Message ID | 1410429592-10456-1-git-send-email-guillaume.gardet@free.fr |
---|---|
State | Awaiting Upstream |
Delegated to: | Stefano Babic |
Headers | show |
Hi Guillaume, On 09/11/2014 02:59 AM, Guillaume GARDET wrote: > Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top) slot. > This patch makes use of both slots instead of only one. > > Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> > Cc: Stefano Babic <sbabic@denx.de> > Cc: Eric Nelson <eric.nelson@boundarydevices.com> > > --- > include/configs/nitrogen6x.h | 25 ++++++++++++++----------- > 1 file changed, 14 insertions(+), 11 deletions(-) > > diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h > index d4b0ac9..2a1eb3b 100644 > --- a/include/configs/nitrogen6x.h > +++ b/include/configs/nitrogen6x.h > @@ -186,7 +186,7 @@ > "fdt_addr=0x18000000\0" \ > "boot_fdt=try\0" \ > "ip_dyn=yes\0" \ > - "mmcdev=0\0" \ > + "mmcdevs=0 1\0" \ > "mmcpart=1\0" \ > "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ > "mmcargs=setenv bootargs console=${console},${baudrate} " \ > @@ -238,16 +238,19 @@ > "fi;\0" > > #define CONFIG_BOOTCOMMAND \ > - "mmc dev ${mmcdev}; if mmc rescan; then " \ > - "if run loadbootscript; then " \ > - "run bootscript; " \ > - "else " \ > - "if run loaduimage; then " \ > - "run mmcboot; " \ > - "else run netboot; " \ > - "fi; " \ > - "fi; " \ > - "else run netboot; fi" If you add one more loop here, you'll end up with something very close to the Nitrogen6x configuration! > + "for mmcdev in ${mmcdevs}; do " \ > + "mmc dev ${mmcdev}; " \ > + "if mmc rescan; then " \ > + "if run loadbootscript; then " \ > + "run bootscript; " \ > + "else " \ > + "if run loaduimage; then " \ > + "run mmcboot; " \ > + "fi; " \ > + "fi; " \ > + "fi; " \ > + "done; " \ > + "run netboot; " > #else > #define CONFIG_EXTRA_ENV_SETTINGS \ > "console=ttymxc1\0" \ > Reviewed-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
Hi Guillaume, On 09/11/2014 02:59 AM, Guillaume GARDET wrote: > Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top) slot. > This patch makes use of both slots instead of only one. > > Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> > Cc: Stefano Babic <sbabic@denx.de> > Cc: Eric Nelson <eric.nelson@boundarydevices.com> > > --- > include/configs/nitrogen6x.h | 25 ++++++++++++++----------- > 1 file changed, 14 insertions(+), 11 deletions(-) > > diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h > index d4b0ac9..2a1eb3b 100644 > --- a/include/configs/nitrogen6x.h > +++ b/include/configs/nitrogen6x.h > @@ -186,7 +186,7 @@ > "fdt_addr=0x18000000\0" \ > "boot_fdt=try\0" \ > "ip_dyn=yes\0" \ > - "mmcdev=0\0" \ > + "mmcdevs=0 1\0" \ > "mmcpart=1\0" \ > "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ > "mmcargs=setenv bootargs console=${console},${baudrate} " \ > @@ -238,16 +238,19 @@ > "fi;\0" > > #define CONFIG_BOOTCOMMAND \ > - "mmc dev ${mmcdev}; if mmc rescan; then " \ > - "if run loadbootscript; then " \ > - "run bootscript; " \ > - "else " \ > - "if run loaduimage; then " \ > - "run mmcboot; " \ > - "else run netboot; " \ > - "fi; " \ > - "fi; " \ > - "else run netboot; fi" If you add one more loop here, you can get SATA support and end up with something very close to the Nitrogen6x configuration! > + "for mmcdev in ${mmcdevs}; do " \ > + "mmc dev ${mmcdev}; " \ > + "if mmc rescan; then " \ > + "if run loadbootscript; then " \ > + "run bootscript; " \ > + "else " \ > + "if run loaduimage; then " \ > + "run mmcboot; " \ > + "fi; " \ > + "fi; " \ > + "fi; " \ > + "done; " \ > + "run netboot; " > #else > #define CONFIG_EXTRA_ENV_SETTINGS \ > "console=ttymxc1\0" \ > Reviewed-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
On 11/09/2014 11:59, Guillaume GARDET wrote: > Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top) slot. > This patch makes use of both slots instead of only one. > > Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> > Cc: Stefano Babic <sbabic@denx.de> > Cc: Eric Nelson <eric.nelson@boundarydevices.com> > > --- Applied to u-boot-imx, thanks ! Best regards, Stefano Babic
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index d4b0ac9..2a1eb3b 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -186,7 +186,7 @@ "fdt_addr=0x18000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ - "mmcdev=0\0" \ + "mmcdevs=0 1\0" \ "mmcpart=1\0" \ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -238,16 +238,19 @@ "fi;\0" #define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" + "for mmcdev in ${mmcdevs}; do " \ + "mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "fi; " \ + "fi; " \ + "fi; " \ + "done; " \ + "run netboot; " #else #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc1\0" \
Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top) slot. This patch makes use of both slots instead of only one. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Stefano Babic <sbabic@denx.de> Cc: Eric Nelson <eric.nelson@boundarydevices.com> --- include/configs/nitrogen6x.h | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)