| Message ID | 1384524058-20712-1-git-send-email-u.kleine-koenig@pengutronix.de |
|---|---|
| State | New |
| Headers | show |
On 15:00 Fri 15 Nov , Uwe Kleine-K??nig wrote: > The driver needs the symbol AT91_SLOW_CLOCK which is defined in > arch/arm/mach-at91/include/mach/hardware.h. This file is included > implicitly via linux/module.h -> linux/kmod.h -> linux/gfp.h -> > linux/mmzone.h -> linux/memory_hotplug.h -> linux/notifier.h -> > linux/srcu.h -> linux/workqueue.h -> linux/timer.h -> linux/ktime.h -> > linux/jiffies.h -> linux/timex.h -> mach/timex.h -> mach/hardware.h . > > So better include it explicitly not only because the last link will go > away soon. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> we should never use this symbol you need to request the clock clk32k Best Regards, J. > --- > drivers/rtc/rtc-at91sam9.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c > index 309b8b3..5963743 100644 > --- a/drivers/rtc/rtc-at91sam9.c > +++ b/drivers/rtc/rtc-at91sam9.c > @@ -24,7 +24,7 @@ > > #include <mach/at91_rtt.h> > #include <mach/cpu.h> > - > +#include <mach/hardware.h> > > /* > * This driver uses two configurable hardware resources that live in the > -- > 1.8.4.2 >
Hello, On Fri, Nov 15, 2013 at 03:23:27PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote: > On 15:00 Fri 15 Nov , Uwe Kleine-K??nig wrote: > > The driver needs the symbol AT91_SLOW_CLOCK which is defined in > > arch/arm/mach-at91/include/mach/hardware.h. This file is included > > implicitly via linux/module.h -> linux/kmod.h -> linux/gfp.h -> > > linux/mmzone.h -> linux/memory_hotplug.h -> linux/notifier.h -> > > linux/srcu.h -> linux/workqueue.h -> linux/timer.h -> linux/ktime.h -> > > linux/jiffies.h -> linux/timex.h -> mach/timex.h -> mach/hardware.h . > > > > So better include it explicitly not only because the last link will go > > away soon. > > > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > > we should never use this symbol you need to request the clock clk32k IMHO this should be addressed in another patch. My intent is to get rid of <mach/timex.h>. So I let someone else take this patch opportunity. Best regards Uwe
On Fri, Nov 15, 2013 at 03:00:58PM +0100, Uwe Kleine-König wrote: > The driver needs the symbol AT91_SLOW_CLOCK which is defined in > arch/arm/mach-at91/include/mach/hardware.h. This file is included > implicitly via linux/module.h -> linux/kmod.h -> linux/gfp.h -> > linux/mmzone.h -> linux/memory_hotplug.h -> linux/notifier.h -> > linux/srcu.h -> linux/workqueue.h -> linux/timer.h -> linux/ktime.h -> > linux/jiffies.h -> linux/timex.h -> mach/timex.h -> mach/hardware.h . > > So better include it explicitly not only because the last link will go > away soon. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Ping. Is this patch ok despite Jean-Christophe's objection? Best regards Uwe > --- > drivers/rtc/rtc-at91sam9.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c > index 309b8b3..5963743 100644 > --- a/drivers/rtc/rtc-at91sam9.c > +++ b/drivers/rtc/rtc-at91sam9.c > @@ -24,7 +24,7 @@ > > #include <mach/at91_rtt.h> > #include <mach/cpu.h> > - > +#include <mach/hardware.h> > > /* > * This driver uses two configurable hardware resources that live in the > -- > 1.8.4.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On Tue, Nov 26, 2013 at 02:41:17PM +0100, Uwe Kleine-König wrote: > On Fri, Nov 15, 2013 at 03:00:58PM +0100, Uwe Kleine-König wrote: > > The driver needs the symbol AT91_SLOW_CLOCK which is defined in > > arch/arm/mach-at91/include/mach/hardware.h. This file is included > > implicitly via linux/module.h -> linux/kmod.h -> linux/gfp.h -> > > linux/mmzone.h -> linux/memory_hotplug.h -> linux/notifier.h -> > > linux/srcu.h -> linux/workqueue.h -> linux/timer.h -> linux/ktime.h -> > > linux/jiffies.h -> linux/timex.h -> mach/timex.h -> mach/hardware.h . > > > > So better include it explicitly not only because the last link will go > > away soon. > > > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > Ping. Is this patch ok despite Jean-Christophe's objection? I saw that akpm already took it into his tree. Best regards Uwe
Hello Andrew, On Tue, Nov 26, 2013 at 02:44:44PM +0100, Uwe Kleine-König wrote: > On Tue, Nov 26, 2013 at 02:41:17PM +0100, Uwe Kleine-König wrote: > > On Fri, Nov 15, 2013 at 03:00:58PM +0100, Uwe Kleine-König wrote: > > > The driver needs the symbol AT91_SLOW_CLOCK which is defined in > > > arch/arm/mach-at91/include/mach/hardware.h. This file is included > > > implicitly via linux/module.h -> linux/kmod.h -> linux/gfp.h -> > > > linux/mmzone.h -> linux/memory_hotplug.h -> linux/notifier.h -> > > > linux/srcu.h -> linux/workqueue.h -> linux/timer.h -> linux/ktime.h -> > > > linux/jiffies.h -> linux/timex.h -> mach/timex.h -> mach/hardware.h . > > > > > > So better include it explicitly not only because the last link will go > > > away soon. > > > > > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> > > Ping. Is this patch ok despite Jean-Christophe's objection? > I saw that akpm already took it into his tree. This patch is one of the last few that are needed to drop <mach/timex.h> alltogether that I don't have an ack from the respective maintainer yet. Can you give your ack instead of sending the patch to Linus, then I'd take it with the patch dropping <mach/timex.h> to make it easier to merge. Thanks Uwe
On 15/11/2013 15:55, Uwe Kleine-König : > Hello, > > On Fri, Nov 15, 2013 at 03:23:27PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote: >> On 15:00 Fri 15 Nov , Uwe Kleine-K??nig wrote: >>> The driver needs the symbol AT91_SLOW_CLOCK which is defined in >>> arch/arm/mach-at91/include/mach/hardware.h. This file is included >>> implicitly via linux/module.h -> linux/kmod.h -> linux/gfp.h -> >>> linux/mmzone.h -> linux/memory_hotplug.h -> linux/notifier.h -> >>> linux/srcu.h -> linux/workqueue.h -> linux/timer.h -> linux/ktime.h -> >>> linux/jiffies.h -> linux/timex.h -> mach/timex.h -> mach/hardware.h . >>> >>> So better include it explicitly not only because the last link will go >>> away soon. >>> >>> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> >> >> we should never use this symbol you need to request the clock clk32k > IMHO this should be addressed in another patch. My intent is to get rid > of <mach/timex.h>. So I let someone else take this patch opportunity. I understand the objective of this patch. So, in the meantime, you have my: Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> (if it is not too late, Uwe). Thanks for addressing that, bye,
On Tue, 26 Nov 2013 19:36:29 +0100 Uwe Kleine-K__nig <u.kleine-koenig@pengutronix.de> wrote: > Hello Andrew, > > On Tue, Nov 26, 2013 at 02:44:44PM +0100, Uwe Kleine-K__nig wrote: > > On Tue, Nov 26, 2013 at 02:41:17PM +0100, Uwe Kleine-K__nig wrote: > > > On Fri, Nov 15, 2013 at 03:00:58PM +0100, Uwe Kleine-K__nig wrote: > > > > The driver needs the symbol AT91_SLOW_CLOCK which is defined in > > > > arch/arm/mach-at91/include/mach/hardware.h. This file is included > > > > implicitly via linux/module.h -> linux/kmod.h -> linux/gfp.h -> > > > > linux/mmzone.h -> linux/memory_hotplug.h -> linux/notifier.h -> > > > > linux/srcu.h -> linux/workqueue.h -> linux/timer.h -> linux/ktime.h -> > > > > linux/jiffies.h -> linux/timex.h -> mach/timex.h -> mach/hardware.h . > > > > > > > > So better include it explicitly not only because the last link will go > > > > away soon. > > > > > > > > Signed-off-by: Uwe Kleine-K__nig <u.kleine-koenig@pengutronix.de> > > > Ping. Is this patch ok despite Jean-Christophe's objection? > > I saw that akpm already took it into his tree. > This patch is one of the last few that are needed to drop <mach/timex.h> > alltogether that I don't have an ack from the respective maintainer yet. > > Can you give your ack instead of sending the patch to Linus, then I'd > take it with the patch dropping <mach/timex.h> to make it easier to > merge. ack ;) I dropped my copy.
Hello Andrew, On Mon, Dec 16, 2013 at 12:11:58AM -0800, Andrew Morton wrote: > On Tue, 26 Nov 2013 19:36:29 +0100 Uwe Kleine-K__nig <u.kleine-koenig@pengutronix.de> wrote: > > On Tue, Nov 26, 2013 at 02:44:44PM +0100, Uwe Kleine-K__nig wrote: > > > On Tue, Nov 26, 2013 at 02:41:17PM +0100, Uwe Kleine-K__nig wrote: > > > > On Fri, Nov 15, 2013 at 03:00:58PM +0100, Uwe Kleine-K__nig wrote: > > > > > The driver needs the symbol AT91_SLOW_CLOCK which is defined in > > > > > arch/arm/mach-at91/include/mach/hardware.h. This file is included > > > > > implicitly via linux/module.h -> linux/kmod.h -> linux/gfp.h -> > > > > > linux/mmzone.h -> linux/memory_hotplug.h -> linux/notifier.h -> > > > > > linux/srcu.h -> linux/workqueue.h -> linux/timer.h -> linux/ktime.h -> > > > > > linux/jiffies.h -> linux/timex.h -> mach/timex.h -> mach/hardware.h . > > > > > > > > > > So better include it explicitly not only because the last link will go > > > > > away soon. > > > > > > > > > > Signed-off-by: Uwe Kleine-K__nig <u.kleine-koenig@pengutronix.de> > > > > Ping. Is this patch ok despite Jean-Christophe's objection? > > > I saw that akpm already took it into his tree. > > This patch is one of the last few that are needed to drop <mach/timex.h> > > alltogether that I don't have an ack from the respective maintainer yet. > > > > Can you give your ack instead of sending the patch to Linus, then I'd > > take it with the patch dropping <mach/timex.h> to make it easier to > > merge. > > ack ;) thanks. There is another rtc change that I didn't receive any feedback for from a maintainer: rtc: pxa: drop unused #define TIMER_FREQ . In the meantime I send a pull request asking to ignore that I didn't get any maintainer reply for the rtc changes. Do you think it's sensible to change the entry in MAINTAINERS? Any combination of: a) drop Alessandro's M: line b) add you c) change Status from Maintained to Odd Fixes or Orphan > I dropped my copy. fine, thanks I'll wait for some time now before adding your ack to my tree to prevent that you give me an ack for the other change just when I sent a new pull request :-) Uwe
On Mon, 16 Dec 2013 20:28:16 +0100 Uwe Kleine-K__nig <u.kleine-koenig@pengutronix.de> wrote: > Hello Andrew, > > On Mon, Dec 16, 2013 at 12:11:58AM -0800, Andrew Morton wrote: > > On Tue, 26 Nov 2013 19:36:29 +0100 Uwe Kleine-K__nig <u.kleine-koenig@pengutronix.de> wrote: > > > On Tue, Nov 26, 2013 at 02:44:44PM +0100, Uwe Kleine-K__nig wrote: > > > > On Tue, Nov 26, 2013 at 02:41:17PM +0100, Uwe Kleine-K__nig wrote: > > > > > On Fri, Nov 15, 2013 at 03:00:58PM +0100, Uwe Kleine-K__nig wrote: > > > > > > The driver needs the symbol AT91_SLOW_CLOCK which is defined in > > > > > > arch/arm/mach-at91/include/mach/hardware.h. This file is included > > > > > > implicitly via linux/module.h -> linux/kmod.h -> linux/gfp.h -> > > > > > > linux/mmzone.h -> linux/memory_hotplug.h -> linux/notifier.h -> > > > > > > linux/srcu.h -> linux/workqueue.h -> linux/timer.h -> linux/ktime.h -> > > > > > > linux/jiffies.h -> linux/timex.h -> mach/timex.h -> mach/hardware.h . > > > > > > > > > > > > So better include it explicitly not only because the last link will go > > > > > > away soon. > > > > > > > > > > > > Signed-off-by: Uwe Kleine-K__nig <u.kleine-koenig@pengutronix.de> > > > > > Ping. Is this patch ok despite Jean-Christophe's objection? > > > > I saw that akpm already took it into his tree. > > > This patch is one of the last few that are needed to drop <mach/timex.h> > > > alltogether that I don't have an ack from the respective maintainer yet. > > > > > > Can you give your ack instead of sending the patch to Linus, then I'd > > > take it with the patch dropping <mach/timex.h> to make it easier to > > > merge. > > > > ack ;) > thanks. There is another rtc change that I didn't receive any feedback > for from a maintainer: > > rtc: pxa: drop unused #define TIMER_FREQ ack. Robert Jarzmik also acked that one. > . In the meantime I send a pull request asking to ignore that I didn't > get any maintainer reply for the rtc changes. Do you think it's sensible > to change the entry in MAINTAINERS? Any combination of: > > a) drop Alessandro's M: line > b) add you > c) change Status from Maintained to Odd Fixes or Orphan Yeah, I should have a couple hundred MAINTAINERS entries. Instead I just lurk on mailing lists ;)
Hello Andrew, On Mon, Dec 16, 2013 at 02:46:12PM -0800, Andrew Morton wrote: > On Mon, 16 Dec 2013 20:28:16 +0100 Uwe Kleine-K__nig <u.kleine-koenig@pengutronix.de> wrote: > > > Hello Andrew, > > > > On Mon, Dec 16, 2013 at 12:11:58AM -0800, Andrew Morton wrote: > > > On Tue, 26 Nov 2013 19:36:29 +0100 Uwe Kleine-K__nig <u.kleine-koenig@pengutronix.de> wrote: > > > > On Tue, Nov 26, 2013 at 02:44:44PM +0100, Uwe Kleine-K__nig wrote: > > > > > On Tue, Nov 26, 2013 at 02:41:17PM +0100, Uwe Kleine-K__nig wrote: > > > > > > On Fri, Nov 15, 2013 at 03:00:58PM +0100, Uwe Kleine-K__nig wrote: > > > > > > > The driver needs the symbol AT91_SLOW_CLOCK which is defined in > > > > > > > arch/arm/mach-at91/include/mach/hardware.h. This file is included > > > > > > > implicitly via linux/module.h -> linux/kmod.h -> linux/gfp.h -> > > > > > > > linux/mmzone.h -> linux/memory_hotplug.h -> linux/notifier.h -> > > > > > > > linux/srcu.h -> linux/workqueue.h -> linux/timer.h -> linux/ktime.h -> > > > > > > > linux/jiffies.h -> linux/timex.h -> mach/timex.h -> mach/hardware.h . > > > > > > > > > > > > > > So better include it explicitly not only because the last link will go > > > > > > > away soon. > > > > > > > > > > > > > > Signed-off-by: Uwe Kleine-K__nig <u.kleine-koenig@pengutronix.de> > > > > > > Ping. Is this patch ok despite Jean-Christophe's objection? > > > > > I saw that akpm already took it into his tree. > > > > This patch is one of the last few that are needed to drop <mach/timex.h> > > > > alltogether that I don't have an ack from the respective maintainer yet. > > > > > > > > Can you give your ack instead of sending the patch to Linus, then I'd > > > > take it with the patch dropping <mach/timex.h> to make it easier to > > > > merge. > > > > > > ack ;) > > thanks. There is another rtc change that I didn't receive any feedback > > for from a maintainer: > > > > rtc: pxa: drop unused #define TIMER_FREQ > > ack. Robert Jarzmik also acked that one. Thanks, I saw Robert Jarzmik's ack, but for taking a $subsystem1 patch through the $subsystem2 tree, I like to have an ack of the maintainer of $subsystem1. And in this regard I think yours is better than Robert's (who is the original author of the driver). > > . In the meantime I send a pull request asking to ignore that I didn't > > get any maintainer reply for the rtc changes. Do you think it's sensible > > to change the entry in MAINTAINERS? Any combination of: > > > > a) drop Alessandro's M: line > > b) add you > > c) change Status from Maintained to Odd Fixes or Orphan > > Yeah, I should have a couple hundred MAINTAINERS entries. Instead I > just lurk on mailing lists ;) So only a) and c). Best regards Uwe
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 309b8b3..5963743 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -24,7 +24,7 @@ #include <mach/at91_rtt.h> #include <mach/cpu.h> - +#include <mach/hardware.h> /* * This driver uses two configurable hardware resources that live in the
The driver needs the symbol AT91_SLOW_CLOCK which is defined in arch/arm/mach-at91/include/mach/hardware.h. This file is included implicitly via linux/module.h -> linux/kmod.h -> linux/gfp.h -> linux/mmzone.h -> linux/memory_hotplug.h -> linux/notifier.h -> linux/srcu.h -> linux/workqueue.h -> linux/timer.h -> linux/ktime.h -> linux/jiffies.h -> linux/timex.h -> mach/timex.h -> mach/hardware.h . So better include it explicitly not only because the last link will go away soon. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- drivers/rtc/rtc-at91sam9.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)