Message ID | 1369399534-30320-1-git-send-email-rajeshwari.s@samsung.com |
---|---|
State | Accepted |
Delegated to: | Minkyu Kang |
Headers | show |
On Fri, May 24, 2013 at 5:45 AM, Rajeshwari Shinde <rajeshwari.s@samsung.com > wrote: > Current DWMMC driver used to give FIFO underrun/overrun error every 3rd > time > for mmc rescan command. > In current code FIFO_DEPTH is getting calculated after reading the default > FIFOTH > register and extracting the RX_WMARK bits from it i.e (RX_WMARK = > FIFO_DEPTH/2 -1). > Instead of storing the correct value, we were recalculating the FIFO_DEPT > each > DEPTH > time which is not correct. > > Based on "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read > write issues" > http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/160247 > > Signed-off-by: Hatim Ali <hatim.rv@samsung.com> > Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> > Acked-by: Simon Glass <sjg@chromium.org> Tested on pit using 'mmc rescan' and saw no problems now. Tested-by: Simon Glass <sjg@chromium.org> > --- > Changes in V2: > - remove fifoth_val local variable > - Rebased on top of "[PATCH V9 3/9] DWMMC: Initialise dwmci and > resolve > EMMC read write issues". > drivers/mmc/dw_mmc.c | 14 ++++++-------- > 1 files changed, 6 insertions(+), 8 deletions(-) > > diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c > index 1307b12..5da20ed 100644 > --- a/drivers/mmc/dw_mmc.c > +++ b/drivers/mmc/dw_mmc.c > @@ -312,7 +312,7 @@ static void dwmci_set_ios(struct mmc *mmc) > static int dwmci_init(struct mmc *mmc) > { > struct dwmci_host *host = (struct dwmci_host *)mmc->priv; > - u32 fifo_size, fifoth_val; > + u32 fifo_size; > > dwmci_writel(host, DWMCI_PWREN, 1); > > @@ -332,15 +332,13 @@ static int dwmci_init(struct mmc *mmc) > dwmci_writel(host, DWMCI_IDINTEN, 0); > dwmci_writel(host, DWMCI_BMOD, 1); > > - fifo_size = dwmci_readl(host, DWMCI_FIFOTH); > - fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1; > - if (host->fifoth_val) { > - fifoth_val = host->fifoth_val; > - } else { > - fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) | > + if (!host->fifoth_val) { > + fifo_size = dwmci_readl(host, DWMCI_FIFOTH); > + fifo_size = ((fifo_size & RX_WMARK_MASK) >> > RX_WMARK_SHIFT) + 1; > + host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - > 1) | > TX_WMARK(fifo_size / 2); > } > - dwmci_writel(host, DWMCI_FIFOTH, fifoth_val); > + dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val); > > dwmci_writel(host, DWMCI_CLKENA, 0); > dwmci_writel(host, DWMCI_CLKSRC, 0); > -- > 1.7.4.4 > >
Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Thanks, Jaehoon Chung On 05/27/2013 05:32 AM, Simon Glass wrote: > On Fri, May 24, 2013 at 5:45 AM, Rajeshwari Shinde <rajeshwari.s@samsung.com <mailto:rajeshwari.s@samsung.com>> wrote: > > Current DWMMC driver used to give FIFO underrun/overrun error every 3rd time > for mmc rescan command. > In current code FIFO_DEPTH is getting calculated after reading the default FIFOTH > register and extracting the RX_WMARK bits from it i.e (RX_WMARK = FIFO_DEPTH/2 -1). > Instead of storing the correct value, we were recalculating the FIFO_DEPT each > > > DEPTH > > > time which is not correct. > > Based on "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues" > http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/160247 > > Signed-off-by: Hatim Ali <hatim.rv@samsung.com <mailto:hatim.rv@samsung.com>> > Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com <mailto:rajeshwari.s@samsung.com>> > > > Acked-by: Simon Glass <sjg@chromium.org <mailto:sjg@chromium.org>> > > Tested on pit using 'mmc rescan' and saw no problems now. > > Tested-by: Simon Glass <sjg@chromium.org <mailto:sjg@chromium.org>> > > > --- > Changes in V2: > - remove fifoth_val local variable > - Rebased on top of "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve > EMMC read write issues". > drivers/mmc/dw_mmc.c | 14 ++++++-------- > 1 files changed, 6 insertions(+), 8 deletions(-) > > diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c > index 1307b12..5da20ed 100644 > --- a/drivers/mmc/dw_mmc.c > +++ b/drivers/mmc/dw_mmc.c > @@ -312,7 +312,7 @@ static void dwmci_set_ios(struct mmc *mmc) > static int dwmci_init(struct mmc *mmc) > { > struct dwmci_host *host = (struct dwmci_host *)mmc->priv; > - u32 fifo_size, fifoth_val; > + u32 fifo_size; > > dwmci_writel(host, DWMCI_PWREN, 1); > > @@ -332,15 +332,13 @@ static int dwmci_init(struct mmc *mmc) > dwmci_writel(host, DWMCI_IDINTEN, 0); > dwmci_writel(host, DWMCI_BMOD, 1); > > - fifo_size = dwmci_readl(host, DWMCI_FIFOTH); > - fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1; > - if (host->fifoth_val) { > - fifoth_val = host->fifoth_val; > - } else { > - fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) | > + if (!host->fifoth_val) { > + fifo_size = dwmci_readl(host, DWMCI_FIFOTH); > + fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1; > + host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) | > TX_WMARK(fifo_size / 2); > } > - dwmci_writel(host, DWMCI_FIFOTH, fifoth_val); > + dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val); > > dwmci_writel(host, DWMCI_CLKENA, 0); > dwmci_writel(host, DWMCI_CLKSRC, 0); > -- > 1.7.4.4 > >
On Fri, May 24, 2013 at 06:15:34PM +0530, Rajeshwari Shinde wrote: > Current DWMMC driver used to give FIFO underrun/overrun error every 3rd time > for mmc rescan command. > In current code FIFO_DEPTH is getting calculated after reading the default FIFOTH > register and extracting the RX_WMARK bits from it i.e (RX_WMARK = FIFO_DEPTH/2 -1). > Instead of storing the correct value, we were recalculating the FIFO_DEPT each > time which is not correct. > > Based on "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues" > http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/160247 > > Signed-off-by: Hatim Ali <hatim.rv@samsung.com> > Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> > Acked-by: Simon Glass <sjg@chromium.org> > Tested-by: Simon Glass <sjg@chromium.org> > Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Andy Fleming <afleming@freescale.com> Looks like the patch this is based on is already accepted, but not yet upstream, so I'm going to delegate the patch to Minkyu Kang
On 14/06/13 07:34, Andy Fleming wrote: > On Fri, May 24, 2013 at 06:15:34PM +0530, Rajeshwari Shinde wrote: >> Current DWMMC driver used to give FIFO underrun/overrun error every 3rd time >> for mmc rescan command. >> In current code FIFO_DEPTH is getting calculated after reading the default FIFOTH >> register and extracting the RX_WMARK bits from it i.e (RX_WMARK = FIFO_DEPTH/2 -1). >> Instead of storing the correct value, we were recalculating the FIFO_DEPT each >> time which is not correct. >> >> Based on "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues" >> http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/160247 >> >> Signed-off-by: Hatim Ali <hatim.rv@samsung.com> >> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> >> Acked-by: Simon Glass <sjg@chromium.org> >> Tested-by: Simon Glass <sjg@chromium.org> >> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> > > Acked-by: Andy Fleming <afleming@freescale.com> > > Looks like the patch this is based on is already accepted, but not yet > upstream, so I'm going to delegate the patch to Minkyu Kang > > > applied to u-boot-samsung. Thanks, Minkyu Kang.
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index 1307b12..5da20ed 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -312,7 +312,7 @@ static void dwmci_set_ios(struct mmc *mmc) static int dwmci_init(struct mmc *mmc) { struct dwmci_host *host = (struct dwmci_host *)mmc->priv; - u32 fifo_size, fifoth_val; + u32 fifo_size; dwmci_writel(host, DWMCI_PWREN, 1); @@ -332,15 +332,13 @@ static int dwmci_init(struct mmc *mmc) dwmci_writel(host, DWMCI_IDINTEN, 0); dwmci_writel(host, DWMCI_BMOD, 1); - fifo_size = dwmci_readl(host, DWMCI_FIFOTH); - fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1; - if (host->fifoth_val) { - fifoth_val = host->fifoth_val; - } else { - fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) | + if (!host->fifoth_val) { + fifo_size = dwmci_readl(host, DWMCI_FIFOTH); + fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1; + host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) | TX_WMARK(fifo_size / 2); } - dwmci_writel(host, DWMCI_FIFOTH, fifoth_val); + dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val); dwmci_writel(host, DWMCI_CLKENA, 0); dwmci_writel(host, DWMCI_CLKSRC, 0);