Message ID | 1392819174-11634-11-git-send-email-andrew@lunn.ch |
---|---|
State | Accepted, archived |
Commit | 4b8f7a11c9fb680895e5079788653a59d6bdde16 |
Headers | show |
+ rmk Russell, This patch (and two others after it) are necessary for the migration of the kirkwood DT board code to mach-mvebu/. Due to the complexity of the move, (concurrent with adding three new SoCs to mach-mvebu), could you please review these and provide Acks for us to take them through arm-soc? thx, Jason. On Wed, Feb 19, 2014 at 03:12:41PM +0100, Andrew Lunn wrote: > Instantiate the L2 cache from DT. Indicate in DT where the cache > control register is so that it is possible to enable/disable write > through on the CPU. > > Signed-off-by: Andrew Lunn <andrew@lunn.ch> > cc: devicetree@vger.kernel.org > --- > v2: > Change compatible strings to follow l2x0 convention > Only expect register for kirkwood-cache. > Default to write through if no DT node. > Rename writethrough to wt-override to follow l2cc binding. > Split kirkwood.dtsi change into a patch of its own. > v3 > Remove wt-override from the binding > Respect CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH > --- > .../devicetree/bindings/arm/mrvl/feroceon.txt | 16 ++++++++ > arch/arm/include/asm/hardware/cache-feroceon-l2.h | 2 + > arch/arm/mach-kirkwood/board-dt.c | 18 ++------- > arch/arm/mm/cache-feroceon-l2.c | 43 ++++++++++++++++++++++ > 4 files changed, 64 insertions(+), 15 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/mrvl/feroceon.txt > > diff --git a/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt > new file mode 100644 > index 000000000000..0d244b999d10 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt > @@ -0,0 +1,16 @@ > +* Marvell Feroceon Cache > + > +Required properties: > +- compatible : Should be either "marvell,feroceon-cache" or > + "marvell,kirkwood-cache". > + > +Optional properties: > +- reg : Address of the L2 cache control register. Mandatory for > + "marvell,kirkwood-cache", not used by "marvell,feroceon-cache" > + > + > +Example: > + l2: l2-cache@20128 { > + compatible = "marvell,kirkwood-cache"; > + reg = <0x20128 0x4>; > + }; > diff --git a/arch/arm/include/asm/hardware/cache-feroceon-l2.h b/arch/arm/include/asm/hardware/cache-feroceon-l2.h > index 8edd330aabf6..12e1588dc4f1 100644 > --- a/arch/arm/include/asm/hardware/cache-feroceon-l2.h > +++ b/arch/arm/include/asm/hardware/cache-feroceon-l2.h > @@ -9,3 +9,5 @@ > */ > > extern void __init feroceon_l2_init(int l2_wt_override); > +extern int __init feroceon_of_init(void); > + > diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c > index 29c246858d5a..ec0702c02d6c 100644 > --- a/arch/arm/mach-kirkwood/board-dt.c > +++ b/arch/arm/mach-kirkwood/board-dt.c > @@ -42,19 +42,6 @@ static void __init kirkwood_map_io(void) > iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); > } > > -static void __init kirkwood_l2_init(void) > -{ > -#ifdef CONFIG_CACHE_FEROCEON_L2 > -#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH > - writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG); > - feroceon_l2_init(1); > -#else > - writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG); > - feroceon_l2_init(0); > -#endif > -#endif > -} > - > static struct resource kirkwood_cpufreq_resources[] = { > [0] = { > .start = CPU_CONTROL_PHYS, > @@ -211,8 +198,9 @@ static void __init kirkwood_dt_init(void) > > BUG_ON(mvebu_mbus_dt_init()); > > - kirkwood_l2_init(); > - > +#ifdef CONFIG_CACHE_FEROCEON_L2 > + feroceon_of_init(); > +#endif > kirkwood_cpufreq_init(); > kirkwood_cpuidle_init(); > > diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c > index 898362e7972b..8dc1a2b5a8ed 100644 > --- a/arch/arm/mm/cache-feroceon-l2.c > +++ b/arch/arm/mm/cache-feroceon-l2.c > @@ -13,11 +13,16 @@ > */ > > #include <linux/init.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > #include <linux/highmem.h> > +#include <linux/io.h> > #include <asm/cacheflush.h> > #include <asm/cp15.h> > #include <asm/hardware/cache-feroceon-l2.h> > > +#define L2_WRITETHROUGH_KIRKWOOD BIT(4) > + > /* > * Low-level cache maintenance operations. > * > @@ -350,3 +355,41 @@ void __init feroceon_l2_init(int __l2_wt_override) > printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n", > l2_wt_override ? ", in WT override mode" : ""); > } > +#ifdef CONFIG_OF > +static const struct of_device_id feroceon_ids[] __initconst = { > + { .compatible = "marvell,kirkwood-cache"}, > + { .compatible = "marvell,feroceon-cache"}, > + {} > +}; > + > +int __init feroceon_of_init(void) > +{ > + struct device_node *node; > + void __iomem *base; > + bool l2_wt_override = false; > + struct resource res; > + > +#if defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH) > + l2_wt_override = true; > +#endif > + > + node = of_find_matching_node(NULL, feroceon_ids); > + if (node && of_device_is_compatible(node, "marvell,kirkwood-cache")) { > + if (of_address_to_resource(node, 0, &res)) > + return -ENODEV; > + > + base = ioremap(res.start, resource_size(&res)); > + if (!base) > + return -ENOMEM; > + > + if (l2_wt_override) > + writel(readl(base) | L2_WRITETHROUGH_KIRKWOOD, base); > + else > + writel(readl(base) & ~L2_WRITETHROUGH_KIRKWOOD, base); > + } > + > + feroceon_l2_init(l2_wt_override); > + > + return 0; > +} > +#endif > -- > 1.8.5.3 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt new file mode 100644 index 000000000000..0d244b999d10 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt @@ -0,0 +1,16 @@ +* Marvell Feroceon Cache + +Required properties: +- compatible : Should be either "marvell,feroceon-cache" or + "marvell,kirkwood-cache". + +Optional properties: +- reg : Address of the L2 cache control register. Mandatory for + "marvell,kirkwood-cache", not used by "marvell,feroceon-cache" + + +Example: + l2: l2-cache@20128 { + compatible = "marvell,kirkwood-cache"; + reg = <0x20128 0x4>; + }; diff --git a/arch/arm/include/asm/hardware/cache-feroceon-l2.h b/arch/arm/include/asm/hardware/cache-feroceon-l2.h index 8edd330aabf6..12e1588dc4f1 100644 --- a/arch/arm/include/asm/hardware/cache-feroceon-l2.h +++ b/arch/arm/include/asm/hardware/cache-feroceon-l2.h @@ -9,3 +9,5 @@ */ extern void __init feroceon_l2_init(int l2_wt_override); +extern int __init feroceon_of_init(void); + diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 29c246858d5a..ec0702c02d6c 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -42,19 +42,6 @@ static void __init kirkwood_map_io(void) iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc)); } -static void __init kirkwood_l2_init(void) -{ -#ifdef CONFIG_CACHE_FEROCEON_L2 -#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH - writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG); - feroceon_l2_init(1); -#else - writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG); - feroceon_l2_init(0); -#endif -#endif -} - static struct resource kirkwood_cpufreq_resources[] = { [0] = { .start = CPU_CONTROL_PHYS, @@ -211,8 +198,9 @@ static void __init kirkwood_dt_init(void) BUG_ON(mvebu_mbus_dt_init()); - kirkwood_l2_init(); - +#ifdef CONFIG_CACHE_FEROCEON_L2 + feroceon_of_init(); +#endif kirkwood_cpufreq_init(); kirkwood_cpuidle_init(); diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index 898362e7972b..8dc1a2b5a8ed 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -13,11 +13,16 @@ */ #include <linux/init.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <linux/highmem.h> +#include <linux/io.h> #include <asm/cacheflush.h> #include <asm/cp15.h> #include <asm/hardware/cache-feroceon-l2.h> +#define L2_WRITETHROUGH_KIRKWOOD BIT(4) + /* * Low-level cache maintenance operations. * @@ -350,3 +355,41 @@ void __init feroceon_l2_init(int __l2_wt_override) printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n", l2_wt_override ? ", in WT override mode" : ""); } +#ifdef CONFIG_OF +static const struct of_device_id feroceon_ids[] __initconst = { + { .compatible = "marvell,kirkwood-cache"}, + { .compatible = "marvell,feroceon-cache"}, + {} +}; + +int __init feroceon_of_init(void) +{ + struct device_node *node; + void __iomem *base; + bool l2_wt_override = false; + struct resource res; + +#if defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH) + l2_wt_override = true; +#endif + + node = of_find_matching_node(NULL, feroceon_ids); + if (node && of_device_is_compatible(node, "marvell,kirkwood-cache")) { + if (of_address_to_resource(node, 0, &res)) + return -ENODEV; + + base = ioremap(res.start, resource_size(&res)); + if (!base) + return -ENOMEM; + + if (l2_wt_override) + writel(readl(base) | L2_WRITETHROUGH_KIRKWOOD, base); + else + writel(readl(base) & ~L2_WRITETHROUGH_KIRKWOOD, base); + } + + feroceon_l2_init(l2_wt_override); + + return 0; +} +#endif
Instantiate the L2 cache from DT. Indicate in DT where the cache control register is so that it is possible to enable/disable write through on the CPU. Signed-off-by: Andrew Lunn <andrew@lunn.ch> cc: devicetree@vger.kernel.org --- v2: Change compatible strings to follow l2x0 convention Only expect register for kirkwood-cache. Default to write through if no DT node. Rename writethrough to wt-override to follow l2cc binding. Split kirkwood.dtsi change into a patch of its own. v3 Remove wt-override from the binding Respect CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH --- .../devicetree/bindings/arm/mrvl/feroceon.txt | 16 ++++++++ arch/arm/include/asm/hardware/cache-feroceon-l2.h | 2 + arch/arm/mach-kirkwood/board-dt.c | 18 ++------- arch/arm/mm/cache-feroceon-l2.c | 43 ++++++++++++++++++++++ 4 files changed, 64 insertions(+), 15 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/mrvl/feroceon.txt