Message ID | 1375866343-2074-1-git-send-email-b35083@freescale.com |
---|---|
State | Accepted |
Headers | show |
Nice improvement of this series. There are some unnecessary blank lines in the definitions in 7/8 and 8/8, but otherwise: reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha On Wed, Aug 07, 2013 at 05:05:36PM +0800, Jingchang Lu wrote: > using struct representing the i2c clk{div, val} pair would > make the i2c_clk_div array more clear. > > Signed-off-by: Jingchang Lu <b35083@freescale.com> > --- > drivers/i2c/busses/i2c-imx.c | 20 +++++++++++++------- > 1 file changed, 13 insertions(+), 7 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c > index e242797..9167d43 100644 > --- a/drivers/i2c/busses/i2c-imx.c > +++ b/drivers/i2c/busses/i2c-imx.c > @@ -30,6 +30,8 @@ > * Copyright (C) 2007 RightHand Technologies, Inc. > * Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt> > * > + * Copyright 2013 Freescale Semiconductor, Inc. > + * > */ > > /** Includes ******************************************************************* > @@ -95,8 +97,12 @@ > * > * Duplicated divider values removed from list > */ > +struct imx_i2c_clk_pair { > + u16 div; > + u16 val; > +}; > > -static u16 __initdata i2c_clk_div[50][2] = { > +static struct imx_i2c_clk_pair __initdata i2c_clk_div[] = { > { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 }, > { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 }, > { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 }, > @@ -274,15 +280,15 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, > /* Divider value calculation */ > i2c_clk_rate = clk_get_rate(i2c_imx->clk); > div = (i2c_clk_rate + rate - 1) / rate; > - if (div < i2c_clk_div[0][0]) > + if (div < i2c_clk_div[0].div) > i = 0; > - else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0]) > + else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1].div) > i = ARRAY_SIZE(i2c_clk_div) - 1; > else > - for (i = 0; i2c_clk_div[i][0] < div; i++); > + for (i = 0; i2c_clk_div[i].div < div; i++); > > /* Store divider value */ > - i2c_imx->ifdr = i2c_clk_div[i][1]; > + i2c_imx->ifdr = i2c_clk_div[i].val; > > /* > * There dummy delay is calculated. > @@ -290,7 +296,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, > * This delay is used in I2C bus disable function > * to fix chip hardware bug. > */ > - i2c_imx->disable_delay = (500000U * i2c_clk_div[i][0] > + i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div > + (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2); > > /* dev_dbg() can't be used, because adapter is not yet registered */ > @@ -298,7 +304,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, > dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n", > __func__, i2c_clk_rate, div); > dev_dbg(&i2c_imx->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n", > - __func__, i2c_clk_div[i][1], i2c_clk_div[i][0]); > + __func__, i2c_clk_div[i].val, i2c_clk_div[i].div); > #endif > } > > -- > 1.8.0 > > >
> -----Original Message----- > From: Sascha Hauer [mailto:s.hauer@pengutronix.de] > Sent: Thursday, August 08, 2013 1:54 AM > To: Lu Jingchang-B35083 > Cc: wsa@the-dreams.de; shawn.guo@linaro.org; Estevam Fabio-R49496; linux- > i2c@vger.kernel.org; linux-arm-kernel@lists.infradead.org > Subject: Re: [PATCH 1/8] i2c: imx: use struct representing i2c clk{div, > val} pair > > Nice improvement of this series. > > There are some unnecessary blank lines in the definitions in 7/8 and 8/8, > but otherwise: > > reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> [Lu Jingchang-B35083] Thank you very much for your review. I leave one blank lines between definitions for readability, could you please help to comment the unnecessary blank lines on that patches so that I can remove them and send out the next version, thanks. Best Regards, Jingchang -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Aug 07, 2013 at 05:05:36PM +0800, Jingchang Lu wrote: > using struct representing the i2c clk{div, val} pair would > make the i2c_clk_div array more clear. > > Signed-off-by: Jingchang Lu <b35083@freescale.com> Applied series to for-next, thanks! Please use --cover-letter next time.
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index e242797..9167d43 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -30,6 +30,8 @@ * Copyright (C) 2007 RightHand Technologies, Inc. * Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt> * + * Copyright 2013 Freescale Semiconductor, Inc. + * */ /** Includes ******************************************************************* @@ -95,8 +97,12 @@ * * Duplicated divider values removed from list */ +struct imx_i2c_clk_pair { + u16 div; + u16 val; +}; -static u16 __initdata i2c_clk_div[50][2] = { +static struct imx_i2c_clk_pair __initdata i2c_clk_div[] = { { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 }, { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 }, { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 }, @@ -274,15 +280,15 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, /* Divider value calculation */ i2c_clk_rate = clk_get_rate(i2c_imx->clk); div = (i2c_clk_rate + rate - 1) / rate; - if (div < i2c_clk_div[0][0]) + if (div < i2c_clk_div[0].div) i = 0; - else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0]) + else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1].div) i = ARRAY_SIZE(i2c_clk_div) - 1; else - for (i = 0; i2c_clk_div[i][0] < div; i++); + for (i = 0; i2c_clk_div[i].div < div; i++); /* Store divider value */ - i2c_imx->ifdr = i2c_clk_div[i][1]; + i2c_imx->ifdr = i2c_clk_div[i].val; /* * There dummy delay is calculated. @@ -290,7 +296,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, * This delay is used in I2C bus disable function * to fix chip hardware bug. */ - i2c_imx->disable_delay = (500000U * i2c_clk_div[i][0] + i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div + (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2); /* dev_dbg() can't be used, because adapter is not yet registered */ @@ -298,7 +304,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n", __func__, i2c_clk_rate, div); dev_dbg(&i2c_imx->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n", - __func__, i2c_clk_div[i][1], i2c_clk_div[i][0]); + __func__, i2c_clk_div[i].val, i2c_clk_div[i].div); #endif }
using struct representing the i2c clk{div, val} pair would make the i2c_clk_div array more clear. Signed-off-by: Jingchang Lu <b35083@freescale.com> --- drivers/i2c/busses/i2c-imx.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-)