| Message ID | 3816648.2TVsTiMOWx@bender |
|---|---|
| State | New |
| Headers | show |
On 01/09/2013 08:56 PM, Florian Fainelli wrote: > This patch adds the DTS file to support the Marvell RD-A370-A1 > (Reference Design board) also known as RD-88F6710 board. It is almost > entirely similar to the DB-A370 board except that the first Ethernet PHY > is SGMII-wired and the second is a switch which is RGMII-wired. > > Signed-off-by: Florian Fainelli <florian@openwrt.org> Looks OK for me Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> > --- > Thomas, Clément, as support for other peripherals gets merged, I will update > this DTS file to reflect this. Thanks! > > Changes since v1: > - added missing entry in arch/arm/boot/dts/Makefile to actually build the DTB > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/armada-370-rd.dts | 61 +++++++++++++++++++++++++++++++++++ > 2 files changed, 62 insertions(+) > create mode 100644 arch/arm/boot/dts/armada-370-rd.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index b7246d6..7a75171 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ > msm8960-cdp.dtb > dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ > armada-370-mirabox.dtb \ > + armada-370-rd.dtb \ > armada-xp-db.dtb \ > armada-xp-openblocks-ax3-4.dtb > dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ > diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts > new file mode 100644 > index 0000000..d62dfac > --- /dev/null > +++ b/arch/arm/boot/dts/armada-370-rd.dts > @@ -0,0 +1,61 @@ > +/* > + * Device Tree file for Marvell Armada 370 Reference Design board > + * (RD-88F6710-A1) > + * > + * Copied from arch/arm/boot/dts/armada-370-db.dts > + * > + * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org> > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > + */ > + > +/dts-v1/; > +/include/ "armada-370.dtsi" > + > +/ { > + model = "Marvell Armada 370 Reference Design"; > + compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp"; > + > + chosen { > + bootargs = "console=ttyS0,115200 earlyprintk"; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x00000000 0x20000000>; /* 512 MB */ > + }; > + > + soc { > + serial@d0012000 { > + clock-frequency = <200000000>; > + status = "okay"; > + }; > + sata@d00a0000 { > + nr-ports = <2>; > + status = "okay"; > + }; > + > + mdio { > + phy0: ethernet-phy@0 { > + reg = <0>; > + }; > + > + phy1: ethernet-phy@1 { > + reg = <1>; > + }; > + }; > + > + ethernet@d0070000 { > + status = "okay"; > + phy = <&phy0>; > + phy-mode = "sgmii"; > + }; > + ethernet@d0074000 { > + status = "okay"; > + phy = <&phy1>; > + phy-mode = "rgmii-id"; > + }; > + }; > +}; >
On 01/09/2013 08:56 PM, Florian Fainelli wrote: > This patch adds the DTS file to support the Marvell RD-A370-A1 > (Reference Design board) also known as RD-88F6710 board. It is almost > entirely similar to the DB-A370 board except that the first Ethernet PHY > is SGMII-wired and the second is a switch which is RGMII-wired. > > Signed-off-by: Florian Fainelli <florian@openwrt.org> > --- > Thomas, Clément, as support for other peripherals gets merged, I will update > this DTS file to reflect this. Thanks! > > Changes since v1: > - added missing entry in arch/arm/boot/dts/Makefile to actually build the DTB > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/armada-370-rd.dts | 61 +++++++++++++++++++++++++++++++++++ > 2 files changed, 62 insertions(+) > create mode 100644 arch/arm/boot/dts/armada-370-rd.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index b7246d6..7a75171 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ > msm8960-cdp.dtb > dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ > armada-370-mirabox.dtb \ > + armada-370-rd.dtb \ > armada-xp-db.dtb \ > armada-xp-openblocks-ax3-4.dtb > dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ > diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts > new file mode 100644 > index 0000000..d62dfac > --- /dev/null > +++ b/arch/arm/boot/dts/armada-370-rd.dts > @@ -0,0 +1,61 @@ > +/* > + * Device Tree file for Marvell Armada 370 Reference Design board > + * (RD-88F6710-A1) > + * > + * Copied from arch/arm/boot/dts/armada-370-db.dts > + * > + * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org> > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > + */ > + > +/dts-v1/; > +/include/ "armada-370.dtsi" > + > +/ { > + model = "Marvell Armada 370 Reference Design"; > + compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp"; > + > + chosen { > + bootargs = "console=ttyS0,115200 earlyprintk"; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x00000000 0x20000000>; /* 512 MB */ Hi Florian, As you based your file on our (erroneous) dts, could you confirm that the RD-A370-A1 board have "only" 512MB? Thanks, > + }; > + > + soc { > + serial@d0012000 { > + clock-frequency = <200000000>; > + status = "okay"; > + }; > + sata@d00a0000 { > + nr-ports = <2>; > + status = "okay"; > + }; > + > + mdio { > + phy0: ethernet-phy@0 { > + reg = <0>; > + }; > + > + phy1: ethernet-phy@1 { > + reg = <1>; > + }; > + }; > + > + ethernet@d0070000 { > + status = "okay"; > + phy = <&phy0>; > + phy-mode = "sgmii"; > + }; > + ethernet@d0074000 { > + status = "okay"; > + phy = <&phy1>; > + phy-mode = "rgmii-id"; > + }; > + }; > +}; >
Hello Gregory, Le 01/10/13 13:51, Gregory CLEMENT a écrit : > + > + memory { > + device_type = "memory"; > + reg = <0x00000000 0x20000000>; /* 512 MB */ > Hi Florian, > > As you based your file on our (erroneous) dts, could you confirm that > the RD-A370-A1 board have "only" 512MB? Yes it only has 512MB of RAM, this is not a mistake. -- Florian
Thomas, Gregory, Le 01/09/13 20:56, Florian Fainelli a écrit : > This patch adds the DTS file to support the Marvell RD-A370-A1 > (Reference Design board) also known as RD-88F6710 board. It is almost > entirely similar to the DB-A370 board except that the first Ethernet PHY > is SGMII-wired and the second is a switch which is RGMII-wired. Who is going to take this patch? Since this is a new DTS file there are little chances it breaks anything, could it be taken for an upcoming 3.8-rc? Thanks. -- Florian
Florian, On 01/11/2013 03:45 PM, Florian Fainelli wrote: > Thomas, Gregory, > > Le 01/09/13 20:56, Florian Fainelli a écrit : >> This patch adds the DTS file to support the Marvell RD-A370-A1 >> (Reference Design board) also known as RD-88F6710 board. It is almost >> entirely similar to the DB-A370 board except that the first Ethernet PHY >> is SGMII-wired and the second is a switch which is RGMII-wired. > > Who is going to take this patch? Since this is a new DTS file there are > little chances it breaks anything, could it be taken for an upcoming 3.8-rc? It is Jason who takes care of gathering all the patches for mvebu. As it is not a fix for a bug but more a new "feature" (at least a support for a new board), I doubt that it could be part of 3.8-rc. But as far as I am concerned I am not against having this patch in 3.8-rc. Regards > > Thanks. > -- > Florian >
Florian, On Fri, Jan 11, 2013 at 03:45:04PM +0100, Florian Fainelli wrote: > Le 01/09/13 20:56, Florian Fainelli a écrit : > >This patch adds the DTS file to support the Marvell RD-A370-A1 > >(Reference Design board) also known as RD-88F6710 board. It is almost > >entirely similar to the DB-A370 board except that the first Ethernet PHY > >is SGMII-wired and the second is a switch which is RGMII-wired. > > Who is going to take this patch? Since this is a new DTS file there > are little chances it breaks anything, could it be taken for an > upcoming 3.8-rc? No, only fixes go in for the current -rc. It'll be included for v3.9, I have it in my queue. thx, Jason.
Le 11/01/2013 15:56, Jason Cooper a écrit : > Florian, > > On Fri, Jan 11, 2013 at 03:45:04PM +0100, Florian Fainelli wrote: >> Le 01/09/13 20:56, Florian Fainelli a écrit : >>> This patch adds the DTS file to support the Marvell RD-A370-A1 >>> (Reference Design board) also known as RD-88F6710 board. It is almost >>> entirely similar to the DB-A370 board except that the first Ethernet PHY >>> is SGMII-wired and the second is a switch which is RGMII-wired. >> >> Who is going to take this patch? Since this is a new DTS file there >> are little chances it breaks anything, could it be taken for an >> upcoming 3.8-rc? > > No, only fixes go in for the current -rc. It'll be included for v3.9, I > have it in my queue. Jason, I don't see this patch in the pull request you just sent for 3.9, should it be? Thanks! -- Florian
On Sun, Jan 13, 2013 at 08:40:29PM +0100, Florian Fainelli wrote: > Le 11/01/2013 15:56, Jason Cooper a écrit : > >Florian, > > > >On Fri, Jan 11, 2013 at 03:45:04PM +0100, Florian Fainelli wrote: > >>Le 01/09/13 20:56, Florian Fainelli a écrit : > >>>This patch adds the DTS file to support the Marvell RD-A370-A1 > >>>(Reference Design board) also known as RD-88F6710 board. It is almost > >>>entirely similar to the DB-A370 board except that the first Ethernet PHY > >>>is SGMII-wired and the second is a switch which is RGMII-wired. > >> > >>Who is going to take this patch? Since this is a new DTS file there > >>are little chances it breaks anything, could it be taken for an > >>upcoming 3.8-rc? > > > >No, only fixes go in for the current -rc. It'll be included for v3.9, I > >have it in my queue. > > Jason, I don't see this patch in the pull request you just sent for > 3.9, should it be? Thanks! Not yet, I'm working my though the holiday backlog chronologically. thx, Jason.
Le 01/13/13 21:12, Jason Cooper a écrit : > On Sun, Jan 13, 2013 at 08:40:29PM +0100, Florian Fainelli wrote: >> Le 11/01/2013 15:56, Jason Cooper a écrit : >>> Florian, >>> >>> On Fri, Jan 11, 2013 at 03:45:04PM +0100, Florian Fainelli wrote: >>>> Le 01/09/13 20:56, Florian Fainelli a écrit : >>>>> This patch adds the DTS file to support the Marvell RD-A370-A1 >>>>> (Reference Design board) also known as RD-88F6710 board. It is almost >>>>> entirely similar to the DB-A370 board except that the first Ethernet PHY >>>>> is SGMII-wired and the second is a switch which is RGMII-wired. >>>> Who is going to take this patch? Since this is a new DTS file there >>>> are little chances it breaks anything, could it be taken for an >>>> upcoming 3.8-rc? >>> No, only fixes go in for the current -rc. It'll be included for v3.9, I >>> have it in my queue. >> Jason, I don't see this patch in the pull request you just sent for >> 3.9, should it be? Thanks! > Not yet, I'm working my though the holiday backlog chronologically. Ok, then you might want to hold this one a little, so I add mvsdio bindings to this DTS file as well. Thanks! -- Florian
On Mon, Jan 14, 2013 at 03:47:32PM +0100, Florian Fainelli wrote: > This patch adds the DTS file to support the Marvell RD-A370-A1 > (Reference Design board) also known as RD-88F6710 board. It is almost > entirely similar to the DB-A370 except on the following points: > > - second Ethernet MAC is connected to a switch using RGMII > - it only has 512MB of physical RAM > - SDIO interface is enabled and working by default (no need for jumpers) > > Signed-off-by: Florian Fainelli <florian@openwrt.org> > --- > Jason, > > This is rebased against your mvebu/for-next branch, can you please drop v2 of > the previous patch and take this one instead? Thanks! > > Changes since v2: > - rebased against Jason's mvebu/for-next > - added SDIO bindings > - changed commit message a bit > > Changes since v1: > - added missing entry in arch/arm/boot/dts/Makefile to actually build the DTB > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/armada-370-rd.dts | 68 +++++++++++++++++++++++++++++++++++ > 2 files changed, 69 insertions(+) > create mode 100644 arch/arm/boot/dts/armada-370-rd.dts Applied to mvebu/dt thx, Jason.
On Wed, Jan 23, 2013 at 09:29:33AM -0500, Jason Cooper wrote: > On Mon, Jan 14, 2013 at 03:47:32PM +0100, Florian Fainelli wrote: > > This patch adds the DTS file to support the Marvell RD-A370-A1 > > (Reference Design board) also known as RD-88F6710 board. It is almost > > entirely similar to the DB-A370 except on the following points: > > > > - second Ethernet MAC is connected to a switch using RGMII > > - it only has 512MB of physical RAM > > - SDIO interface is enabled and working by default (no need for jumpers) > > > > Signed-off-by: Florian Fainelli <florian@openwrt.org> > > --- > > Jason, > > > > This is rebased against your mvebu/for-next branch, can you please drop v2 of > > the previous patch and take this one instead? Thanks! > > > > Changes since v2: > > - rebased against Jason's mvebu/for-next > > - added SDIO bindings > > - changed commit message a bit > > > > Changes since v1: > > - added missing entry in arch/arm/boot/dts/Makefile to actually build the DTB > > > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/armada-370-rd.dts | 68 +++++++++++++++++++++++++++++++++++ > > 2 files changed, 69 insertions(+) > > create mode 100644 arch/arm/boot/dts/armada-370-rd.dts > > Applied to mvebu/dt oops, I meant mvebu/boards. thx, Jason.
Florian, On Mon, Jan 14, 2013 at 03:47:32PM +0100, Florian Fainelli wrote: > This patch adds the DTS file to support the Marvell RD-A370-A1 > (Reference Design board) also known as RD-88F6710 board. It is almost > entirely similar to the DB-A370 except on the following points: > > - second Ethernet MAC is connected to a switch using RGMII > - it only has 512MB of physical RAM > - SDIO interface is enabled and working by default (no need for jumpers) > > Signed-off-by: Florian Fainelli <florian@openwrt.org> > --- > Jason, > > This is rebased against your mvebu/for-next branch, can you please drop v2 of > the previous patch and take this one instead? Thanks! > > Changes since v2: > - rebased against Jason's mvebu/for-next > - added SDIO bindings > - changed commit message a bit This breaks badly as sdio bindings aren't added until mvebu/dt. Since this is a new board, it goes in *before* mvebu/dt (mvebu/boards). I'm going to go ahead and pull v2 instead as there seems to be no significant difference other than mvsdio being added. If you want to get sdio support in for v3.9, please submit a separate patch on top of your v2. thx, Jason. > > Changes since v1: > - added missing entry in arch/arm/boot/dts/Makefile to actually build the DTB > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/armada-370-rd.dts | 68 +++++++++++++++++++++++++++++++++++ > 2 files changed, 69 insertions(+) > create mode 100644 arch/arm/boot/dts/armada-370-rd.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index b7246d6..7a75171 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ > msm8960-cdp.dtb > dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ > armada-370-mirabox.dtb \ > + armada-370-rd.dtb \ > armada-xp-db.dtb \ > armada-xp-openblocks-ax3-4.dtb > dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ > diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts > new file mode 100644 > index 0000000..f8e4855 > --- /dev/null > +++ b/arch/arm/boot/dts/armada-370-rd.dts > @@ -0,0 +1,68 @@ > +/* > + * Device Tree file for Marvell Armada 370 Reference Design board > + * (RD-88F6710-A1) > + * > + * Copied from arch/arm/boot/dts/armada-370-db.dts > + * > + * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org> > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > + */ > + > +/dts-v1/; > +/include/ "armada-370.dtsi" > + > +/ { > + model = "Marvell Armada 370 Reference Design"; > + compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp"; > + > + chosen { > + bootargs = "console=ttyS0,115200 earlyprintk"; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x00000000 0x20000000>; /* 512 MB */ > + }; > + > + soc { > + serial@d0012000 { > + clock-frequency = <200000000>; > + status = "okay"; > + }; > + sata@d00a0000 { > + nr-ports = <2>; > + status = "okay"; > + }; > + > + mdio { > + phy0: ethernet-phy@0 { > + reg = <0>; > + }; > + > + phy1: ethernet-phy@1 { > + reg = <1>; > + }; > + }; > + > + ethernet@d0070000 { > + status = "okay"; > + phy = <&phy0>; > + phy-mode = "sgmii"; > + }; > + ethernet@d0074000 { > + status = "okay"; > + phy = <&phy1>; > + phy-mode = "rgmii-id"; > + }; > + > + mvsdio@d00d4000 { > + pinctrl-0 = <&sdio_pins1>; > + pinctrl-names = "default"; > + status = "okay"; > + /* No CD or WP GPIOs */ > + }; > + }; > +}; > -- > 1.7.10.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Le 31/01/2013 18:57, Jason Cooper a écrit : > Florian, > > On Mon, Jan 14, 2013 at 03:47:32PM +0100, Florian Fainelli wrote: >> This patch adds the DTS file to support the Marvell RD-A370-A1 >> (Reference Design board) also known as RD-88F6710 board. It is almost >> entirely similar to the DB-A370 except on the following points: >> >> - second Ethernet MAC is connected to a switch using RGMII >> - it only has 512MB of physical RAM >> - SDIO interface is enabled and working by default (no need for jumpers) >> >> Signed-off-by: Florian Fainelli <florian@openwrt.org> >> --- >> Jason, >> >> This is rebased against your mvebu/for-next branch, can you please drop v2 of >> the previous patch and take this one instead? Thanks! >> >> Changes since v2: >> - rebased against Jason's mvebu/for-next >> - added SDIO bindings >> - changed commit message a bit > > This breaks badly as sdio bindings aren't added until mvebu/dt. Since > this is a new board, it goes in *before* mvebu/dt (mvebu/boards). I'm > going to go ahead and pull v2 instead as there seems to be no > significant difference other than mvsdio being added. Whoops, sounds like the right thing to do, thanks! > > If you want to get sdio support in for v3.9, please submit a separate > patch on top of your v2. Will do. -- Florian
On Fri, Feb 01, 2013 at 11:38:28AM +0100, Florian Fainelli wrote: > The Armada 370 Reference Design board has one SD card slot, directly > connected to the SDIO IP of the SoC, so we enable this IP. there are no > GPIOs for card-detect and write-protect so we do not specify any. > > Signed-off-by: Florian Fainelli <florian@openwrt.org> > --- > Jason, > > This is against your mvebu/dt branch > > arch/arm/boot/dts/armada-370-rd.dts | 7 +++++++ > 1 file changed, 7 insertions(+) Applied to mvebu/dt thx, Jason.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b7246d6..7a75171 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-370-mirabox.dtb \ + armada-370-rd.dtb \ armada-xp-db.dtb \ armada-xp-openblocks-ax3-4.dtb dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts new file mode 100644 index 0000000..d62dfac --- /dev/null +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -0,0 +1,61 @@ +/* + * Device Tree file for Marvell Armada 370 Reference Design board + * (RD-88F6710-A1) + * + * Copied from arch/arm/boot/dts/armada-370-db.dts + * + * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "armada-370.dtsi" + +/ { + model = "Marvell Armada 370 Reference Design"; + compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + serial@d0012000 { + clock-frequency = <200000000>; + status = "okay"; + }; + sata@d00a0000 { + nr-ports = <2>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet@d0070000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; + }; + ethernet@d0074000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + }; +};
This patch adds the DTS file to support the Marvell RD-A370-A1 (Reference Design board) also known as RD-88F6710 board. It is almost entirely similar to the DB-A370 board except that the first Ethernet PHY is SGMII-wired and the second is a switch which is RGMII-wired. Signed-off-by: Florian Fainelli <florian@openwrt.org> --- Thomas, Clément, as support for other peripherals gets merged, I will update this DTS file to reflect this. Thanks! Changes since v1: - added missing entry in arch/arm/boot/dts/Makefile to actually build the DTB arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/armada-370-rd.dts | 61 +++++++++++++++++++++++++++++++++++ 2 files changed, 62 insertions(+) create mode 100644 arch/arm/boot/dts/armada-370-rd.dts