Message ID | 1412665917-29731-2-git-send-email-wens@csie.org |
---|---|
State | Superseded |
Headers | show |
On Tue, 2014-10-07 at 15:11 +0800, Chen-Yu Tsai wrote: > BOOT_TARGET_DEVICES includes MMC unconditionally. This breaks when > CONFIG_CMD_MMC is not defined. Use a secondary macro to conditionally > include it when CONFIG_MMC is enabled, as we do for CONFIG_AHCI. > > This is used when we want to use uart0 from port F, which conflicts > with mmc0. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Ian Campbell <ijc@hellion.org.uk> Hans, this made me think back to your " Enable second sdcard slot found on some boards" series -- do you not want to add mmc1 as a boot target device when MMC_SUNXI_SLOT_EXTRA is enabled? > --- > include/configs/sunxi-common.h | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h > index a31656e..7571e0e 100644 > --- a/include/configs/sunxi-common.h > +++ b/include/configs/sunxi-common.h > @@ -227,6 +227,12 @@ > "pxefile_addr_r=0x43200000\0" \ > "ramdisk_addr_r=0x43300000\0" > > +#ifdef CONFIG_MMC > +#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) > +#else > +#define BOOT_TARGET_DEVICES_MMC(func) > +#endif > + > #ifdef CONFIG_AHCI > #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) > #else > @@ -240,7 +246,7 @@ > #endif > > #define BOOT_TARGET_DEVICES(func) \ > - func(MMC, mmc, 0) \ > + BOOT_TARGET_DEVICES_MMC(func) \ > BOOT_TARGET_DEVICES_SCSI(func) \ > BOOT_TARGET_DEVICES_USB(func) \ > func(PXE, pxe, na) \
Hi, On 10/11/2014 05:50 PM, Ian Campbell wrote: > On Tue, 2014-10-07 at 15:11 +0800, Chen-Yu Tsai wrote: >> BOOT_TARGET_DEVICES includes MMC unconditionally. This breaks when >> CONFIG_CMD_MMC is not defined. Use a secondary macro to conditionally >> include it when CONFIG_MMC is enabled, as we do for CONFIG_AHCI. >> >> This is used when we want to use uart0 from port F, which conflicts >> with mmc0. >> >> Signed-off-by: Chen-Yu Tsai <wens@csie.org> > > Acked-by: Ian Campbell <ijc@hellion.org.uk> > > Hans, this made me think back to your " Enable second sdcard slot found > on some boards" series -- do you not want to add mmc1 as a boot target > device when MMC_SUNXI_SLOT_EXTRA is enabled? An interesting question. u-boot itself is always running of mmc 0, or loaded through FEL, but that does not mean that e.g. extlinux.conf + the kernel and dts could not be on mmc 1. So yes I guess we do want to add mmc 1 as boot target. First lets get Chen's patches + my existing second mmc slot set merged into u-boot-sunxi next, and then I'll do a patch on top of that. Regards, Hans > >> --- >> include/configs/sunxi-common.h | 8 +++++++- >> 1 file changed, 7 insertions(+), 1 deletion(-) >> >> diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h >> index a31656e..7571e0e 100644 >> --- a/include/configs/sunxi-common.h >> +++ b/include/configs/sunxi-common.h >> @@ -227,6 +227,12 @@ >> "pxefile_addr_r=0x43200000\0" \ >> "ramdisk_addr_r=0x43300000\0" >> >> +#ifdef CONFIG_MMC >> +#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) >> +#else >> +#define BOOT_TARGET_DEVICES_MMC(func) >> +#endif >> + >> #ifdef CONFIG_AHCI >> #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) >> #else >> @@ -240,7 +246,7 @@ >> #endif >> >> #define BOOT_TARGET_DEVICES(func) \ >> - func(MMC, mmc, 0) \ >> + BOOT_TARGET_DEVICES_MMC(func) \ >> BOOT_TARGET_DEVICES_SCSI(func) \ >> BOOT_TARGET_DEVICES_USB(func) \ >> func(PXE, pxe, na) \ > >
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index a31656e..7571e0e 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -227,6 +227,12 @@ "pxefile_addr_r=0x43200000\0" \ "ramdisk_addr_r=0x43300000\0" +#ifdef CONFIG_MMC +#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) +#else +#define BOOT_TARGET_DEVICES_MMC(func) +#endif + #ifdef CONFIG_AHCI #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) #else @@ -240,7 +246,7 @@ #endif #define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ + BOOT_TARGET_DEVICES_MMC(func) \ BOOT_TARGET_DEVICES_SCSI(func) \ BOOT_TARGET_DEVICES_USB(func) \ func(PXE, pxe, na) \
BOOT_TARGET_DEVICES includes MMC unconditionally. This breaks when CONFIG_CMD_MMC is not defined. Use a secondary macro to conditionally include it when CONFIG_MMC is enabled, as we do for CONFIG_AHCI. This is used when we want to use uart0 from port F, which conflicts with mmc0. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- include/configs/sunxi-common.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)