Message ID | e32d865b1013a1c88627d96d6b1659b84ee74505.1369115383.git.kibo@prevas.dk |
---|---|
State | Changes Requested |
Delegated to: | Esben Haabendal |
Headers | show |
Kim Bøndergaard <kibo@prevas.dk> writes: > --- > recipes/busybox/busybox-configure.inc | 2 ++ > recipes/busybox/busybox-install.inc | 25 +++++++++++++++++++++++++ > recipes/busybox/files/busybox-mdev | 8 ++------ > 3 files changed, 29 insertions(+), 6 deletions(-) > > diff --git a/recipes/busybox/busybox-configure.inc b/recipes/busybox/busybox-configure.inc > index 6caaf3e..0cfb779 100644 > --- a/recipes/busybox/busybox-configure.inc > +++ b/recipes/busybox/busybox-configure.inc > @@ -118,6 +118,8 @@ DEFAULT_USE_busybox_mdev_sysvinit_start = "10" > RECIPE_FLAGS += "busybox_mdev_splashutils_progress busybox_mdev_splashutils_msg" > SPLASHUTILS_INITSCRIPTS:>USE_busybox_mdev += " busybox_mdev" > DEFAULT_USE_busybox_mdev_splashutils_msg = "\"Starting Mdev\"" > +RECIPE_FLAGS += "busybox_mdev_dash_s" > +DEFAULT_USE_busybox_mdev_dash_s = "1" > > RECIPE_FLAGS += "busybox_klogd \ > busybox_klogd_sysvinit_start busybox_klogd_conlevel" > diff --git a/recipes/busybox/busybox-install.inc b/recipes/busybox/busybox-install.inc > index bfb0c11..9e4f78c 100644 > --- a/recipes/busybox/busybox-install.inc > +++ b/recipes/busybox/busybox-install.inc > @@ -135,3 +135,28 @@ do_install () { > sysvinit_install_script ${SRCDIR}/busybox-httpd > fi > } > + > +do_install[postfuncs] += "${BUSYBOX_INSTALL_POSTFUNCS}" > +BUSYBOX_INSTALL_POSTFUNCS = "" > +BUSYBOX_INSTALL_POSTFUNCS:>USE_busybox_mdev = " do_install_fix_mdev" > + > +python do_install_fix_mdev () { > + import os, fileinput > + path = d.get("D") > + os.chdir(path) > + sysconfdir=d.get("sysconfdir") > + for line in fileinput.FileInput("." + sysconfdir + "/init.d/busybox-mdev", inplace=1): > + if d.get("USE_busybox_mdev_dash_s"): > + line=line.replace("mdev_dash_s PLACEHOLDER_1", > + "# Create tmpfs for /dev\n" + > + "echo \"Creating tmpfs at /dev\"\n" + > + "mount -t tmpfs tmpfs /dev -o size=64k,mode=0755") > + line=line.replace("mdev_dash_s PLACEHOLDER_2", > + "# Populate /dev from /sys info\n" + > + "echo \"Populating /dev/ using mdev\"\n" + > + "$MDEV -s") > + else: > + line=line.replace("mdev_dash_s PLACEHOLDER_1", "") > + line=line.replace("mdev_dash_s PLACEHOLDER_2", "") > + print line, > +} > diff --git a/recipes/busybox/files/busybox-mdev b/recipes/busybox/files/busybox-mdev > index c068b94..5d307dd 100755 > --- a/recipes/busybox/files/busybox-mdev > +++ b/recipes/busybox/files/busybox-mdev > @@ -34,16 +34,12 @@ if mountpoint -q /dev/shm/; then > umount -l /dev/shm/ > fi > > -# Create tmpfs for /dev > -echo "Creating tmpfs at /dev" > -mount -t tmpfs tmpfs /dev -o size=64k,mode=0755 > +mdev_dash_s PLACEHOLDER_1 Don't we need to remove this line also if USE_busybox_mdev is off? > > # Register mdev as hotplug event helper > echo "$MDEV" > /proc/sys/kernel/hotplug > > -# Populate /dev from /sys info > -echo "Populating /dev using mdev" > -$MDEV -s > +mdev_dash_s PLACEHOLDER_2 Same here. > # Touch .udev to inform scripts that /dev needs no further setup > touch /dev/.udev Will you send a new version which properly handles USE_busybox_mdev off? /Esben
You are right. Wouldn't the best be to simply always add do_install_fix_mdev() to the postfunc list independent of the USE_busybox_mdev flag. Due to the fact that USE_busybox_mdev_dash_s defaults to 1 the resulting busybox-mdev files will be as it originally was. Don't you agree? _____________________________________ Kim Bøndergaard Poulsen Systems Architect Prevas A/S Hedeager 1 DK-8200 Århus N Central +45 87 43 80 70 Direct +45 51 54 39 61 kibo@prevas.dk www.prevas.dk > -----Original Message----- > From: Esben Haabendal [mailto:esben.haabendal@dev.prevas.dk] > Sent: 29. maj 2013 11:01 > To: Kim Bøndergaard Poulsen > Cc: dev@oe-lite.org > Subject: Re: [PATCH 1/1] busybox, mdev: Added option for disabling mdev -s > in sysv-init > > Kim Bøndergaard <kibo@prevas.dk> writes: > > > --- > > recipes/busybox/busybox-configure.inc | 2 ++ > > recipes/busybox/busybox-install.inc | 25 > +++++++++++++++++++++++++ > > recipes/busybox/files/busybox-mdev | 8 ++------ > > 3 files changed, 29 insertions(+), 6 deletions(-) > > > > diff --git a/recipes/busybox/busybox-configure.inc > > b/recipes/busybox/busybox-configure.inc > > index 6caaf3e..0cfb779 100644 > > --- a/recipes/busybox/busybox-configure.inc > > +++ b/recipes/busybox/busybox-configure.inc > > @@ -118,6 +118,8 @@ DEFAULT_USE_busybox_mdev_sysvinit_start = > "10" > > RECIPE_FLAGS += "busybox_mdev_splashutils_progress > busybox_mdev_splashutils_msg" > > SPLASHUTILS_INITSCRIPTS:>USE_busybox_mdev += " busybox_mdev" > > DEFAULT_USE_busybox_mdev_splashutils_msg = "\"Starting Mdev\"" > > +RECIPE_FLAGS += "busybox_mdev_dash_s" > > +DEFAULT_USE_busybox_mdev_dash_s = "1" > > > > RECIPE_FLAGS += "busybox_klogd \ > > busybox_klogd_sysvinit_start busybox_klogd_conlevel" > > diff --git a/recipes/busybox/busybox-install.inc > > b/recipes/busybox/busybox-install.inc > > index bfb0c11..9e4f78c 100644 > > --- a/recipes/busybox/busybox-install.inc > > +++ b/recipes/busybox/busybox-install.inc > > @@ -135,3 +135,28 @@ do_install () { > > sysvinit_install_script ${SRCDIR}/busybox-httpd > > fi > > } > > + > > +do_install[postfuncs] += "${BUSYBOX_INSTALL_POSTFUNCS}" > > +BUSYBOX_INSTALL_POSTFUNCS = "" > > +BUSYBOX_INSTALL_POSTFUNCS:>USE_busybox_mdev = " > do_install_fix_mdev" > > + > > +python do_install_fix_mdev () { > > + import os, fileinput > > + path = d.get("D") > > + os.chdir(path) > > + sysconfdir=d.get("sysconfdir") > > + for line in fileinput.FileInput("." + sysconfdir + > "/init.d/busybox-mdev", inplace=1): > > + if d.get("USE_busybox_mdev_dash_s"): > > + line=line.replace("mdev_dash_s > PLACEHOLDER_1", > > + "# Create tmpfs for > /dev\n" + > > + "echo \"Creating > tmpfs at /dev\"\n" + > > + "mount -t tmpfs > tmpfs /dev -o size=64k,mode=0755") > > + line=line.replace("mdev_dash_s > PLACEHOLDER_2", > > + "# Populate /dev > from /sys info\n" + > > + "echo \"Populating > /dev/ using mdev\"\n" + > > + "$MDEV -s") > > + else: > > + line=line.replace("mdev_dash_s > PLACEHOLDER_1", "") > > + line=line.replace("mdev_dash_s > PLACEHOLDER_2", "") > > + print line, > > +} > > diff --git a/recipes/busybox/files/busybox-mdev > > b/recipes/busybox/files/busybox-mdev > > index c068b94..5d307dd 100755 > > --- a/recipes/busybox/files/busybox-mdev > > +++ b/recipes/busybox/files/busybox-mdev > > @@ -34,16 +34,12 @@ if mountpoint -q /dev/shm/; then > > umount -l /dev/shm/ > > fi > > > > -# Create tmpfs for /dev > > -echo "Creating tmpfs at /dev" > > -mount -t tmpfs tmpfs /dev -o size=64k,mode=0755 > > +mdev_dash_s PLACEHOLDER_1 > > Don't we need to remove this line also if USE_busybox_mdev is off? > > > > > # Register mdev as hotplug event helper echo "$MDEV" > > > /proc/sys/kernel/hotplug > > > > -# Populate /dev from /sys info > > -echo "Populating /dev using mdev" > > -$MDEV -s > > +mdev_dash_s PLACEHOLDER_2 > > Same here. > > > # Touch .udev to inform scripts that /dev needs no further setup > > touch /dev/.udev > > Will you send a new version which properly handles USE_busybox_mdev off? > > /Esben
Kim Bøndergaard Poulsen <Kim.BondergaardPoulsen@prevas.dk> writes: > You are right. Wouldn't the best be to simply always add > do_install_fix_mdev() to the postfunc list independent of the > USE_busybox_mdev flag. > > Due to the fact that USE_busybox_mdev_dash_s defaults to 1 the > resulting busybox-mdev files will be as it originally was. Don't you > agree? That should work. Another solution would be to change the two placeholder lines to be comment lines. The 'else' clause in do_install_fix_mdev could then be dropped, and do_install_fix_mdev could then be changed to be run when USE_busybox_mdev_dash_s is enabled and not based on the value of USE_busybox_mdev. /Esben > > _____________________________________ > > Kim Bøndergaard Poulsen > Systems Architect > > Prevas A/S > Hedeager 1 > DK-8200 Århus N > > Central +45 87 43 80 70 > Direct +45 51 54 39 61 > kibo@prevas.dk > www.prevas.dk > > > >> -----Original Message----- >> From: Esben Haabendal [mailto:esben.haabendal@dev.prevas.dk] >> Sent: 29. maj 2013 11:01 >> To: Kim Bøndergaard Poulsen >> Cc: dev@oe-lite.org >> Subject: Re: [PATCH 1/1] busybox, mdev: Added option for disabling mdev -s >> in sysv-init >> >> Kim Bøndergaard <kibo@prevas.dk> writes: >> >> > --- >> > recipes/busybox/busybox-configure.inc | 2 ++ >> > recipes/busybox/busybox-install.inc | 25 >> +++++++++++++++++++++++++ >> > recipes/busybox/files/busybox-mdev | 8 ++------ >> > 3 files changed, 29 insertions(+), 6 deletions(-) >> > >> > diff --git a/recipes/busybox/busybox-configure.inc >> > b/recipes/busybox/busybox-configure.inc >> > index 6caaf3e..0cfb779 100644 >> > --- a/recipes/busybox/busybox-configure.inc >> > +++ b/recipes/busybox/busybox-configure.inc >> > @@ -118,6 +118,8 @@ DEFAULT_USE_busybox_mdev_sysvinit_start = >> "10" >> > RECIPE_FLAGS += "busybox_mdev_splashutils_progress >> busybox_mdev_splashutils_msg" >> > SPLASHUTILS_INITSCRIPTS:>USE_busybox_mdev += " busybox_mdev" >> > DEFAULT_USE_busybox_mdev_splashutils_msg = "\"Starting Mdev\"" >> > +RECIPE_FLAGS += "busybox_mdev_dash_s" >> > +DEFAULT_USE_busybox_mdev_dash_s = "1" >> > >> > RECIPE_FLAGS += "busybox_klogd \ >> > busybox_klogd_sysvinit_start busybox_klogd_conlevel" >> > diff --git a/recipes/busybox/busybox-install.inc >> > b/recipes/busybox/busybox-install.inc >> > index bfb0c11..9e4f78c 100644 >> > --- a/recipes/busybox/busybox-install.inc >> > +++ b/recipes/busybox/busybox-install.inc >> > @@ -135,3 +135,28 @@ do_install () { >> > sysvinit_install_script ${SRCDIR}/busybox-httpd >> > fi >> > } >> > + >> > +do_install[postfuncs] += "${BUSYBOX_INSTALL_POSTFUNCS}" >> > +BUSYBOX_INSTALL_POSTFUNCS = "" >> > +BUSYBOX_INSTALL_POSTFUNCS:>USE_busybox_mdev = " >> do_install_fix_mdev" >> > + >> > +python do_install_fix_mdev () { >> > + import os, fileinput >> > + path = d.get("D") >> > + os.chdir(path) >> > + sysconfdir=d.get("sysconfdir") >> > + for line in fileinput.FileInput("." + sysconfdir + >> "/init.d/busybox-mdev", inplace=1): >> > + if d.get("USE_busybox_mdev_dash_s"): >> > + line=line.replace("mdev_dash_s >> PLACEHOLDER_1", >> > + "# Create tmpfs for >> /dev\n" + >> > + "echo \"Creating >> tmpfs at /dev\"\n" + >> > + "mount -t tmpfs >> tmpfs /dev -o size=64k,mode=0755") >> > + line=line.replace("mdev_dash_s >> PLACEHOLDER_2", >> > + "# Populate /dev >> from /sys info\n" + >> > + "echo \"Populating >> /dev/ using mdev\"\n" + >> > + "$MDEV -s") >> > + else: >> > + line=line.replace("mdev_dash_s >> PLACEHOLDER_1", "") >> > + line=line.replace("mdev_dash_s >> PLACEHOLDER_2", "") >> > + print line, >> > +} >> > diff --git a/recipes/busybox/files/busybox-mdev >> > b/recipes/busybox/files/busybox-mdev >> > index c068b94..5d307dd 100755 >> > --- a/recipes/busybox/files/busybox-mdev >> > +++ b/recipes/busybox/files/busybox-mdev >> > @@ -34,16 +34,12 @@ if mountpoint -q /dev/shm/; then >> > umount -l /dev/shm/ >> > fi >> > >> > -# Create tmpfs for /dev >> > -echo "Creating tmpfs at /dev" >> > -mount -t tmpfs tmpfs /dev -o size=64k,mode=0755 >> > +mdev_dash_s PLACEHOLDER_1 >> >> Don't we need to remove this line also if USE_busybox_mdev is off? >> >> > >> > # Register mdev as hotplug event helper echo "$MDEV" > >> > /proc/sys/kernel/hotplug >> > >> > -# Populate /dev from /sys info >> > -echo "Populating /dev using mdev" >> > -$MDEV -s >> > +mdev_dash_s PLACEHOLDER_2 >> >> Same here. >> >> > # Touch .udev to inform scripts that /dev needs no further setup >> > touch /dev/.udev >> >> Will you send a new version which properly handles USE_busybox_mdev off? >> >> /Esben
After having looked into this again, I must say I prefer to stay at my last pushed commit If USE_busybox_mdev is off we doesn't get the file sysconfdir + "/init.d/busybox-mdev" at all, so trying to manipulate it makes no sense (but introduces errors)
Kim Bøndergaard Poulsen <Kim.BondergaardPoulsen@prevas.dk> writes: > After having looked into this again, I must say I prefer to stay at my last pushed commit > > If USE_busybox_mdev is off we doesn't get the file > > sysconfdir + "/init.d/busybox-mdev" > > at all, so trying to manipulate it makes no sense (but introduces > errors) And we don't want to introduce errors :) I just don't like the the trend that we are changing script source files to not be valid scripts anymore, and that, as in this situation, part of the script code is moved into Python code. It makes it more difficult to understand what the script does. Staying with the general idea of your commit e32d865b1013a1c88627d96d6b1659b84ee74505, but changing the files/busybox-mdev file to include the actual script code, but append the lines with '# USE_busybox_mdev_dash_s' and then change the inner part of do_install_fix_mdev() with something like this: if line.endswith("# USE_busybox_mdev_dash_s\n", 0, -1): if d.get("USE_busybox_mdev_dash_s"): line=line.replace("# USE_busybox_mdev_dash_s\n", "\n") else: continue So, run the do_install_fix_mdev when USE_busybox_mdev is enabled, and delete the 'mdev -s' related lines when USE_busybox_mdev_dash_s is disabled, and just strip the '# USE_busybox_mdev_dash_s' markup comment when USE_busybox_mdev_dash_s is enabled. The files/busybox-mdev diff would be something like: -# Create tmpfs for /dev -echo "Creating tmpfs at /dev" -mount -t tmpfs tmpfs /dev -o size=64k,mode=0755 +echo "Creating tmpfs at /dev"# USE_busybox_mdev_dash_s +mount -t tmpfs tmpfs /dev -o size=64k,mode=0755# USE_busybox_mdev_dash_s /Esben
diff --git a/recipes/busybox/busybox-configure.inc b/recipes/busybox/busybox-configure.inc index 6caaf3e..0cfb779 100644 --- a/recipes/busybox/busybox-configure.inc +++ b/recipes/busybox/busybox-configure.inc @@ -118,6 +118,8 @@ DEFAULT_USE_busybox_mdev_sysvinit_start = "10" RECIPE_FLAGS += "busybox_mdev_splashutils_progress busybox_mdev_splashutils_msg" SPLASHUTILS_INITSCRIPTS:>USE_busybox_mdev += " busybox_mdev" DEFAULT_USE_busybox_mdev_splashutils_msg = "\"Starting Mdev\"" +RECIPE_FLAGS += "busybox_mdev_dash_s" +DEFAULT_USE_busybox_mdev_dash_s = "1" RECIPE_FLAGS += "busybox_klogd \ busybox_klogd_sysvinit_start busybox_klogd_conlevel" diff --git a/recipes/busybox/busybox-install.inc b/recipes/busybox/busybox-install.inc index bfb0c11..9e4f78c 100644 --- a/recipes/busybox/busybox-install.inc +++ b/recipes/busybox/busybox-install.inc @@ -135,3 +135,28 @@ do_install () { sysvinit_install_script ${SRCDIR}/busybox-httpd fi } + +do_install[postfuncs] += "${BUSYBOX_INSTALL_POSTFUNCS}" +BUSYBOX_INSTALL_POSTFUNCS = "" +BUSYBOX_INSTALL_POSTFUNCS:>USE_busybox_mdev = " do_install_fix_mdev" + +python do_install_fix_mdev () { + import os, fileinput + path = d.get("D") + os.chdir(path) + sysconfdir=d.get("sysconfdir") + for line in fileinput.FileInput("." + sysconfdir + "/init.d/busybox-mdev", inplace=1): + if d.get("USE_busybox_mdev_dash_s"): + line=line.replace("mdev_dash_s PLACEHOLDER_1", + "# Create tmpfs for /dev\n" + + "echo \"Creating tmpfs at /dev\"\n" + + "mount -t tmpfs tmpfs /dev -o size=64k,mode=0755") + line=line.replace("mdev_dash_s PLACEHOLDER_2", + "# Populate /dev from /sys info\n" + + "echo \"Populating /dev/ using mdev\"\n" + + "$MDEV -s") + else: + line=line.replace("mdev_dash_s PLACEHOLDER_1", "") + line=line.replace("mdev_dash_s PLACEHOLDER_2", "") + print line, +} diff --git a/recipes/busybox/files/busybox-mdev b/recipes/busybox/files/busybox-mdev index c068b94..5d307dd 100755 --- a/recipes/busybox/files/busybox-mdev +++ b/recipes/busybox/files/busybox-mdev @@ -34,16 +34,12 @@ if mountpoint -q /dev/shm/; then umount -l /dev/shm/ fi -# Create tmpfs for /dev -echo "Creating tmpfs at /dev" -mount -t tmpfs tmpfs /dev -o size=64k,mode=0755 +mdev_dash_s PLACEHOLDER_1 # Register mdev as hotplug event helper echo "$MDEV" > /proc/sys/kernel/hotplug -# Populate /dev from /sys info -echo "Populating /dev using mdev" -$MDEV -s +mdev_dash_s PLACEHOLDER_2 # Touch .udev to inform scripts that /dev needs no further setup touch /dev/.udev