allwinner,sun4i-a10-lradc-keys. > + reg = <0x01c22800 0x100>; > + interrupts = <31>; > + vref-supply = <®_vcc3v0>; > + button@19 { I guess the node address in centivolts aren't really that common, maybe in mV instead? > + label = "Volume Up"; > + linux,code = <KEY_VOLUMEUP>; > + channel = <0>; > + voltage = <191274>; > + }; And a newline between the nodes please. > + button@39 { > + label = "Volume Down"; > + linux,code = <KEY_VOLUMEDOWN>; > + channel = <0>; > + voltage = <392644>; > + }; > + button@60 { > + label = "Menu"; > + linux,code = <KEY_MENU>; > + channel = <0>; > + voltage = <601151>; > + }; > + button@80 { > + label = "Enter"; > + linux,code = <KEY_ENTER>; > + channel = <0>; > + voltage = <795090>; > + }; > + button@98 { > + label = "Home"; > + linux,code = <KEY_HOME>; > + channel = <0>; > + voltage = <987387>; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index a20df9b..73d1aef 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -8932,6 +8932,13 @@ F: arch/m68k/sun3*/ > F: arch/m68k/include/asm/sun3* > F: drivers/net/ethernet/i825xx/sun3* > > +SUN4I LOW RES ADC ATTACHED TABLET KEYS DRIVER > +M: Hans de Goede <hdegoede@redhat.com> > +L: linux-input@vger.kernel.org > +S: Maintained > +F: Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt > +F: drivers/input/keyboard/sun4i-lradc-keys.c > + > SUNDANCE NETWORK DRIVER > M: Denis Kirjanov <kda@linux-powerpc.org> > L: netdev@vger.kernel.org > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index a3958c6..2d11b44 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -567,6 +567,16 @@ config KEYBOARD_STMPE > To compile this driver as a module, choose M here: the module will be > called stmpe-keypad. > > +config KEYBOARD_SUN4I_LRADC > + tristate "Allwinner sun4i low res adc attached tablet keys support" > + depends on ARCH_SUNXI > + help > + This selects support for the Allwinner low res adc attached tablet > + keys found on Allwinner sunxi SoCs. > + > + To compile this driver as a module, choose M here: the > + module will be called sun4i-lradc-keys. > + > config KEYBOARD_DAVINCI > tristate "TI DaVinci Key Scan" > depends on ARCH_DAVINCI_DM365 > diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile > index 0a33456..a35269a 100644 > --- a/drivers/input/keyboard/Makefile > +++ b/drivers/input/keyboard/Makefile > @@ -53,6 +53,7 @@ obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o > obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o > obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o > obj-$(CONFIG_KEYBOARD_ST_KEYSCAN) += st-keyscan.o > +obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o > obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o > obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o > obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o > diff --git a/drivers/input/keyboard/sun4i-lradc-keys.c b/drivers/input/keyboard/sun4i-lradc-keys.c > new file mode 100644 > index 0000000..63a1aff > --- /dev/null > +++ b/drivers/input/keyboard/sun4i-lradc-keys.c > @@ -0,0 +1,259 @@ > +/* > + * Allwinner sun4i low res adc attached tablet keys driver > + * > + * Copyright (C) 2014 Hans de Goede <hdegoede@redhat.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +/* > + * Allwinnner sunxi SoCs have a lradc which is specifically designed to have > + * various (tablet) keys (ie home, back, search, etc). attached to it using > + * a resistor network. This driver is for the keys on such boards. > + * > + * There are 2 channels, currently this driver only supports channel 0 since > + * there are no boards known to use channel 1. > + */ > + > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/input.h> > +#include <linux/interrupt.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > +#include <linux/regulator/consumer.h> > +#include <linux/slab.h> > + > +#define LRADC_CTRL 0x00 > +#define LRADC_INTC 0x04 > +#define LRADC_INTS 0x08 > +#define LRADC_DATA0 0x0c > +#define LRADC_DATA1 0x10 > + > +/* LRADC_CTRL bits */ > +#define FIRST_CONVERT_DLY(x) ((x) << 24) /* 8 bits */ > +#define CHAN_SELECT(x) ((x) << 22) /* 2 bits */ > +#define CONTINUE_TIME_SEL(x) ((x) << 16) /* 4 bits */ > +#define KEY_MODE_SEL(x) ((x) << 12) /* 2 bits */ > +#define LEVELA_B_CNT(x) ((x) << 8) /* 4 bits */ > +#define HOLD_EN(x) ((x) << 6) > +#define LEVELB_VOL(x) ((x) << 4) /* 2 bits */ > +#define SAMPLE_RATE(x) ((x) << 2) /* 2 bits */ > +#define ENABLE(x) ((x) << 0) > + > +/* LRADC_INTC and LRADC_INTS bits */ > +#define CHAN1_KEYUP_IRQ BIT(12) > +#define CHAN1_ALRDY_HOLD_IRQ BIT(11) > +#define CHAN1_HOLD_IRQ BIT(10) > +#define CHAN1_KEYDOWN_IRQ BIT(9) > +#define CHAN1_DATA_IRQ BIT(8) > +#define CHAN0_KEYUP_IRQ BIT(4) > +#define CHAN0_ALRDY_HOLD_IRQ BIT(3) > +#define CHAN0_HOLD_IRQ BIT(2) > +#define CHAN0_KEYDOWN_IRQ BIT(1) > +#define CHAN0_DATA_IRQ BIT(0) > + > +struct sun4i_lradc_keymap { > + u32 voltage; > + u32 keycode; > +}; > + > +struct sun4i_lradc_data { > + struct device *dev; > + struct input_dev *input; > + void __iomem *base; > + struct regulator *vref_supply; > + struct sun4i_lradc_keymap *chan0_map; > + u32 chan0_map_count; > + u32 chan0_keycode; > + u32 vref; > +}; > + > +static irqreturn_t sun4i_lradc_irq(int irq, void *dev_id) > +{ > + struct sun4i_lradc_data *lradc = dev_id; > + u32 i, ints, val, voltage, diff, keycode = 0, closest = 0xffffffff; > + > + ints = readl(lradc->base + LRADC_INTS); > + > + /* > + * lradc supports only one keypress at a time, release does not give > + * any info as to which key was released, so we cache the keycode. > + */ > + if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) { > + val = readl(lradc->base + LRADC_DATA0) & 0x3f; > + voltage = val * lradc->vref / 63; > + > + for (i = 0; i < lradc->chan0_map_count; i++) { > + diff = abs(lradc->chan0_map[i].voltage - voltage); > + if (diff < closest) { > + closest = diff; > + keycode = lradc->chan0_map[i].keycode; > + } > + } > + > + lradc->chan0_keycode = keycode; > + input_report_key(lradc->input, lradc->chan0_keycode, 1); > + } > + > + if (ints & CHAN0_KEYUP_IRQ) { > + input_report_key(lradc->input, lradc->chan0_keycode, 0); > + lradc->chan0_keycode = 0; > + } > + > + input_sync(lradc->input); > + > + writel(ints, lradc->base + LRADC_INTS); > + > + return IRQ_HANDLED; > +} > + > +static int sun4i_lradc_open(struct input_dev *dev) > +{ > + struct sun4i_lradc_data *lradc = input_get_drvdata(dev); > + int ret; > + > + ret = regulator_enable(lradc->vref_supply); > + if (ret) > + return ret; > + > + /* lradc Vref internally is divided by 2/3 */ > + lradc->vref = regulator_get_voltage(lradc->vref_supply) * 2 / 3; > + > + /* > + * Set sample time to 4 ms / 250 Hz. Wait 2 * 4 ms for key to > + * stabilize on press, wait (1 + 1) * 4 ms for key release > + */ > + writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | > + SAMPLE_RATE(0) | ENABLE(1), lradc->base + LRADC_CTRL); > + > + writel(CHAN0_KEYUP_IRQ | CHAN0_KEYDOWN_IRQ, lradc->base + LRADC_INTC); > + > + return 0; > +} > + > +static void sun4i_lradc_close(struct input_dev *dev) > +{ > + struct sun4i_lradc_data *lradc = input_get_drvdata(dev); > + > + /* Disable lradc, leave other settings unchanged */ > + writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | > + SAMPLE_RATE(2), lradc->base + LRADC_CTRL); > + writel(0, lradc->base + LRADC_INTC); > + > + regulator_disable(lradc->vref_supply); > +} > + > +static int sun4i_lradc_probe(struct platform_device *pdev) > +{ > + struct sun4i_lradc_data *lradc; > + struct device *dev = &pdev->dev; > + struct device_node *pp, *np = dev->of_node; > + u32 channel; > + int i, ret; > + > + lradc = devm_kzalloc(dev, sizeof(struct sun4i_lradc_data), GFP_KERNEL); > + if (!lradc) > + return -ENOMEM; > + > + lradc->chan0_map_count = of_get_child_count(np); > + lradc->chan0_map = devm_kmalloc(dev, lradc->chan0_map_count * > + sizeof(struct sun4i_lradc_keymap), GFP_KERNEL); > + if (!lradc->chan0_map) > + return -ENOMEM; > + > + i = 0; > + for_each_child_of_node(np, pp) { > + struct sun4i_lradc_keymap *map = &lradc->chan0_map[i]; > + > + ret = of_property_read_u32(pp, "channel", &channel); > + if (ret || channel != 0) { > + dev_err(dev, "%s: Inval channel prop\n", pp->name); > + return -EINVAL; > + } > + > + ret = of_property_read_u32(pp, "voltage", &map->voltage); > + if (ret) { > + dev_err(dev, "%s: Inval voltage prop\n", pp->name); > + return -EINVAL; > + } > + > + ret = of_property_read_u32(pp, "linux,code", &map->keycode); > + if (ret) { > + dev_err(dev, "%s: Inval linux,code prop\n", pp->name); > + return -EINVAL; > + } > + > + i++; > + } > + > + lradc->vref_supply = devm_regulator_get(dev, "vref"); > + if (IS_ERR(lradc->vref_supply)) > + return PTR_ERR(lradc->vref_supply); > + > + lradc->dev = dev; > + lradc->input = devm_input_allocate_device(dev); > + if (!lradc->input) > + return -ENOMEM; > + > + lradc->input->name = pdev->name; > + lradc->input->phys = "sun4i_lradc/input0"; > + lradc->input->open = sun4i_lradc_open; > + lradc->input->close = sun4i_lradc_close; > + lradc->input->id.bustype = BUS_HOST; > + lradc->input->id.vendor = 0x0001; > + lradc->input->id.product = 0x0001; > + lradc->input->id.version = 0x0100; > + lradc->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY); > + for (i = 0; i < lradc->chan0_map_count; i++) > + set_bit(lradc->chan0_map[i].keycode, lradc->input->keybit); > + input_set_drvdata(lradc->input, lradc); > + > + lradc->base = devm_ioremap_resource(dev, > + platform_get_resource(pdev, IORESOURCE_MEM, 0)); > + if (IS_ERR(lradc->base)) > + return PTR_ERR(lradc->base); > + > + ret = devm_request_irq(dev, platform_get_irq(pdev, 0), sun4i_lradc_irq, > + 0, "sun4i-lradc-keys", lradc); > + if (ret) > + return ret; > + > + ret = input_register_device(lradc->input); > + if (ret) > + return ret; > + > + platform_set_drvdata(pdev, lradc); > + return 0; > +} > + > +static const struct of_device_id sun4i_lradc_of_match[] = { > + { .compatible = "allwinner,sun4i-lradc-keys", }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match); > + > +static struct platform_driver sun4i_lradc_driver = { > + .driver = { > + .owner = THIS_MODULE, You can drop the owner field, it's already filled by module_platform_driver. > + .name = "sun4i-lradc-keys", > + .of_match_table = of_match_ptr(sun4i_lradc_of_match), > + }, > + .probe = sun4i_lradc_probe, > +}; > + > +module_platform_driver(sun4i_lradc_driver); > + > +MODULE_DESCRIPTION("Allwinner sun4i low res adc attached tablet keys driver"); > +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); > +MODULE_LICENSE("GPL"); > -- > 2.1.0 > Looking good otherwise, thanks! Maxime
Hi, On 10/21/2014 07:04 PM, Maxime Ripard wrote: > Hi Hans, > > Thanks, a lot for respinning this. > > On Tue, Oct 21, 2014 at 10:24:47AM +0200, Hans de Goede wrote: >> Allwinnner sunxi SoCs have a low resolution adc (called lradc) which is >> specifically designed to have various (tablet) keys (ie home, back, search, >> etc). attached to it using a resistor network. This adds a driver for this. >> >> There are 2 channels, currently this driver only supports chan0 since there >> are no boards known to use chan1. >> >> This has been tested on an olimex a10s-olinuxino-micro, a13-olinuxino, and >> a20-olinuxino-micro. >> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> >> -- >> Changes in v2: >> -Change devicetree bindings to use a per key subnode, like gpio-keys does >> --- >> .../devicetree/bindings/input/sun4i-lradc-keys.txt | 57 +++++ >> MAINTAINERS | 7 + >> drivers/input/keyboard/Kconfig | 10 + >> drivers/input/keyboard/Makefile | 1 + >> drivers/input/keyboard/sun4i-lradc-keys.c | 259 +++++++++++++++++++++ >> 5 files changed, 334 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt >> create mode 100644 drivers/input/keyboard/sun4i-lradc-keys.c >> >> diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt >> new file mode 100644 >> index 0000000..36a141b >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt >> @@ -0,0 +1,57 @@ >> +Allwinner sun4i low res adc attached tablet keys >> +------------------------------------------------ >> + >> +Required properties: >> + - compatible: "allwinner,sun4i-lradc-keys" >> + - reg: mmio address range of the chip >> + - interrupts: interrupt to which the chip is connected >> + - vref-supply: powersupply for the lradc reference voltage >> + >> +Each key is represented as a sub-node of "allwinner,sun4i-lradc-keys": >> + >> +Required subnode-properties: >> + - label: Descriptive name of the key. >> + - linux,code: Keycode to emit. >> + - channel: Channel this key is attached to, mut be 0 or 1. >> + - voltage: Voltage in µV at lradc input when this key is pressed. >> + >> +Example: >> + >> +#include <dt-bindings/input/input.h> >> + >> + lradc: lradc@01c22800 { >> + compatible = "allwinner,sun4i-lradc-keys"; > > You're still using the old pattern for the compatible here, it should > be allwinner,sun4i-a10-lradc-keys. Will fix for the next version. > >> + reg = <0x01c22800 0x100>; >> + interrupts = <31>; >> + vref-supply = <®_vcc3v0>; >> + button@19 { > > I guess the node address in centivolts aren't really that common, > maybe in mV instead? Ack for using mV, will fix for the next version. > >> + label = "Volume Up"; >> + linux,code = <KEY_VOLUMEUP>; >> + channel = <0>; >> + voltage = <191274>; >> + }; > > And a newline between the nodes please. Will fix for the next version. >> + button@39 { >> + label = "Volume Down"; >> + linux,code = <KEY_VOLUMEDOWN>; >> + channel = <0>; >> + voltage = <392644>; >> + }; >> + button@60 { >> + label = "Menu"; >> + linux,code = <KEY_MENU>; >> + channel = <0>; >> + voltage = <601151>; >> + }; >> + button@80 { >> + label = "Enter"; >> + linux,code = <KEY_ENTER>; >> + channel = <0>; >> + voltage = <795090>; >> + }; >> + button@98 { >> + label = "Home"; >> + linux,code = <KEY_HOME>; >> + channel = <0>; >> + voltage = <987387>; >> + }; >> + }; >> diff --git a/MAINTAINERS b/MAINTAINERS >> index a20df9b..73d1aef 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -8932,6 +8932,13 @@ F: arch/m68k/sun3*/ >> F: arch/m68k/include/asm/sun3* >> F: drivers/net/ethernet/i825xx/sun3* >> >> +SUN4I LOW RES ADC ATTACHED TABLET KEYS DRIVER >> +M: Hans de Goede <hdegoede@redhat.com> >> +L: linux-input@vger.kernel.org >> +S: Maintained >> +F: Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt >> +F: drivers/input/keyboard/sun4i-lradc-keys.c >> + >> SUNDANCE NETWORK DRIVER >> M: Denis Kirjanov <kda@linux-powerpc.org> >> L: netdev@vger.kernel.org >> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig >> index a3958c6..2d11b44 100644 >> --- a/drivers/input/keyboard/Kconfig >> +++ b/drivers/input/keyboard/Kconfig >> @@ -567,6 +567,16 @@ config KEYBOARD_STMPE >> To compile this driver as a module, choose M here: the module will be >> called stmpe-keypad. >> >> +config KEYBOARD_SUN4I_LRADC >> + tristate "Allwinner sun4i low res adc attached tablet keys support" >> + depends on ARCH_SUNXI >> + help >> + This selects support for the Allwinner low res adc attached tablet >> + keys found on Allwinner sunxi SoCs. >> + >> + To compile this driver as a module, choose M here: the >> + module will be called sun4i-lradc-keys. >> + >> config KEYBOARD_DAVINCI >> tristate "TI DaVinci Key Scan" >> depends on ARCH_DAVINCI_DM365 >> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile >> index 0a33456..a35269a 100644 >> --- a/drivers/input/keyboard/Makefile >> +++ b/drivers/input/keyboard/Makefile >> @@ -53,6 +53,7 @@ obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o >> obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o >> obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o >> obj-$(CONFIG_KEYBOARD_ST_KEYSCAN) += st-keyscan.o >> +obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o >> obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o >> obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o >> obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o >> diff --git a/drivers/input/keyboard/sun4i-lradc-keys.c b/drivers/input/keyboard/sun4i-lradc-keys.c >> new file mode 100644 >> index 0000000..63a1aff >> --- /dev/null >> +++ b/drivers/input/keyboard/sun4i-lradc-keys.c >> @@ -0,0 +1,259 @@ >> +/* >> + * Allwinner sun4i low res adc attached tablet keys driver >> + * >> + * Copyright (C) 2014 Hans de Goede <hdegoede@redhat.com> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +/* >> + * Allwinnner sunxi SoCs have a lradc which is specifically designed to have >> + * various (tablet) keys (ie home, back, search, etc). attached to it using >> + * a resistor network. This driver is for the keys on such boards. >> + * >> + * There are 2 channels, currently this driver only supports channel 0 since >> + * there are no boards known to use channel 1. >> + */ >> + >> +#include <linux/err.h> >> +#include <linux/init.h> >> +#include <linux/input.h> >> +#include <linux/interrupt.h> >> +#include <linux/io.h> >> +#include <linux/module.h> >> +#include <linux/of_platform.h> >> +#include <linux/platform_device.h> >> +#include <linux/regulator/consumer.h> >> +#include <linux/slab.h> >> + >> +#define LRADC_CTRL 0x00 >> +#define LRADC_INTC 0x04 >> +#define LRADC_INTS 0x08 >> +#define LRADC_DATA0 0x0c >> +#define LRADC_DATA1 0x10 >> + >> +/* LRADC_CTRL bits */ >> +#define FIRST_CONVERT_DLY(x) ((x) << 24) /* 8 bits */ >> +#define CHAN_SELECT(x) ((x) << 22) /* 2 bits */ >> +#define CONTINUE_TIME_SEL(x) ((x) << 16) /* 4 bits */ >> +#define KEY_MODE_SEL(x) ((x) << 12) /* 2 bits */ >> +#define LEVELA_B_CNT(x) ((x) << 8) /* 4 bits */ >> +#define HOLD_EN(x) ((x) << 6) >> +#define LEVELB_VOL(x) ((x) << 4) /* 2 bits */ >> +#define SAMPLE_RATE(x) ((x) << 2) /* 2 bits */ >> +#define ENABLE(x) ((x) << 0) >> + >> +/* LRADC_INTC and LRADC_INTS bits */ >> +#define CHAN1_KEYUP_IRQ BIT(12) >> +#define CHAN1_ALRDY_HOLD_IRQ BIT(11) >> +#define CHAN1_HOLD_IRQ BIT(10) >> +#define CHAN1_KEYDOWN_IRQ BIT(9) >> +#define CHAN1_DATA_IRQ BIT(8) >> +#define CHAN0_KEYUP_IRQ BIT(4) >> +#define CHAN0_ALRDY_HOLD_IRQ BIT(3) >> +#define CHAN0_HOLD_IRQ BIT(2) >> +#define CHAN0_KEYDOWN_IRQ BIT(1) >> +#define CHAN0_DATA_IRQ BIT(0) >> + >> +struct sun4i_lradc_keymap { >> + u32 voltage; >> + u32 keycode; >> +}; >> + >> +struct sun4i_lradc_data { >> + struct device *dev; >> + struct input_dev *input; >> + void __iomem *base; >> + struct regulator *vref_supply; >> + struct sun4i_lradc_keymap *chan0_map; >> + u32 chan0_map_count; >> + u32 chan0_keycode; >> + u32 vref; >> +}; >> + >> +static irqreturn_t sun4i_lradc_irq(int irq, void *dev_id) >> +{ >> + struct sun4i_lradc_data *lradc = dev_id; >> + u32 i, ints, val, voltage, diff, keycode = 0, closest = 0xffffffff; >> + >> + ints = readl(lradc->base + LRADC_INTS); >> + >> + /* >> + * lradc supports only one keypress at a time, release does not give >> + * any info as to which key was released, so we cache the keycode. >> + */ >> + if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) { >> + val = readl(lradc->base + LRADC_DATA0) & 0x3f; >> + voltage = val * lradc->vref / 63; >> + >> + for (i = 0; i < lradc->chan0_map_count; i++) { >> + diff = abs(lradc->chan0_map[i].voltage - voltage); >> + if (diff < closest) { >> + closest = diff; >> + keycode = lradc->chan0_map[i].keycode; >> + } >> + } >> + >> + lradc->chan0_keycode = keycode; >> + input_report_key(lradc->input, lradc->chan0_keycode, 1); >> + } >> + >> + if (ints & CHAN0_KEYUP_IRQ) { >> + input_report_key(lradc->input, lradc->chan0_keycode, 0); >> + lradc->chan0_keycode = 0; >> + } >> + >> + input_sync(lradc->input); >> + >> + writel(ints, lradc->base + LRADC_INTS); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static int sun4i_lradc_open(struct input_dev *dev) >> +{ >> + struct sun4i_lradc_data *lradc = input_get_drvdata(dev); >> + int ret; >> + >> + ret = regulator_enable(lradc->vref_supply); >> + if (ret) >> + return ret; >> + >> + /* lradc Vref internally is divided by 2/3 */ >> + lradc->vref = regulator_get_voltage(lradc->vref_supply) * 2 / 3; >> + >> + /* >> + * Set sample time to 4 ms / 250 Hz. Wait 2 * 4 ms for key to >> + * stabilize on press, wait (1 + 1) * 4 ms for key release >> + */ >> + writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | >> + SAMPLE_RATE(0) | ENABLE(1), lradc->base + LRADC_CTRL); >> + >> + writel(CHAN0_KEYUP_IRQ | CHAN0_KEYDOWN_IRQ, lradc->base + LRADC_INTC); >> + >> + return 0; >> +} >> + >> +static void sun4i_lradc_close(struct input_dev *dev) >> +{ >> + struct sun4i_lradc_data *lradc = input_get_drvdata(dev); >> + >> + /* Disable lradc, leave other settings unchanged */ >> + writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | >> + SAMPLE_RATE(2), lradc->base + LRADC_CTRL); >> + writel(0, lradc->base + LRADC_INTC); >> + >> + regulator_disable(lradc->vref_supply); >> +} >> + >> +static int sun4i_lradc_probe(struct platform_device *pdev) >> +{ >> + struct sun4i_lradc_data *lradc; >> + struct device *dev = &pdev->dev; >> + struct device_node *pp, *np = dev->of_node; >> + u32 channel; >> + int i, ret; >> + >> + lradc = devm_kzalloc(dev, sizeof(struct sun4i_lradc_data), GFP_KERNEL); >> + if (!lradc) >> + return -ENOMEM; >> + >> + lradc->chan0_map_count = of_get_child_count(np); >> + lradc->chan0_map = devm_kmalloc(dev, lradc->chan0_map_count * >> + sizeof(struct sun4i_lradc_keymap), GFP_KERNEL); >> + if (!lradc->chan0_map) >> + return -ENOMEM; >> + >> + i = 0; >> + for_each_child_of_node(np, pp) { >> + struct sun4i_lradc_keymap *map = &lradc->chan0_map[i]; >> + >> + ret = of_property_read_u32(pp, "channel", &channel); >> + if (ret || channel != 0) { >> + dev_err(dev, "%s: Inval channel prop\n", pp->name); >> + return -EINVAL; >> + } >> + >> + ret = of_property_read_u32(pp, "voltage", &map->voltage); >> + if (ret) { >> + dev_err(dev, "%s: Inval voltage prop\n", pp->name); >> + return -EINVAL; >> + } >> + >> + ret = of_property_read_u32(pp, "linux,code", &map->keycode); >> + if (ret) { >> + dev_err(dev, "%s: Inval linux,code prop\n", pp->name); >> + return -EINVAL; >> + } >> + >> + i++; >> + } >> + >> + lradc->vref_supply = devm_regulator_get(dev, "vref"); >> + if (IS_ERR(lradc->vref_supply)) >> + return PTR_ERR(lradc->vref_supply); >> + >> + lradc->dev = dev; >> + lradc->input = devm_input_allocate_device(dev); >> + if (!lradc->input) >> + return -ENOMEM; >> + >> + lradc->input->name = pdev->name; >> + lradc->input->phys = "sun4i_lradc/input0"; >> + lradc->input->open = sun4i_lradc_open; >> + lradc->input->close = sun4i_lradc_close; >> + lradc->input->id.bustype = BUS_HOST; >> + lradc->input->id.vendor = 0x0001; >> + lradc->input->id.product = 0x0001; >> + lradc->input->id.version = 0x0100; >> + lradc->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY); >> + for (i = 0; i < lradc->chan0_map_count; i++) >> + set_bit(lradc->chan0_map[i].keycode, lradc->input->keybit); >> + input_set_drvdata(lradc->input, lradc); >> + >> + lradc->base = devm_ioremap_resource(dev, >> + platform_get_resource(pdev, IORESOURCE_MEM, 0)); >> + if (IS_ERR(lradc->base)) >> + return PTR_ERR(lradc->base); >> + >> + ret = devm_request_irq(dev, platform_get_irq(pdev, 0), sun4i_lradc_irq, >> + 0, "sun4i-lradc-keys", lradc); >> + if (ret) >> + return ret; >> + >> + ret = input_register_device(lradc->input); >> + if (ret) >> + return ret; >> + >> + platform_set_drvdata(pdev, lradc); >> + return 0; >> +} >> + >> +static const struct of_device_id sun4i_lradc_of_match[] = { >> + { .compatible = "allwinner,sun4i-lradc-keys", }, >> + { /* sentinel */ } >> +}; >> +MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match); >> + >> +static struct platform_driver sun4i_lradc_driver = { >> + .driver = { >> + .owner = THIS_MODULE, > > You can drop the owner field, it's already filled by > module_platform_driver. Will fix for the next version. > >> + .name = "sun4i-lradc-keys", >> + .of_match_table = of_match_ptr(sun4i_lradc_of_match), >> + }, >> + .probe = sun4i_lradc_probe, >> +}; >> + >> +module_platform_driver(sun4i_lradc_driver); >> + >> +MODULE_DESCRIPTION("Allwinner sun4i low res adc attached tablet keys driver"); >> +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); >> +MODULE_LICENSE("GPL"); >> -- >> 2.1.0 >> > > Looking good otherwise, thanks! Thanks for the review. Regards, Hans
diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt new file mode 100644 index 0000000..36a141b --- /dev/null +++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt @@ -0,0 +1,57 @@ +Allwinner sun4i low res adc attached tablet keys +------------------------------------------------ + +Required properties: + - compatible: "allwinner,sun4i-lradc-keys" + - reg: mmio address range of the chip + - interrupts: interrupt to which the chip is connected + - vref-supply: powersupply for the lradc reference voltage + +Each key is represented as a sub-node of "allwinner,sun4i-lradc-keys": + +Required subnode-properties: + - label: Descriptive name of the key. + - linux,code: Keycode to emit. + - channel: Channel this key is attached to, mut be 0 or 1. + - voltage: Voltage in µV at lradc input when this key is pressed. + +Example: + +#include <dt-bindings/input/input.h> + + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + vref-supply = <®_vcc3v0>; + button@19 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; + button@39 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; + button@60 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; + button@80 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <795090>; + }; + button@98 { + label = "Home"; + linux,code = <KEY_HOME>; + channel = <0>; + voltage = <987387>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index a20df9b..73d1aef 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8932,6 +8932,13 @@ F: arch/m68k/sun3*/ F: arch/m68k/include/asm/sun3* F: drivers/net/ethernet/i825xx/sun3* +SUN4I LOW RES ADC ATTACHED TABLET KEYS DRIVER +M: Hans de Goede <hdegoede@redhat.com> +L: linux-input@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt +F: drivers/input/keyboard/sun4i-lradc-keys.c + SUNDANCE NETWORK DRIVER M: Denis Kirjanov <kda@linux-powerpc.org> L: netdev@vger.kernel.org diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index a3958c6..2d11b44 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -567,6 +567,16 @@ config KEYBOARD_STMPE To compile this driver as a module, choose M here: the module will be called stmpe-keypad. +config KEYBOARD_SUN4I_LRADC + tristate "Allwinner sun4i low res adc attached tablet keys support" + depends on ARCH_SUNXI + help + This selects support for the Allwinner low res adc attached tablet + keys found on Allwinner sunxi SoCs. + + To compile this driver as a module, choose M here: the + module will be called sun4i-lradc-keys. + config KEYBOARD_DAVINCI tristate "TI DaVinci Key Scan" depends on ARCH_DAVINCI_DM365 diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 0a33456..a35269a 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_ST_KEYSCAN) += st-keyscan.o +obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o diff --git a/drivers/input/keyboard/sun4i-lradc-keys.c b/drivers/input/keyboard/sun4i-lradc-keys.c new file mode 100644 index 0000000..63a1aff --- /dev/null +++ b/drivers/input/keyboard/sun4i-lradc-keys.c @@ -0,0 +1,259 @@ +/* + * Allwinner sun4i low res adc attached tablet keys driver + * + * Copyright (C) 2014 Hans de Goede <hdegoede@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Allwinnner sunxi SoCs have a lradc which is specifically designed to have + * various (tablet) keys (ie home, back, search, etc). attached to it using + * a resistor network. This driver is for the keys on such boards. + * + * There are 2 channels, currently this driver only supports channel 0 since + * there are no boards known to use channel 1. + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#define LRADC_CTRL 0x00 +#define LRADC_INTC 0x04 +#define LRADC_INTS 0x08 +#define LRADC_DATA0 0x0c +#define LRADC_DATA1 0x10 + +/* LRADC_CTRL bits */ +#define FIRST_CONVERT_DLY(x) ((x) << 24) /* 8 bits */ +#define CHAN_SELECT(x) ((x) << 22) /* 2 bits */ +#define CONTINUE_TIME_SEL(x) ((x) << 16) /* 4 bits */ +#define KEY_MODE_SEL(x) ((x) << 12) /* 2 bits */ +#define LEVELA_B_CNT(x) ((x) << 8) /* 4 bits */ +#define HOLD_EN(x) ((x) << 6) +#define LEVELB_VOL(x) ((x) << 4) /* 2 bits */ +#define SAMPLE_RATE(x) ((x) << 2) /* 2 bits */ +#define ENABLE(x) ((x) << 0) + +/* LRADC_INTC and LRADC_INTS bits */ +#define CHAN1_KEYUP_IRQ BIT(12) +#define CHAN1_ALRDY_HOLD_IRQ BIT(11) +#define CHAN1_HOLD_IRQ BIT(10) +#define CHAN1_KEYDOWN_IRQ BIT(9) +#define CHAN1_DATA_IRQ BIT(8) +#define CHAN0_KEYUP_IRQ BIT(4) +#define CHAN0_ALRDY_HOLD_IRQ BIT(3) +#define CHAN0_HOLD_IRQ BIT(2) +#define CHAN0_KEYDOWN_IRQ BIT(1) +#define CHAN0_DATA_IRQ BIT(0) + +struct sun4i_lradc_keymap { + u32 voltage; + u32 keycode; +}; + +struct sun4i_lradc_data { + struct device *dev; + struct input_dev *input; + void __iomem *base; + struct regulator *vref_supply; + struct sun4i_lradc_keymap *chan0_map; + u32 chan0_map_count; + u32 chan0_keycode; + u32 vref; +}; + +static irqreturn_t sun4i_lradc_irq(int irq, void *dev_id) +{ + struct sun4i_lradc_data *lradc = dev_id; + u32 i, ints, val, voltage, diff, keycode = 0, closest = 0xffffffff; + + ints = readl(lradc->base + LRADC_INTS); + + /* + * lradc supports only one keypress at a time, release does not give + * any info as to which key was released, so we cache the keycode. + */ + if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) { + val = readl(lradc->base + LRADC_DATA0) & 0x3f; + voltage = val * lradc->vref / 63; + + for (i = 0; i < lradc->chan0_map_count; i++) { + diff = abs(lradc->chan0_map[i].voltage - voltage); + if (diff < closest) { + closest = diff; + keycode = lradc->chan0_map[i].keycode; + } + } + + lradc->chan0_keycode = keycode; + input_report_key(lradc->input, lradc->chan0_keycode, 1); + } + + if (ints & CHAN0_KEYUP_IRQ) { + input_report_key(lradc->input, lradc->chan0_keycode, 0); + lradc->chan0_keycode = 0; + } + + input_sync(lradc->input); + + writel(ints, lradc->base + LRADC_INTS); + + return IRQ_HANDLED; +} + +static int sun4i_lradc_open(struct input_dev *dev) +{ + struct sun4i_lradc_data *lradc = input_get_drvdata(dev); + int ret; + + ret = regulator_enable(lradc->vref_supply); + if (ret) + return ret; + + /* lradc Vref internally is divided by 2/3 */ + lradc->vref = regulator_get_voltage(lradc->vref_supply) * 2 / 3; + + /* + * Set sample time to 4 ms / 250 Hz. Wait 2 * 4 ms for key to + * stabilize on press, wait (1 + 1) * 4 ms for key release + */ + writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | + SAMPLE_RATE(0) | ENABLE(1), lradc->base + LRADC_CTRL); + + writel(CHAN0_KEYUP_IRQ | CHAN0_KEYDOWN_IRQ, lradc->base + LRADC_INTC); + + return 0; +} + +static void sun4i_lradc_close(struct input_dev *dev) +{ + struct sun4i_lradc_data *lradc = input_get_drvdata(dev); + + /* Disable lradc, leave other settings unchanged */ + writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | + SAMPLE_RATE(2), lradc->base + LRADC_CTRL); + writel(0, lradc->base + LRADC_INTC); + + regulator_disable(lradc->vref_supply); +} + +static int sun4i_lradc_probe(struct platform_device *pdev) +{ + struct sun4i_lradc_data *lradc; + struct device *dev = &pdev->dev; + struct device_node *pp, *np = dev->of_node; + u32 channel; + int i, ret; + + lradc = devm_kzalloc(dev, sizeof(struct sun4i_lradc_data), GFP_KERNEL); + if (!lradc) + return -ENOMEM; + + lradc->chan0_map_count = of_get_child_count(np); + lradc->chan0_map = devm_kmalloc(dev, lradc->chan0_map_count * + sizeof(struct sun4i_lradc_keymap), GFP_KERNEL); + if (!lradc->chan0_map) + return -ENOMEM; + + i = 0; + for_each_child_of_node(np, pp) { + struct sun4i_lradc_keymap *map = &lradc->chan0_map[i]; + + ret = of_property_read_u32(pp, "channel", &channel); + if (ret || channel != 0) { + dev_err(dev, "%s: Inval channel prop\n", pp->name); + return -EINVAL; + } + + ret = of_property_read_u32(pp, "voltage", &map->voltage); + if (ret) { + dev_err(dev, "%s: Inval voltage prop\n", pp->name); + return -EINVAL; + } + + ret = of_property_read_u32(pp, "linux,code", &map->keycode); + if (ret) { + dev_err(dev, "%s: Inval linux,code prop\n", pp->name); + return -EINVAL; + } + + i++; + } + + lradc->vref_supply = devm_regulator_get(dev, "vref"); + if (IS_ERR(lradc->vref_supply)) + return PTR_ERR(lradc->vref_supply); + + lradc->dev = dev; + lradc->input = devm_input_allocate_device(dev); + if (!lradc->input) + return -ENOMEM; + + lradc->input->name = pdev->name; + lradc->input->phys = "sun4i_lradc/input0"; + lradc->input->open = sun4i_lradc_open; + lradc->input->close = sun4i_lradc_close; + lradc->input->id.bustype = BUS_HOST; + lradc->input->id.vendor = 0x0001; + lradc->input->id.product = 0x0001; + lradc->input->id.version = 0x0100; + lradc->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY); + for (i = 0; i < lradc->chan0_map_count; i++) + set_bit(lradc->chan0_map[i].keycode, lradc->input->keybit); + input_set_drvdata(lradc->input, lradc); + + lradc->base = devm_ioremap_resource(dev, + platform_get_resource(pdev, IORESOURCE_MEM, 0)); + if (IS_ERR(lradc->base)) + return PTR_ERR(lradc->base); + + ret = devm_request_irq(dev, platform_get_irq(pdev, 0), sun4i_lradc_irq, + 0, "sun4i-lradc-keys", lradc); + if (ret) + return ret; + + ret = input_register_device(lradc->input); + if (ret) + return ret; + + platform_set_drvdata(pdev, lradc); + return 0; +} + +static const struct of_device_id sun4i_lradc_of_match[] = { + { .compatible = "allwinner,sun4i-lradc-keys", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match); + +static struct platform_driver sun4i_lradc_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "sun4i-lradc-keys", + .of_match_table = of_match_ptr(sun4i_lradc_of_match), + }, + .probe = sun4i_lradc_probe, +}; + +module_platform_driver(sun4i_lradc_driver); + +MODULE_DESCRIPTION("Allwinner sun4i low res adc attached tablet keys driver"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL");
Allwinnner sunxi SoCs have a low resolution adc (called lradc) which is specifically designed to have various (tablet) keys (ie home, back, search, etc). attached to it using a resistor network. This adds a driver for this. There are 2 channels, currently this driver only supports chan0 since there are no boards known to use chan1. This has been tested on an olimex a10s-olinuxino-micro, a13-olinuxino, and a20-olinuxino-micro. Signed-off-by: Hans de Goede <hdegoede@redhat.com> -- Changes in v2: -Change devicetree bindings to use a per key subnode, like gpio-keys does --- .../devicetree/bindings/input/sun4i-lradc-keys.txt | 57 +++++ MAINTAINERS | 7 + drivers/input/keyboard/Kconfig | 10 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/sun4i-lradc-keys.c | 259 +++++++++++++++++++++ 5 files changed, 334 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt create mode 100644 drivers/input/keyboard/sun4i-lradc-keys.c