@@ -404,6 +404,19 @@ config ARCH_EBSA110
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
+config ARCH_EFM32
+ bool "Energy Micro Cortex M3 Platform"
+ depends on !MMU
+ select ARM_NVIC
+ select CLKSRC_MMIO
+ select COMMON_CLK
+ select CPU_V7M
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select NO_DMA
+ select NO_IOPORT
+ select USE_OF
+
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_HAS_HOLES_MEMORYMODEL
@@ -1762,7 +1775,7 @@ config FORCE_MAX_ZONEORDER
int "Maximum zone order" if ARCH_SHMOBILE
range 11 64 if ARCH_SHMOBILE
default "12" if SOC_AM33XX
- default "9" if SA1111
+ default "9" if SA1111 || ARCH_EFM32
default "11"
help
The kernel memory allocator divides physically contiguous memory
@@ -167,6 +167,22 @@ choice
Say Y here if you want the debug print routines to direct
their output to the serial port in the DC21285 (Footbridge).
+ config DEBUG_EFM32_UART1
+ bool "Kernel low-level debugging messages via UART1 (ttyefm4)"
+ depends on ARCH_EFM32
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the second UART port on efm32 based
+ machines.
+
+ config DEBUG_EFM32_USART1
+ bool "Kernel low-level debugging messages via USART1 (ttyefm1)"
+ depends on ARCH_EFM32
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the second USART port on efm32 based
+ machines.
+
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
@@ -152,6 +152,7 @@ machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DOVE) += dove
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
+machine-$(CONFIG_ARCH_EFM32) += efm32
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_EXYNOS) += exynos
machine-$(CONFIG_ARCH_GEMINI) += gemini
@@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
dove-dove-db.dtb
+dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
new file mode 100644
@@ -0,0 +1,18 @@
+#include "skeleton.dtsi"
+
+/ {
+ nvic: nv-interrupt-controller@0xe0000000 {
+ compatible = "arm,armv7m-nvic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xe000e100 0xc00>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&nvic>;
+ ranges;
+ };
+};
new file mode 100644
@@ -0,0 +1,63 @@
+/dts-v1/;
+#include "efm32gg.dtsi"
+
+/ {
+ model = "Energy Micro Giant Gecko Development Kit";
+ compatible = "efm32,dk3750";
+
+ chosen {
+ bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
+ };
+
+ memory {
+ reg = <0x88000000 0x400000>;
+ };
+
+ soc {
+ adc@0x40002000 {
+ status = "ok";
+ };
+
+ spi0: spi@0x4000c000 { /* USART0 */
+ cs-gpios = <&gpio 68 1>; // E4
+ location = <1>;
+ status = "ok";
+
+ microsd@0 {
+ compatible = "mmc-spi-slot";
+ spi-max-frequency = <100000>;
+ voltage-ranges = <3200 3400>;
+ broken-cd;
+ reg = <0>;
+ };
+ };
+
+ spi1: spi@0x4000c400 { /* USART1 */
+ cs-gpios = <&gpio 51 1>; // D3
+ location = <1>;
+ status = "ok";
+
+ ks8851@0 {
+ compatible = "ks8851";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+ interrupt-parent = <&boardfpga>;
+ interrupts = <4>;
+ };
+ };
+
+ uart4: uart@0x4000e400 { /* UART1 */
+ location = <2>;
+ status = "ok";
+ };
+
+ boardfpga: boardfpga@0x80000000 {
+ compatible = "efm32board";
+ reg = <0x80000000 0x400>;
+ irq-gpios = <&gpio 64 1>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ status = "ok";
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,141 @@
+#include "armv7-m.dtsi"
+#include "dt-bindings/clock/efm32-cmu.h"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ };
+
+ soc {
+ adc: adc@0x40002000 {
+ compatible = "efm32,adc";
+ reg = <0x40002000 0x400>;
+ interrupts = <7>;
+ status = "disabled";
+ };
+
+ gpio: gpio@0x40006000 {
+ compatible = "efm32,gpio";
+ reg = <0x40006000 0x1000>;
+ interrupts = <1 11>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ clocks = <&cmu clk_HFPERCLKGPIO>;
+ status = "ok";
+ };
+
+ spi0: spi@0x4000c000 { /* USART0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "efm32,spi";
+ reg = <0x4000c000 0x400>;
+ interrupts = <3 4>;
+ clocks = <&cmu clk_HFPERCLKUSART0>;
+ status = "disabled";
+ };
+
+ spi1: spi@0x4000c400 { /* USART1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "efm32,spi";
+ reg = <0x4000c400 0x400>;
+ interrupts = <15 16>;
+ clocks = <&cmu clk_HFPERCLKUSART1>;
+ status = "disabled";
+ };
+
+ spi2: spi@40x4000c800 { /* USART2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "efm32,spi";
+ reg = <0x4000c800 0x400>;
+ interrupts = <18 19>;
+ clocks = <&cmu clk_HFPERCLKUSART2>;
+ status = "disabled";
+ };
+
+ uart0: uart@0x4000c000 { /* USART0 */
+ compatible = "efm32,uart";
+ reg = <0x4000c000 0x400>;
+ interrupts = <3 4>;
+ clocks = <&cmu clk_HFPERCLKUSART0>;
+ status = "disabled";
+ };
+
+ uart1: uart@0x4000c400 { /* USART1 */
+ compatible = "efm32,uart";
+ reg = <0x4000c400 0x400>;
+ interrupts = <15 16>;
+ clocks = <&cmu clk_HFPERCLKUSART1>;
+ status = "disabled";
+ };
+
+ uart2: uart@40x4000c800 { /* USART2 */
+ compatible = "efm32,uart";
+ reg = <0x4000c800 0x400>;
+ interrupts = <18 19>;
+ clocks = <&cmu clk_HFPERCLKUSART2>;
+ status = "disabled";
+ };
+
+ uart3: uart@0x4000e000 { /* UART0 */
+ compatible = "efm32,uart";
+ reg = <0x4000e000 0x400>;
+ interrupts = <20 21>;
+ clocks = <&cmu clk_HFPERCLKUART0>;
+ status = "disabled";
+ };
+
+ uart4: uart@0x4000e400 { /* UART1 */
+ compatible = "efm32,uart";
+ reg = <0x4000e400 0x400>;
+ interrupts = <22 23>;
+ clocks = <&cmu clk_HFPERCLKUART1>;
+ status = "disabled";
+ };
+
+ timer0: timer@40010000 {
+ compatible = "efm32,timer";
+ reg = <0x40010000 0x400>;
+ interrupts = <2>;
+ clocks = <&cmu clk_HFPERCLKTIMER0>;
+ };
+
+ timer1: timer@40010400 {
+ compatible = "efm32,timer";
+ reg = <0x40010400 0x400>;
+ interrupts = <12>;
+ clocks = <&cmu clk_HFPERCLKTIMER1>;
+ };
+
+ timer2: timer@40010800 {
+ compatible = "efm32,timer";
+ reg = <0x40010800 0x400>;
+ interrupts = <13>;
+ clocks = <&cmu clk_HFPERCLKTIMER2>;
+ };
+
+ timer3: timer@40010c00 {
+ compatible = "efm32,timer";
+ reg = <0x40010c00 0x400>;
+ interrupts = <14>;
+ clocks = <&cmu clk_HFPERCLKTIMER3>;
+ };
+
+ cmu: cmu@400c8000 {
+ compatible = "efm32gg,cmu";
+ reg = <0x400c8000 0x400>;
+ interrupts = <32>;
+ #clock-cells = <1>;
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,104 @@
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=12
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_UID16 is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLUB_CPU_PARTIAL is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_EFM32=y
+# CONFIG_KUSER_HELPERS is not set
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x88000000
+CONFIG_DRAM_SIZE=0x00400000
+CONFIG_FLASH_MEM_BASE=0x8c000000
+CONFIG_FLASH_SIZE=0x01000000
+CONFIG_PREEMPT=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_XIP_KERNEL=y
+CONFIG_XIP_PHYS_ADDR=0x8c000000
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_COREDUMP is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK_RO=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_UCLINUX=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+CONFIG_KS8851=y
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_EFM32_UART=y
+CONFIG_SERIAL_EFM32_UART_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_EFM32=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
new file mode 100644
@@ -0,0 +1 @@
+obj-y += dtmachine.o time.o
new file mode 100644
@@ -0,0 +1,2 @@
+# This file is still needed because we cannot select ARCH_MULTIPLATFORM (as it
+# depends on MMU) and then this file is sourced in arch/arm/boot/Makefile
new file mode 100644
@@ -0,0 +1,15 @@
+/*
+ * Register definition for efm32's CMU component
+ */
+
+#define CMU_OSCENCMD 0x20
+#define CMU_OSCENCMD_HFXOEN 0x00000004
+
+#define CMU_CMD 0x24
+#define CMU_CMD_HFCLKSEL_HFXO 0x00000002
+
+#define CMU_STATUS 0x2c
+#define CMU_STATUS_HFRCOSEL 0x00000400
+#define CMU_STATUS_HFXOSEL 0x00000800
+
+#define CMU_HFPERCLKEN0 0x44
new file mode 100644
@@ -0,0 +1 @@
+void efm32_timer_init(void);
new file mode 100644
@@ -0,0 +1,31 @@
+#include <linux/kernel.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/irqdomain.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/irqchip.h>
+
+#include <asm/v7m.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+
+static void __init efm32_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *const efm32gg_compat[] __initconst = {
+ "efm32,dk3750",
+ NULL
+};
+
+DT_MACHINE_START(EFM32DT, "EFM32 (Device Tree Support)")
+ .init_irq = irqchip_init,
+ .init_time = efm32_timer_init,
+ .init_machine = efm32_init,
+ .dt_compat = efm32gg_compat,
+ .restart = armv7m_restart,
+MACHINE_END
new file mode 100644
@@ -0,0 +1,48 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define UARTn_CMD 0x000c
+#define UARTn_CMD_TXEN 0x0004
+
+#define UARTn_STATUS 0x0010
+#define UARTn_STATUS_TXC 0x0020
+#define UARTn_STATUS_TXBL 0x0040
+
+#define UARTn_TXDATA 0x0034
+
+ .macro addruart, rx, tmp
+#if defined(CONFIG_DEBUG_EFM32_USART1)
+ ldr \rx, =(0x4000c400) /* USART1 */
+#elif defined(CONFIG_DEBUG_EFM32_UART1)
+ ldr \rx, =(0x4000e400) /* UART1 */
+#else
+#error "No debug port configured"
+#endif
+ /*
+ * enable TX. The driver might disable that to save energy. We
+ * don't care about disabling at the end as during debug power
+ * consumption isn't that important.
+ */
+ ldr \tmp, =(UARTn_CMD_TXEN)
+ str \tmp, [\rx, #UARTn_CMD]
+ .endm
+
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #UARTn_TXDATA]
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #UARTn_STATUS]
+ tst \rd, #UARTn_STATUS_TXBL
+ beq 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, UARTn_STATUS]
+ tst \rd, #UARTn_STATUS_TXC
+ bne 1001b
+ .endm
new file mode 100644
@@ -0,0 +1,5 @@
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
new file mode 100644
@@ -0,0 +1,6 @@
+#ifndef __MACH_IO_H__
+#define __MACH_IO_H__
+
+#define __mem_pci(a) (a)
+
+#endif /* __MACH_IO_H__ */
new file mode 100644
@@ -0,0 +1,6 @@
+#ifndef __MACH_IRQS_H__
+#define __MACH_IRQS_H__
+
+#define NR_IRQS 82
+
+#endif /* __MACH_IRQS_H__ */
new file mode 100644
@@ -0,0 +1,7 @@
+#ifndef __MACH_TIMEX_H__
+#define __MACH_TIMEX_H__
+
+/* just a bogus value */
+#define CLOCK_TICK_RATE 12345678
+
+#endif /* __MACH_TIMEX_H__ */
new file mode 100644
@@ -0,0 +1,261 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/clk/efm32.h>
+
+#include <asm/mach/time.h>
+
+#include "common.h"
+
+#define BASEADDR_TIMER(n) IOMEM(0x40010000 + (n) * 0x400)
+
+#define TIMERn_CTRL 0x00
+#define TIMERn_CTRL_PRESC(val) (((val) & 0xf) << 24)
+#define TIMERn_CTRL_PRESC_1024 TIMERn_CTRL_PRESC(10)
+#define TIMERn_CTRL_CLKSEL(val) (((val) & 0x3) << 16)
+#define TIMERn_CTRL_CLKSEL_PRESCHFPERCLK TIMERn_CTRL_CLKSEL(0)
+#define TIMERn_CTRL_OSMEN 0x00000010
+#define TIMERn_CTRL_MODE(val) (((val) & 0x3) << 0)
+#define TIMERn_CTRL_MODE_UP TIMERn_CTRL_MODE(0)
+#define TIMERn_CTRL_MODE_DOWN TIMERn_CTRL_MODE(1)
+
+#define TIMERn_CMD 0x04
+#define TIMERn_CMD_START 0x1
+#define TIMERn_CMD_STOP 0x2
+
+#define TIMERn_IEN 0x0c
+#define TIMERn_IF 0x10
+#define TIMERn_IFS 0x14
+#define TIMERn_IFC 0x18
+#define TIMERn_IRQ_UF 0x2
+#define TIMERn_IRQ_OF 0x1
+
+#define TIMERn_TOP 0x1c
+#define TIMERn_CNT 0x24
+
+#define TIMER_CLOCKSOURCE 0
+#define TIMER_CLOCKEVENT 1
+
+struct efm32_clock_event_ddata {
+ struct clock_event_device evtdev;
+ void __iomem *base;
+ unsigned periodic_top;
+};
+
+static void efm32_clock_event_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evtdev)
+{
+ struct efm32_clock_event_ddata *ddata =
+ container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+ writel_relaxed(ddata->periodic_top, ddata->base + TIMERn_TOP);
+ writel_relaxed(TIMERn_CTRL_PRESC_1024 |
+ TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
+ TIMERn_CTRL_MODE_DOWN,
+ ddata->base + TIMERn_CTRL);
+ writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+ writel_relaxed(TIMERn_CTRL_PRESC_1024 |
+ TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
+ TIMERn_CTRL_OSMEN |
+ TIMERn_CTRL_MODE_DOWN,
+ ddata->base + TIMERn_CTRL);
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+ break;
+
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static int efm32_clock_event_set_next_event(unsigned long evt,
+ struct clock_event_device *evtdev)
+{
+ struct efm32_clock_event_ddata *ddata =
+ container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
+
+ writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+ writel_relaxed(evt, ddata->base + TIMERn_CNT);
+ writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD);
+
+ return 0;
+}
+
+static irqreturn_t efm32_clock_event_handler(int irq, void *dev_id)
+{
+ struct efm32_clock_event_ddata *ddata = dev_id;
+
+ writel_relaxed(TIMERn_IRQ_UF, ddata->base + TIMERn_IFC);
+
+ ddata->evtdev.event_handler(&ddata->evtdev);
+
+ return IRQ_HANDLED;
+}
+
+static struct efm32_clock_event_ddata clock_event_ddata = {
+ .evtdev = {
+ .name = "efm32 clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_MODE_PERIODIC,
+ .set_mode = efm32_clock_event_set_mode,
+ .set_next_event = efm32_clock_event_set_next_event,
+ .rating = 200,
+ },
+};
+
+static struct irqaction efm32_clock_event_irq = {
+ .name = "efm32 clockevent",
+ .flags = IRQF_TIMER,
+ .handler = efm32_clock_event_handler,
+ .dev_id = &clock_event_ddata,
+};
+
+static int efm32_timer_clocksource_init(struct device_node *np)
+{
+ struct clk *clk;
+ void __iomem *base;
+ unsigned long rate;
+ int ret;
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clocksource\n");
+ ret = PTR_ERR(clk);
+ goto err_clk_get;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("failed to enable timer clock for clocksource\n");
+ goto err_clk_enable;
+ }
+ rate = clk_get_rate(clk);
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_err("failed to map registers for clocksource\n");
+ goto err_iomap;
+ }
+
+ writel_relaxed(TIMERn_CTRL_PRESC_1024 |
+ TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
+ TIMERn_CTRL_MODE_UP, base + TIMERn_CTRL);
+ writel_relaxed(TIMERn_CMD_START, base + TIMERn_CMD);
+
+ return clocksource_mmio_init(base + TIMERn_CNT,
+ "efm32 timer", rate / 1024, 200, 16,
+ clocksource_mmio_readl_up);
+
+ iounmap(base);
+err_iomap:
+
+ clk_disable_unprepare(clk);
+err_clk_enable:
+
+ clk_put(clk);
+err_clk_get:
+
+ return ret;
+}
+
+int __init efm32_clockevent_init(struct device_node *np)
+{
+ struct clk *clk;
+ void __iomem *base;
+ unsigned long rate;
+ int irq;
+ int ret;
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clock for clockevent\n");
+ ret = PTR_ERR(clk);
+ goto err_clk_get;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("failed to enable timer clock for clockevent\n");
+ goto err_clk_enable;
+ }
+ rate = clk_get_rate(clk);
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_err("failed to map registers for clockevent\n");
+ goto err_iomap;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ pr_err("failed to get irq\n");
+ goto err_get_irq;
+ }
+
+ writel_relaxed(TIMERn_IRQ_UF, base + TIMERn_IEN);
+
+ clock_event_ddata.base = base;
+ clock_event_ddata.periodic_top = DIV_ROUND_CLOSEST(rate, 1024 * HZ);
+
+ setup_irq(irq, &efm32_clock_event_irq);
+
+ clockevents_config_and_register(&clock_event_ddata.evtdev,
+ DIV_ROUND_CLOSEST(rate, 1024), 0xf, 0xffff);
+
+ return 0;
+
+err_get_irq:
+
+ iounmap(base);
+err_iomap:
+
+ clk_disable_unprepare(clk);
+err_clk_enable:
+
+ clk_put(clk);
+err_clk_get:
+
+ return ret;
+}
+
+void __init efm32_timer_init(void)
+{
+ struct device_node *np;
+
+ efm32gg_clk_init();
+
+ np = of_find_compatible_node(NULL, NULL, "efm32,timer");
+ if (!np) {
+ pr_err("failed to find timer node for clocksource\n");
+ return;
+ }
+
+ efm32_timer_clocksource_init(np);
+
+ np = of_find_compatible_node(np, NULL, "efm32,timer");
+ if (!np) {
+ pr_err("failed to find timer node for clock events\n");
+ return;
+ }
+
+ efm32_clockevent_init(np);
+
+ of_node_put(np);
+}
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- arch/arm/Kconfig | 15 +- arch/arm/Kconfig.debug | 16 ++ arch/arm/Makefile | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/armv7-m.dtsi | 18 ++ arch/arm/boot/dts/efm32gg-dk3750.dts | 63 ++++++ arch/arm/boot/dts/efm32gg.dtsi | 141 +++++++++++++ arch/arm/configs/efm32_defconfig | 104 ++++++++++ arch/arm/mach-efm32/Makefile | 1 + arch/arm/mach-efm32/Makefile.boot | 2 + arch/arm/mach-efm32/cmu.h | 15 ++ arch/arm/mach-efm32/common.h | 1 + arch/arm/mach-efm32/dtmachine.c | 31 +++ arch/arm/mach-efm32/include/mach/debug-macro.S | 48 +++++ arch/arm/mach-efm32/include/mach/entry-macro.S | 5 + arch/arm/mach-efm32/include/mach/io.h | 6 + arch/arm/mach-efm32/include/mach/irqs.h | 6 + arch/arm/mach-efm32/include/mach/timex.h | 7 + arch/arm/mach-efm32/time.c | 261 +++++++++++++++++++++++++ 19 files changed, 741 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/armv7-m.dtsi create mode 100644 arch/arm/boot/dts/efm32gg-dk3750.dts create mode 100644 arch/arm/boot/dts/efm32gg.dtsi create mode 100644 arch/arm/configs/efm32_defconfig create mode 100644 arch/arm/mach-efm32/Makefile create mode 100644 arch/arm/mach-efm32/Makefile.boot create mode 100644 arch/arm/mach-efm32/cmu.h create mode 100644 arch/arm/mach-efm32/common.h create mode 100644 arch/arm/mach-efm32/dtmachine.c create mode 100644 arch/arm/mach-efm32/include/mach/debug-macro.S create mode 100644 arch/arm/mach-efm32/include/mach/entry-macro.S create mode 100644 arch/arm/mach-efm32/include/mach/io.h create mode 100644 arch/arm/mach-efm32/include/mach/irqs.h create mode 100644 arch/arm/mach-efm32/include/mach/timex.h create mode 100644 arch/arm/mach-efm32/time.c