Message ID | 52AA783A.7090502@huawei.com |
---|---|
State | Accepted, archived |
Delegated to: | David Miller |
Headers | show |
On Fri, Dec 13, 2013 at 11:00:10AM +0800, Wang Weidong wrote: > when I modprobe sctp_probe, it failed with "FATAL: ". I found that > sctp should load before sctp_probe register jprobe. So I add a > sctp_setup_jprobe for loading 'sctp' when first failed to register > jprobe, just do this similar to dccp_probe. > > v2: add MODULE_SOFTDEP and check of request_module, as suggested by Neil > > Signed-off-by: Wang Weidong <wangweidong1@huawei.com> > --- > net/sctp/probe.c | 17 ++++++++++++++++- > 1 file changed, 16 insertions(+), 1 deletion(-) > > diff --git a/net/sctp/probe.c b/net/sctp/probe.c > index 53c452e..5e68b94 100644 > --- a/net/sctp/probe.c > +++ b/net/sctp/probe.c > @@ -38,6 +38,7 @@ > #include <net/sctp/sctp.h> > #include <net/sctp/sm.h> > > +MODULE_SOFTDEP("pre: sctp"); > MODULE_AUTHOR("Wei Yongjun <yjwei@cn.fujitsu.com>"); > MODULE_DESCRIPTION("SCTP snooper"); > MODULE_LICENSE("GPL"); > @@ -182,6 +183,20 @@ static struct jprobe sctp_recv_probe = { > .entry = jsctp_sf_eat_sack, > }; > > +static __init int sctp_setup_jprobe(void) > +{ > + int ret = register_jprobe(&sctp_recv_probe); > + > + if (ret) { > + if (request_module("sctp")) > + goto out; > + ret = register_jprobe(&sctp_recv_probe); > + } > + > +out: > + return ret; > +} > + > static __init int sctpprobe_init(void) > { > int ret = -ENOMEM; > @@ -202,7 +217,7 @@ static __init int sctpprobe_init(void) > &sctpprobe_fops)) > goto free_kfifo; > > - ret = register_jprobe(&sctp_recv_probe); > + ret = sctp_setup_jprobe(); You don't need to create your own function for this, you can collapse it down to a call to try_then_request_module(regitser_jprobe(...), "sctp"); Neil > if (ret) > goto remove_proc; > -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Wang weidong <wangweidong1@huawei.com> On 2013/12/13 20:26, Neil Horman wrote: > On Fri, Dec 13, 2013 at 11:00:10AM +0800, Wang Weidong wrote: >> when I modprobe sctp_probe, it failed with "FATAL: ". I found that >> sctp should load before sctp_probe register jprobe. So I add a >> sctp_setup_jprobe for loading 'sctp' when first failed to register >> jprobe, just do this similar to dccp_probe. >> >> v2: add MODULE_SOFTDEP and check of request_module, as suggested by Neil >> >> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> >> --- >> net/sctp/probe.c | 17 ++++++++++++++++- >> 1 file changed, 16 insertions(+), 1 deletion(-) >> >> diff --git a/net/sctp/probe.c b/net/sctp/probe.c >> index 53c452e..5e68b94 100644 >> --- a/net/sctp/probe.c >> +++ b/net/sctp/probe.c >> @@ -38,6 +38,7 @@ >> #include <net/sctp/sctp.h> >> #include <net/sctp/sm.h> >> >> +MODULE_SOFTDEP("pre: sctp"); >> MODULE_AUTHOR("Wei Yongjun <yjwei@cn.fujitsu.com>"); >> MODULE_DESCRIPTION("SCTP snooper"); >> MODULE_LICENSE("GPL"); >> @@ -182,6 +183,20 @@ static struct jprobe sctp_recv_probe = { >> .entry = jsctp_sf_eat_sack, >> }; >> >> +static __init int sctp_setup_jprobe(void) >> +{ >> + int ret = register_jprobe(&sctp_recv_probe); >> + >> + if (ret) { >> + if (request_module("sctp")) >> + goto out; >> + ret = register_jprobe(&sctp_recv_probe); >> + } >> + >> +out: >> + return ret; >> +} >> + >> static __init int sctpprobe_init(void) >> { >> int ret = -ENOMEM; >> @@ -202,7 +217,7 @@ static __init int sctpprobe_init(void) >> &sctpprobe_fops)) >> goto free_kfifo; >> >> - ret = register_jprobe(&sctp_recv_probe); >> + ret = sctp_setup_jprobe(); > You don't need to create your own function for this, you can collapse it down to > a call to try_then_request_module(regitser_jprobe(...), "sctp"); > Neil > It looks good. Thanks. I will try to use it and fix in v3. Regards. Wang > >> if (ret) >> goto remove_proc; >> > -- > To unsubscribe from this list: send the line "unsubscribe netdev" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2013/12/13 20:26, Neil Horman wrote: > On Fri, Dec 13, 2013 at 11:00:10AM +0800, Wang Weidong wrote: >> when I modprobe sctp_probe, it failed with "FATAL: ". I found that >> sctp should load before sctp_probe register jprobe. So I add a >> sctp_setup_jprobe for loading 'sctp' when first failed to register >> jprobe, just do this similar to dccp_probe. >> >> v2: add MODULE_SOFTDEP and check of request_module, as suggested by Neil >> >> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> >> --- >> net/sctp/probe.c | 17 ++++++++++++++++- >> 1 file changed, 16 insertions(+), 1 deletion(-) >> >> diff --git a/net/sctp/probe.c b/net/sctp/probe.c >> index 53c452e..5e68b94 100644 >> --- a/net/sctp/probe.c >> +++ b/net/sctp/probe.c >> @@ -38,6 +38,7 @@ >> #include <net/sctp/sctp.h> >> #include <net/sctp/sm.h> >> >> +MODULE_SOFTDEP("pre: sctp"); >> MODULE_AUTHOR("Wei Yongjun <yjwei@cn.fujitsu.com>"); >> MODULE_DESCRIPTION("SCTP snooper"); >> MODULE_LICENSE("GPL"); >> @@ -182,6 +183,20 @@ static struct jprobe sctp_recv_probe = { >> .entry = jsctp_sf_eat_sack, >> }; >> >> +static __init int sctp_setup_jprobe(void) >> +{ >> + int ret = register_jprobe(&sctp_recv_probe); >> + >> + if (ret) { >> + if (request_module("sctp")) >> + goto out; >> + ret = register_jprobe(&sctp_recv_probe); >> + } >> + >> +out: >> + return ret; >> +} >> + >> static __init int sctpprobe_init(void) >> { >> int ret = -ENOMEM; >> @@ -202,7 +217,7 @@ static __init int sctpprobe_init(void) >> &sctpprobe_fops)) >> goto free_kfifo; >> >> - ret = register_jprobe(&sctp_recv_probe); >> + ret = sctp_setup_jprobe(); > You don't need to create your own function for this, you can collapse it down to > a call to try_then_request_module(regitser_jprobe(...), "sctp"); > Neil > Hi Neil, I try to use try_then_request_module(!regitser_jprobe(...), "sctp"); I found that if I used this, I couldn't get the ture value which returned by register_jprobe(). Is the returned value not important? The problem("if sctp.ko doesn't exist") you had pointed out is exist as well. Regards. Wang > >> if (ret) >> goto remove_proc; >> > > . > -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Dec 16, 2013 at 10:47:00AM +0800, Wang Weidong wrote: > On 2013/12/13 20:26, Neil Horman wrote: > > On Fri, Dec 13, 2013 at 11:00:10AM +0800, Wang Weidong wrote: > >> when I modprobe sctp_probe, it failed with "FATAL: ". I found that > >> sctp should load before sctp_probe register jprobe. So I add a > >> sctp_setup_jprobe for loading 'sctp' when first failed to register > >> jprobe, just do this similar to dccp_probe. > >> > >> v2: add MODULE_SOFTDEP and check of request_module, as suggested by Neil > >> > >> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> > >> --- > >> net/sctp/probe.c | 17 ++++++++++++++++- > >> 1 file changed, 16 insertions(+), 1 deletion(-) > >> > >> diff --git a/net/sctp/probe.c b/net/sctp/probe.c > >> index 53c452e..5e68b94 100644 > >> --- a/net/sctp/probe.c > >> +++ b/net/sctp/probe.c > >> @@ -38,6 +38,7 @@ > >> #include <net/sctp/sctp.h> > >> #include <net/sctp/sm.h> > >> > >> +MODULE_SOFTDEP("pre: sctp"); > >> MODULE_AUTHOR("Wei Yongjun <yjwei@cn.fujitsu.com>"); > >> MODULE_DESCRIPTION("SCTP snooper"); > >> MODULE_LICENSE("GPL"); > >> @@ -182,6 +183,20 @@ static struct jprobe sctp_recv_probe = { > >> .entry = jsctp_sf_eat_sack, > >> }; > >> > >> +static __init int sctp_setup_jprobe(void) > >> +{ > >> + int ret = register_jprobe(&sctp_recv_probe); > >> + > >> + if (ret) { > >> + if (request_module("sctp")) > >> + goto out; > >> + ret = register_jprobe(&sctp_recv_probe); > >> + } > >> + > >> +out: > >> + return ret; > >> +} > >> + > >> static __init int sctpprobe_init(void) > >> { > >> int ret = -ENOMEM; > >> @@ -202,7 +217,7 @@ static __init int sctpprobe_init(void) > >> &sctpprobe_fops)) > >> goto free_kfifo; > >> > >> - ret = register_jprobe(&sctp_recv_probe); > >> + ret = sctp_setup_jprobe(); > > You don't need to create your own function for this, you can collapse it down to > > a call to try_then_request_module(regitser_jprobe(...), "sctp"); > > Neil > > > Hi Neil, > > I try to use try_then_request_module(!regitser_jprobe(...), "sctp"); I found that if > I used this, I couldn't get the ture value which returned by register_jprobe(). Is the > returned value not important? The problem("if sctp.ko doesn't exist") you had pointed out > is exist as well. > > Regards. > Wang Not sure I follow. There appear to be lots of examples in the kernel where exactly what you are trying to do is done. try_then_request_module calls your requested method, and if it returns non-zero, calls request_module, then calls your requested method again, returning the final result. What problem are you running into? Neil > > > >> if (ret) > >> goto remove_proc; > >> > > > > . > > > > > -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Wang Weidong <wangweidong1@huawei.com> On 2013/12/16 21:48, Neil Horman wrote: > On Mon, Dec 16, 2013 at 10:47:00AM +0800, Wang Weidong wrote: >> On 2013/12/13 20:26, Neil Horman wrote: >>> On Fri, Dec 13, 2013 at 11:00:10AM +0800, Wang Weidong wrote: >>>> when I modprobe sctp_probe, it failed with "FATAL: ". I found that >>>> sctp should load before sctp_probe register jprobe. So I add a >>>> sctp_setup_jprobe for loading 'sctp' when first failed to register >>>> jprobe, just do this similar to dccp_probe. >>>> >>>> v2: add MODULE_SOFTDEP and check of request_module, as suggested by Neil >>>> >>>> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> >>>> --- >>>> net/sctp/probe.c | 17 ++++++++++++++++- >>>> 1 file changed, 16 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/net/sctp/probe.c b/net/sctp/probe.c >>>> index 53c452e..5e68b94 100644 >>>> --- a/net/sctp/probe.c >>>> +++ b/net/sctp/probe.c >>>> @@ -38,6 +38,7 @@ >>>> #include <net/sctp/sctp.h> >>>> #include <net/sctp/sm.h> >>>> >>>> +MODULE_SOFTDEP("pre: sctp"); >>>> MODULE_AUTHOR("Wei Yongjun <yjwei@cn.fujitsu.com>"); >>>> MODULE_DESCRIPTION("SCTP snooper"); >>>> MODULE_LICENSE("GPL"); >>>> @@ -182,6 +183,20 @@ static struct jprobe sctp_recv_probe = { >>>> .entry = jsctp_sf_eat_sack, >>>> }; >>>> >>>> +static __init int sctp_setup_jprobe(void) >>>> +{ >>>> + int ret = register_jprobe(&sctp_recv_probe); >>>> + >>>> + if (ret) { >>>> + if (request_module("sctp")) >>>> + goto out; >>>> + ret = register_jprobe(&sctp_recv_probe); >>>> + } >>>> + >>>> +out: >>>> + return ret; >>>> +} >>>> + >>>> static __init int sctpprobe_init(void) >>>> { >>>> int ret = -ENOMEM; >>>> @@ -202,7 +217,7 @@ static __init int sctpprobe_init(void) >>>> &sctpprobe_fops)) >>>> goto free_kfifo; >>>> >>>> - ret = register_jprobe(&sctp_recv_probe); >>>> + ret = sctp_setup_jprobe(); >>> You don't need to create your own function for this, you can collapse it down to >>> a call to try_then_request_module(regitser_jprobe(...), "sctp"); >>> Neil >>> >> Hi Neil, >> >> I try to use try_then_request_module(!regitser_jprobe(...), "sctp"); I found that if >> I used this, I couldn't get the ture value which returned by register_jprobe(). Is the >> returned value not important? The problem("if sctp.ko doesn't exist") you had pointed out >> is exist as well. >> >> Regards. >> Wang > > Not sure I follow. There appear to be lots of examples in the kernel where I do this just like the dccp/probe.c do. So I think it can be an example. > exactly what you are trying to do is done. try_then_request_module calls your > requested method, and if it returns non-zero, calls request_module, then calls No actually. Just look the definition: #define try_then_request_module(x, mod...) \ ((x) ?: (__request_module(true, mod), (x))) if x return non-zero, it will return the value, not call request_module. > your requested method again, returning the final result. What problem are you > running into? > Neil > So I only can use it like this: try_then_request_module(!regitser_jprobe(...), "sctp"); when register_jprobe return 0 indicates success, I get the value is 1. It is OK. when register_jprobe is non-zero indicates failed, then calls request_module, and last calls register_jprobe. Here, 1)maybe it will failed return non-zero, what I get the value is !register_jprobe is 0 with losing the value. 2)request_module failed with the sctp is not exist, it will do the register_jprobe as well. Is there I am wrong somewhere? Regards. Wang >>> >>>> if (ret) >>>> goto remove_proc; >>>> >>> >>> . >>> >> >> >> > -- > To unsubscribe from this list: send the line "unsubscribe netdev" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Dec 16, 2013 at 10:14:55PM +0800, Wang Weidong wrote: > From: Wang Weidong <wangweidong1@huawei.com> > > On 2013/12/16 21:48, Neil Horman wrote: > >On Mon, Dec 16, 2013 at 10:47:00AM +0800, Wang Weidong wrote: > >>On 2013/12/13 20:26, Neil Horman wrote: > >>>On Fri, Dec 13, 2013 at 11:00:10AM +0800, Wang Weidong wrote: > >>>>when I modprobe sctp_probe, it failed with "FATAL: ". I found that > >>>>sctp should load before sctp_probe register jprobe. So I add a > >>>>sctp_setup_jprobe for loading 'sctp' when first failed to register > >>>>jprobe, just do this similar to dccp_probe. > >>>> > >>>>v2: add MODULE_SOFTDEP and check of request_module, as suggested by Neil > >>>> > >>>>Signed-off-by: Wang Weidong <wangweidong1@huawei.com> > >>>>--- > >>>> net/sctp/probe.c | 17 ++++++++++++++++- > >>>> 1 file changed, 16 insertions(+), 1 deletion(-) > >>>> > >>>>diff --git a/net/sctp/probe.c b/net/sctp/probe.c > >>>>index 53c452e..5e68b94 100644 > >>>>--- a/net/sctp/probe.c > >>>>+++ b/net/sctp/probe.c > >>>>@@ -38,6 +38,7 @@ > >>>> #include <net/sctp/sctp.h> > >>>> #include <net/sctp/sm.h> > >>>> > >>>>+MODULE_SOFTDEP("pre: sctp"); > >>>> MODULE_AUTHOR("Wei Yongjun <yjwei@cn.fujitsu.com>"); > >>>> MODULE_DESCRIPTION("SCTP snooper"); > >>>> MODULE_LICENSE("GPL"); > >>>>@@ -182,6 +183,20 @@ static struct jprobe sctp_recv_probe = { > >>>> .entry = jsctp_sf_eat_sack, > >>>> }; > >>>> > >>>>+static __init int sctp_setup_jprobe(void) > >>>>+{ > >>>>+ int ret = register_jprobe(&sctp_recv_probe); > >>>>+ > >>>>+ if (ret) { > >>>>+ if (request_module("sctp")) > >>>>+ goto out; > >>>>+ ret = register_jprobe(&sctp_recv_probe); > >>>>+ } > >>>>+ > >>>>+out: > >>>>+ return ret; > >>>>+} > >>>>+ > >>>> static __init int sctpprobe_init(void) > >>>> { > >>>> int ret = -ENOMEM; > >>>>@@ -202,7 +217,7 @@ static __init int sctpprobe_init(void) > >>>> &sctpprobe_fops)) > >>>> goto free_kfifo; > >>>> > >>>>- ret = register_jprobe(&sctp_recv_probe); > >>>>+ ret = sctp_setup_jprobe(); > >>>You don't need to create your own function for this, you can collapse it down to > >>>a call to try_then_request_module(regitser_jprobe(...), "sctp"); > >>>Neil > >>> > >>Hi Neil, > >> > >>I try to use try_then_request_module(!regitser_jprobe(...), "sctp"); I found that if > >>I used this, I couldn't get the ture value which returned by register_jprobe(). Is the > >>returned value not important? The problem("if sctp.ko doesn't exist") you had pointed out > >>is exist as well. > >> > >>Regards. > >>Wang > > > >Not sure I follow. There appear to be lots of examples in the kernel where > > I do this just like the dccp/probe.c do. So I think it can be an example. > Ah thats right, I remember doing this before now. My bad. > >exactly what you are trying to do is done. try_then_request_module calls your > >requested method, and if it returns non-zero, calls request_module, then calls > > No actually. Just look the definition: > #define try_then_request_module(x, mod...) \ > ((x) ?: (__request_module(true, mod), (x))) > if x return non-zero, it will return the value, not call request_module. > > >your requested method again, returning the final result. What problem are you > >running into? > >Neil > > > > So I only can use it like this: > try_then_request_module(!regitser_jprobe(...), "sctp"); > > when register_jprobe return 0 indicates success, I get the value is 1. It is OK. > > when register_jprobe is non-zero indicates failed, then calls request_module, > and last calls register_jprobe. Here, > 1)maybe it will failed return non-zero, what I get the value is !register_jprobe > is 0 with losing the value. > 2)request_module failed with the sctp is not exist, it will do the register_jprobe > as well. > > Is there I am wrong somewhere? > It really seems like there should be a way to roll up what you want into the try_then_request_module macro. What about: ret = try_then_request_module((register_jprobe(...) == 0), "sctp"); That seems like it should work. It will mask the actual return value of register_jprobe though I think, which kind of sucks. Its almost like we need another variant of this macro that accepts an expected condition result so the macro can use it to compare, something like: #define try_then_request_module_cond(x, result, mod...) \ ((x) == (result) ?: __request_module(true, mod), (x))) that would let you set an expected comparison value for your macro, but get the result of the method if it still fails after the module is loaded, or if it fails to load. Thats probably a cleanup for a second patch. I think your version two is probably as close as we're going to get right now. So for v2: Acked-by: Neil Horman <nhorman@tuxdriver.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Wang Weidong <wangweidong1@huawei.com> On 2013/12/16 22:32, Neil Horman wrote: > On Mon, Dec 16, 2013 at 10:14:55PM +0800, Wang Weidong wrote: >> From: Wang Weidong <wangweidong1@huawei.com> >> >> On 2013/12/16 21:48, Neil Horman wrote: >>> On Mon, Dec 16, 2013 at 10:47:00AM +0800, Wang Weidong wrote: >>>> On 2013/12/13 20:26, Neil Horman wrote: >>>>> On Fri, Dec 13, 2013 at 11:00:10AM +0800, Wang Weidong wrote: >>>>>> when I modprobe sctp_probe, it failed with "FATAL: ". I found that >>>>>> sctp should load before sctp_probe register jprobe. So I add a >>>>>> sctp_setup_jprobe for loading 'sctp' when first failed to register >>>>>> jprobe, just do this similar to dccp_probe. >>>>>> >>>>>> v2: add MODULE_SOFTDEP and check of request_module, as suggested by Neil >>>>>> >>>>>> Signed-off-by: Wang Weidong <wangweidong1@huawei.com> >>>>>> --- >>>>>> net/sctp/probe.c | 17 ++++++++++++++++- >>>>>> 1 file changed, 16 insertions(+), 1 deletion(-) >>>>>> >>>>>> diff --git a/net/sctp/probe.c b/net/sctp/probe.c >>>>>> index 53c452e..5e68b94 100644 >>>>>> --- a/net/sctp/probe.c >>>>>> +++ b/net/sctp/probe.c >>>>>> @@ -38,6 +38,7 @@ >>>>>> #include <net/sctp/sctp.h> >>>>>> #include <net/sctp/sm.h> >>>>>> >>>>>> +MODULE_SOFTDEP("pre: sctp"); >>>>>> MODULE_AUTHOR("Wei Yongjun <yjwei@cn.fujitsu.com>"); >>>>>> MODULE_DESCRIPTION("SCTP snooper"); >>>>>> MODULE_LICENSE("GPL"); >>>>>> @@ -182,6 +183,20 @@ static struct jprobe sctp_recv_probe = { >>>>>> .entry = jsctp_sf_eat_sack, >>>>>> }; >>>>>> >>>>>> +static __init int sctp_setup_jprobe(void) >>>>>> +{ >>>>>> + int ret = register_jprobe(&sctp_recv_probe); >>>>>> + >>>>>> + if (ret) { >>>>>> + if (request_module("sctp")) >>>>>> + goto out; >>>>>> + ret = register_jprobe(&sctp_recv_probe); >>>>>> + } >>>>>> + >>>>>> +out: >>>>>> + return ret; >>>>>> +} >>>>>> + >>>>>> static __init int sctpprobe_init(void) >>>>>> { >>>>>> int ret = -ENOMEM; >>>>>> @@ -202,7 +217,7 @@ static __init int sctpprobe_init(void) >>>>>> &sctpprobe_fops)) >>>>>> goto free_kfifo; >>>>>> >>>>>> - ret = register_jprobe(&sctp_recv_probe); >>>>>> + ret = sctp_setup_jprobe(); >>>>> You don't need to create your own function for this, you can collapse it down to >>>>> a call to try_then_request_module(regitser_jprobe(...), "sctp"); >>>>> Neil >>>>> >>>> Hi Neil, >>>> >>>> I try to use try_then_request_module(!regitser_jprobe(...), "sctp"); I found that if >>>> I used this, I couldn't get the ture value which returned by register_jprobe(). Is the >>>> returned value not important? The problem("if sctp.ko doesn't exist") you had pointed out >>>> is exist as well. >>>> >>>> Regards. >>>> Wang >>> >>> Not sure I follow. There appear to be lots of examples in the kernel where >> >> I do this just like the dccp/probe.c do. So I think it can be an example. >> > > Ah thats right, I remember doing this before now. My bad. > >>> exactly what you are trying to do is done. try_then_request_module calls your >>> requested method, and if it returns non-zero, calls request_module, then calls >> >> No actually. Just look the definition: >> #define try_then_request_module(x, mod...) \ >> ((x) ?: (__request_module(true, mod), (x))) >> if x return non-zero, it will return the value, not call request_module. >> >>> your requested method again, returning the final result. What problem are you >>> running into? >>> Neil >>> >> >> So I only can use it like this: >> try_then_request_module(!regitser_jprobe(...), "sctp"); >> >> when register_jprobe return 0 indicates success, I get the value is 1. It is OK. >> >> when register_jprobe is non-zero indicates failed, then calls request_module, >> and last calls register_jprobe. Here, >> 1)maybe it will failed return non-zero, what I get the value is !register_jprobe >> is 0 with losing the value. >> 2)request_module failed with the sctp is not exist, it will do the register_jprobe >> as well. >> >> Is there I am wrong somewhere? >> > > It really seems like there should be a way to roll up what you want into the > try_then_request_module macro. What about: > > ret = try_then_request_module((register_jprobe(...) == 0), "sctp"); > The first problem maybe exist. because the last value is x. So if use this it always return (register_jprobe(...) == 0) while the value is only 1 or 0. > That seems like it should work. It will mask the actual return value of > register_jprobe though I think, which kind of sucks. Its almost like we need > another variant of this macro that accepts an expected condition result so the > macro can use it to compare, something like: > > #define try_then_request_module_cond(x, result, mod...) \ > ((x) == (result) ?: __request_module(true, mod), (x))) > > that would let you set an expected comparison value for your macro, but get the > result of the method if it still fails after the module is loaded, or if it > fails to load. I think this is a good idea. > > Thats probably a cleanup for a second patch. I think your version two is > probably as close as we're going to get right now. So for v2: > > Acked-by: Neil Horman <nhorman@tuxdriver.com> > Thanks. Will you send the cleanup patch? Regards. Wang -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Dec 16, 2013 at 10:49:46PM +0800, Wang Weidong wrote: > From: Wang Weidong <wangweidong1@huawei.com> > > On 2013/12/16 22:32, Neil Horman wrote: > >On Mon, Dec 16, 2013 at 10:14:55PM +0800, Wang Weidong wrote: > >>From: Wang Weidong <wangweidong1@huawei.com> > >> > >>On 2013/12/16 21:48, Neil Horman wrote: > >>>On Mon, Dec 16, 2013 at 10:47:00AM +0800, Wang Weidong wrote: > >>>>On 2013/12/13 20:26, Neil Horman wrote: > >>>>>On Fri, Dec 13, 2013 at 11:00:10AM +0800, Wang Weidong wrote: > >>>>>>when I modprobe sctp_probe, it failed with "FATAL: ". I found that > >>>>>>sctp should load before sctp_probe register jprobe. So I add a > >>>>>>sctp_setup_jprobe for loading 'sctp' when first failed to register > >>>>>>jprobe, just do this similar to dccp_probe. > >>>>>> > >>>>>>v2: add MODULE_SOFTDEP and check of request_module, as suggested by Neil > >>>>>> > >>>>>>Signed-off-by: Wang Weidong <wangweidong1@huawei.com> > >>>>>>--- > >>>>>> net/sctp/probe.c | 17 ++++++++++++++++- > >>>>>> 1 file changed, 16 insertions(+), 1 deletion(-) > >>>>>> > >>>>>>diff --git a/net/sctp/probe.c b/net/sctp/probe.c > >>>>>>index 53c452e..5e68b94 100644 > >>>>>>--- a/net/sctp/probe.c > >>>>>>+++ b/net/sctp/probe.c > >>>>>>@@ -38,6 +38,7 @@ > >>>>>> #include <net/sctp/sctp.h> > >>>>>> #include <net/sctp/sm.h> > >>>>>> > >>>>>>+MODULE_SOFTDEP("pre: sctp"); > >>>>>> MODULE_AUTHOR("Wei Yongjun <yjwei@cn.fujitsu.com>"); > >>>>>> MODULE_DESCRIPTION("SCTP snooper"); > >>>>>> MODULE_LICENSE("GPL"); > >>>>>>@@ -182,6 +183,20 @@ static struct jprobe sctp_recv_probe = { > >>>>>> .entry = jsctp_sf_eat_sack, > >>>>>> }; > >>>>>> > >>>>>>+static __init int sctp_setup_jprobe(void) > >>>>>>+{ > >>>>>>+ int ret = register_jprobe(&sctp_recv_probe); > >>>>>>+ > >>>>>>+ if (ret) { > >>>>>>+ if (request_module("sctp")) > >>>>>>+ goto out; > >>>>>>+ ret = register_jprobe(&sctp_recv_probe); > >>>>>>+ } > >>>>>>+ > >>>>>>+out: > >>>>>>+ return ret; > >>>>>>+} > >>>>>>+ > >>>>>> static __init int sctpprobe_init(void) > >>>>>> { > >>>>>> int ret = -ENOMEM; > >>>>>>@@ -202,7 +217,7 @@ static __init int sctpprobe_init(void) > >>>>>> &sctpprobe_fops)) > >>>>>> goto free_kfifo; > >>>>>> > >>>>>>- ret = register_jprobe(&sctp_recv_probe); > >>>>>>+ ret = sctp_setup_jprobe(); > >>>>>You don't need to create your own function for this, you can collapse it down to > >>>>>a call to try_then_request_module(regitser_jprobe(...), "sctp"); > >>>>>Neil > >>>>> > >>>>Hi Neil, > >>>> > >>>>I try to use try_then_request_module(!regitser_jprobe(...), "sctp"); I found that if > >>>>I used this, I couldn't get the ture value which returned by register_jprobe(). Is the > >>>>returned value not important? The problem("if sctp.ko doesn't exist") you had pointed out > >>>>is exist as well. > >>>> > >>>>Regards. > >>>>Wang > >>> > >>>Not sure I follow. There appear to be lots of examples in the kernel where > >> > >>I do this just like the dccp/probe.c do. So I think it can be an example. > >> > > > >Ah thats right, I remember doing this before now. My bad. > > > >>>exactly what you are trying to do is done. try_then_request_module calls your > >>>requested method, and if it returns non-zero, calls request_module, then calls > >> > >>No actually. Just look the definition: > >>#define try_then_request_module(x, mod...) \ > >> ((x) ?: (__request_module(true, mod), (x))) > >>if x return non-zero, it will return the value, not call request_module. > >> > >>>your requested method again, returning the final result. What problem are you > >>>running into? > >>>Neil > >>> > >> > >>So I only can use it like this: > >>try_then_request_module(!regitser_jprobe(...), "sctp"); > >> > >>when register_jprobe return 0 indicates success, I get the value is 1. It is OK. > >> > >>when register_jprobe is non-zero indicates failed, then calls request_module, > >>and last calls register_jprobe. Here, > >>1)maybe it will failed return non-zero, what I get the value is !register_jprobe > >>is 0 with losing the value. > >>2)request_module failed with the sctp is not exist, it will do the register_jprobe > >>as well. > >> > >>Is there I am wrong somewhere? > >> > > > >It really seems like there should be a way to roll up what you want into the > >try_then_request_module macro. What about: > > > >ret = try_then_request_module((register_jprobe(...) == 0), "sctp"); > > > The first problem maybe exist. because the last value is x. So if use this > it always return (register_jprobe(...) == 0) while the value is only 1 or 0. > > >That seems like it should work. It will mask the actual return value of > >register_jprobe though I think, which kind of sucks. Its almost like we need > >another variant of this macro that accepts an expected condition result so the > >macro can use it to compare, something like: > > > >#define try_then_request_module_cond(x, result, mod...) \ > > ((x) == (result) ?: __request_module(true, mod), (x))) > > > >that would let you set an expected comparison value for your macro, but get the > >result of the method if it still fails after the module is loaded, or if it > >fails to load. > > I think this is a good idea. > > > > >Thats probably a cleanup for a second patch. I think your version two is > >probably as close as we're going to get right now. So for v2: > > > >Acked-by: Neil Horman <nhorman@tuxdriver.com> > > > Thanks. > > Will you send the cleanup patch? > Yeah, I'll look into developing a new macro and cleaning it up as soon as I can. Thanks Neil -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Wang Weidong <wangweidong1@huawei.com> Date: Fri, 13 Dec 2013 11:00:10 +0800 > when I modprobe sctp_probe, it failed with "FATAL: ". I found that > sctp should load before sctp_probe register jprobe. So I add a > sctp_setup_jprobe for loading 'sctp' when first failed to register > jprobe, just do this similar to dccp_probe. > > v2: add MODULE_SOFTDEP and check of request_module, as suggested by Neil > > Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Applied. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/net/sctp/probe.c b/net/sctp/probe.c index 53c452e..5e68b94 100644 --- a/net/sctp/probe.c +++ b/net/sctp/probe.c @@ -38,6 +38,7 @@ #include <net/sctp/sctp.h> #include <net/sctp/sm.h> +MODULE_SOFTDEP("pre: sctp"); MODULE_AUTHOR("Wei Yongjun <yjwei@cn.fujitsu.com>"); MODULE_DESCRIPTION("SCTP snooper"); MODULE_LICENSE("GPL"); @@ -182,6 +183,20 @@ static struct jprobe sctp_recv_probe = { .entry = jsctp_sf_eat_sack, }; +static __init int sctp_setup_jprobe(void) +{ + int ret = register_jprobe(&sctp_recv_probe); + + if (ret) { + if (request_module("sctp")) + goto out; + ret = register_jprobe(&sctp_recv_probe); + } + +out: + return ret; +} + static __init int sctpprobe_init(void) { int ret = -ENOMEM; @@ -202,7 +217,7 @@ static __init int sctpprobe_init(void) &sctpprobe_fops)) goto free_kfifo; - ret = register_jprobe(&sctp_recv_probe); + ret = sctp_setup_jprobe(); if (ret) goto remove_proc;
when I modprobe sctp_probe, it failed with "FATAL: ". I found that sctp should load before sctp_probe register jprobe. So I add a sctp_setup_jprobe for loading 'sctp' when first failed to register jprobe, just do this similar to dccp_probe. v2: add MODULE_SOFTDEP and check of request_module, as suggested by Neil Signed-off-by: Wang Weidong <wangweidong1@huawei.com> --- net/sctp/probe.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)