diff mbox

powerpc: PPC_CELL_NATIVE should select PCI

Message ID alpine.LRH.2.00.0904020931520.11458@vixen.sonytel.be
State New
Headers show

Commit Message

Geert Uytterhoeven April 2, 2009, 7:34 a.m. UTC 
On Wed, 1 Apr 2009, Benjamin Herrenschmidt wrote:
> On Wed, 2009-04-01 at 12:45 +0200, Arnd Bergmann wrote:
> > On Wednesday 01 April 2009, Benjamin Herrenschmidt wrote:
> > > On Wed, 2009-04-01 at 11:42 +0200, Geert Uytterhoeven wrote:
> > > > PPC_CELL_NATIVE selects PPC_OF_PLATFORM_PCI, but not the underlying PCI,
> > > > causing build failures if PCI is not set.
> > > 
> > > Maybe it should only select it if PCI is enabled ? Is qpace using PCI ?
> > 
> > No, QPACE does not have any PCI devices whatsoever.
> 
> so something like select PPC_OF_PLATFORM_PCI if PCI would work you
> think ?

I gave it a try. Patch below.
But that is still not sufficient:

| arch/powerpc/platforms/built-in.o:(.toc1+0x4e8): undefined reference to `pci_io_base'

due to arch/powerpc/platforms/cell/io-workarounds.c. I guess this file
shouldn't be built when CONFIG_PCI=n?

As I don't have the hardware to test anyway, I'll give up.


With kind regards,

Geert Uytterhoeven
Software Architect

Sony Techsoft Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium

Phone:    +32 (0)2 700 8453
Fax:      +32 (0)2 700 8622
E-mail:   Geert.Uytterhoeven@sonycom.com
Internet: http://www.sony-europe.com/

A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010

Comments

Arnd Bergmann April 2, 2009, 1:15 p.m. UTC | #1 
On Thursday 02 April 2009, Geert Uytterhoeven wrote:
> | arch/powerpc/platforms/built-in.o:(.toc1+0x4e8): undefined reference to `pci_io_base'
> 
> due to arch/powerpc/platforms/cell/io-workarounds.c. I guess this file
> shouldn't be built when CONFIG_PCI=n?

Right, the I/O workarounds are specific to the spider PCI implementation,
so there is no point in having them without PCI support.

> As I don't have the hardware to test anyway, I'll give up.

BenK, can you try Geert's patch on QPACE?

	Arnd <><
Benjamin Krill April 2, 2009, 1:58 p.m. UTC | #2 
* Arnd Bergmann | 2009-04-02 15:15:11 [+0200]:

>BenK, can you try Geert's patch on QPACE?

Successfully tested on QPACE.

Acked-by: Benjamin Krill <ben@codiert.org>
Paul Mackerras April 6, 2009, 6:11 a.m. UTC | #3 
Arnd Bergmann writes:

> On Thursday 02 April 2009, Geert Uytterhoeven wrote:
> > | arch/powerpc/platforms/built-in.o:(.toc1+0x4e8): undefined reference to `pci_io_base'
> > 
> > due to arch/powerpc/platforms/cell/io-workarounds.c. I guess this file
> > shouldn't be built when CONFIG_PCI=n?
> 
> Right, the I/O workarounds are specific to the spider PCI implementation,
> so there is no point in having them without PCI support.
> 
> > As I don't have the hardware to test anyway, I'll give up.
> 
> BenK, can you try Geert's patch on QPACE?

So is that patch good or not?  If it's good, could someone please
repost it with a proper patch description etc.?

Thanks,
Paul.
Geert Uytterhoeven April 6, 2009, 7:34 a.m. UTC | #4 
On Mon, 6 Apr 2009, Paul Mackerras wrote:
> Arnd Bergmann writes:
> > On Thursday 02 April 2009, Geert Uytterhoeven wrote:
> > > | arch/powerpc/platforms/built-in.o:(.toc1+0x4e8): undefined reference to `pci_io_base'
> > > 
> > > due to arch/powerpc/platforms/cell/io-workarounds.c. I guess this file
> > > shouldn't be built when CONFIG_PCI=n?
> > 
> > Right, the I/O workarounds are specific to the spider PCI implementation,
> > so there is no point in having them without PCI support.
> > 
> > > As I don't have the hardware to test anyway, I'll give up.
> > 
> > BenK, can you try Geert's patch on QPACE?
> 
> So is that patch good or not?  If it's good, could someone please
> repost it with a proper patch description etc.?

It's not good, as it still causes the link error above.

With kind regards,

Geert Uytterhoeven
Software Architect

Sony Techsoft Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium

Phone:    +32 (0)2 700 8453
Fax:      +32 (0)2 700 8622
E-mail:   Geert.Uytterhoeven@sonycom.com
Internet: http://www.sony-europe.com/

A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010
diff mbox

Patch

diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 40e24c3..fa604b1 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -13,7 +13,7 @@  config PPC_CELL_COMMON
 config PPC_CELL_NATIVE
 	bool
 	select PPC_CELL_COMMON
-	select PPC_OF_PLATFORM_PCI
+	select PPC_OF_PLATFORM_PCI if PCI
 	select MPIC
 	select IBM_NEW_EMAC_EMAC4
 	select IBM_NEW_EMAC_RGMII
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index 5930536..628b21f 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -81,6 +81,7 @@  static void cell_progress(char *s, unsigned short hex)
 	printk("*** %04x : %s\n", hex, s ? s : "");
 }
 
+#ifdef CONFIG_PCI
 static void cell_fixup_pcie_rootcomplex(struct pci_dev *dev)
 {
 	struct pci_controller *hose;
@@ -141,6 +142,7 @@  static int __devinit cell_setup_phb(struct pci_controller *phb)
 
 	return 0;
 }
+#endif /* CONFIG_PCI */
 
 static int __init cell_publish_devices(void)
 {
@@ -287,5 +289,7 @@  define_machine(cell) {
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= cell_progress,
 	.init_IRQ       	= cell_init_irq,
+#ifdef CONFIG_PCI
 	.pci_setup_phb		= cell_setup_phb,
+#endif
 };