diff mbox

ARM i.MX6: Fix ethernet PLL clocks

Message ID 1353505652-28200-1-git-send-email-s.hauer@pengutronix.de
State New
Headers show

Commit Message

Sascha Hauer Nov. 21, 2012, 1:47 p.m. UTC 
In current code the ethernet PLL (according to code pll8, according to datasheet
pll6) is not handled correctly. The PLL runs at 500MHz and has different outputs.
Only the enet reference clock is implemented. This patch changes the PLL so that
it outputs 500MHz and adds the additional outputs as dividers. This now matches
the datasheet which says:

> This PLL synthesizes a low jitter clock from 24 MHz reference clock.
> The PLL outputs a 500 MHz clock. The reference clocks generated by this PLL are:
>  • Ref_PCIe = 125 MHz
>  • Ref_SATA = 100 MHz
>  • Ref_ethernet, which is configurable based on the PLL_ENET[1:0] register field.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../devicetree/bindings/clock/imx6q-clock.txt      |    5 ++
 arch/arm/mach-imx/clk-imx6q.c                      |   18 +++++-
 arch/arm/mach-imx/clk-pllv3.c                      |   59 +-------------------
 3 files changed, 24 insertions(+), 58 deletions(-)

Comments

Sascha Hauer Nov. 21, 2012, 2:11 p.m. UTC | #1 
On Wed, Nov 21, 2012 at 02:47:32PM +0100, Sascha Hauer wrote:
> In current code the ethernet PLL (according to code pll8, according to datasheet
> pll6) is not handled correctly. The PLL runs at 500MHz and has different outputs.
> Only the enet reference clock is implemented. This patch changes the PLL so that
> it outputs 500MHz and adds the additional outputs as dividers. This now matches
> the datasheet which says:
> 
> > This PLL synthesizes a low jitter clock from 24 MHz reference clock.
> > The PLL outputs a 500 MHz clock. The reference clocks generated by this PLL are:
> >  • Ref_PCIe = 125 MHz
> >  • Ref_SATA = 100 MHz
> >  • Ref_ethernet, which is configurable based on the PLL_ENET[1:0] register field.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../devicetree/bindings/clock/imx6q-clock.txt      |    5 ++
>  arch/arm/mach-imx/clk-imx6q.c                      |   18 +++++-
>  arch/arm/mach-imx/clk-pllv3.c                      |   59 +-------------------
>  3 files changed, 24 insertions(+), 58 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> index 492bd99..94311e2 100644
> --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> @@ -198,6 +198,11 @@ clocks and IDs.
>  	usbphy2			183
>  	ldb_di0_div_3_5		184
>  	ldb_di1_div_3_5		185
> +	sata_ref		186
> +	sata_ref_100m		187
> +	pcie_ref		188
> +	pcie_ref_125m		189
> +	enet_ref		190
>  
>  Examples:
>  
> diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> index 3ec242f..95f8ea5 100644
> --- a/arch/arm/mach-imx/clk-imx6q.c
> +++ b/arch/arm/mach-imx/clk-imx6q.c
> @@ -153,7 +153,7 @@ enum mx6q_clks {
>  	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
>  	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
>  	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
> -	clk_max
> +	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, clk_max
>  };
>  
>  static struct clk *clk[clk_max];
> @@ -163,6 +163,13 @@ static enum mx6q_clks const clks_init_on[] __initconst = {
>  	mmdc_ch0_axi, rom,
>  };
>  
> +static struct clk_div_table clk_enet_ref_table[] = {
> +	{ .val = 0, .div = 20, },
> +	{ .val = 1, .div = 10, },
> +	{ .val = 2, .div = 5, },
> +	{ .val = 3, .div = 4, },
> +};
> +
>  int __init mx6q_clocks_init(void)
>  {
>  	struct device_node *np;
> @@ -202,6 +209,15 @@ int __init mx6q_clocks_init(void)
>  	clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6);
>  	clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6);
>  
> +	clk[sata_ref] = imx_clk_gate("sata_ref", "pll8_enet", base + 0x20, 20);
> +	clk[pcie_ref] = imx_clk_gate("pcie_ref", "pll8_enet", base + 0x20, 19);
> +	clk[sata_ref_100m] = imx_clk_fixed_factor("sata_ref_100m", "sata_ref", 1, 5);
> +	clk[pcie_ref_125m] = imx_clk_fixed_factor("pcie_ref_100m", "pcie_ref", 1, 4);
> +
> +	clk[enet_ref] = clk_register_divider_table(NULL, "enet_ref", "pll8_enet", 0,
> +			base + 0x20, 0, 2, 0, clk_enet_ref_table,
> +			&imx_ccm_lock);
> +
>  	/*                                name              parent_name        reg       idx */
>  	clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
>  	clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus",     base + 0x100, 1);
> diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c
> index 36aac94..f5e210a 100644
> --- a/arch/arm/mach-imx/clk-pllv3.c
> +++ b/arch/arm/mach-imx/clk-pllv3.c
> @@ -287,66 +287,13 @@ static const struct clk_ops clk_pllv3_av_ops = {
>  static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
>  						unsigned long parent_rate)
>  {
> -	struct clk_pllv3 *pll = to_clk_pllv3(hw);
> -	u32 div = readl_relaxed(pll->base) & pll->div_mask;
> -
> -	switch (div) {
> -	case 0:
> -		return 25000000;
> -	case 1:
> -		return 50000000;
> -	case 2:
> -		return 100000000;
> -	case 3:
> -		return 125000000;
> -	}
> -
> -	return 0;
> +	return 500000000;
>  }
>  
>  static long clk_pllv3_enet_round_rate(struct clk_hw *hw, unsigned long rate,
>  				      unsigned long *prate)
>  {

This function should be removed completely. Will fix.

Sascha
Shawn Guo Nov. 22, 2012, 8:42 a.m. UTC | #2 
On Wed, Nov 21, 2012 at 02:47:32PM +0100, Sascha Hauer wrote:
> In current code the ethernet PLL (according to code pll8, according to datasheet
> pll6)

Yes, just checked the latest RM, it gets renumbered so.

> is not handled correctly. The PLL runs at 500MHz and has different outputs.
> Only the enet reference clock is implemented. This patch changes the PLL so that
> it outputs 500MHz and adds the additional outputs as dividers. This now matches
> the datasheet which says:
> 
> > This PLL synthesizes a low jitter clock from 24 MHz reference clock.
> > The PLL outputs a 500 MHz clock. The reference clocks generated by this PLL are:
> >  • Ref_PCIe = 125 MHz
> >  • Ref_SATA = 100 MHz
> >  • Ref_ethernet, which is configurable based on the PLL_ENET[1:0] register field.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  .../devicetree/bindings/clock/imx6q-clock.txt      |    5 ++
>  arch/arm/mach-imx/clk-imx6q.c                      |   18 +++++-
>  arch/arm/mach-imx/clk-pllv3.c                      |   59 +-------------------
>  3 files changed, 24 insertions(+), 58 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> index 492bd99..94311e2 100644
> --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> @@ -198,6 +198,11 @@ clocks and IDs.
>  	usbphy2			183
>  	ldb_di0_div_3_5		184
>  	ldb_di1_div_3_5		185
> +	sata_ref		186
> +	sata_ref_100m		187
> +	pcie_ref		188
> +	pcie_ref_125m		189
> +	enet_ref		190
>  
>  Examples:
>  
> diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> index 3ec242f..95f8ea5 100644
> --- a/arch/arm/mach-imx/clk-imx6q.c
> +++ b/arch/arm/mach-imx/clk-imx6q.c
> @@ -153,7 +153,7 @@ enum mx6q_clks {
>  	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
>  	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
>  	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
> -	clk_max
> +	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, clk_max

The clk_max was put on a separate line on purpose, so that you can add
new ones with + lines only.

>  };
>  
>  static struct clk *clk[clk_max];
> @@ -163,6 +163,13 @@ static enum mx6q_clks const clks_init_on[] __initconst = {
>  	mmdc_ch0_axi, rom,
>  };
>  
> +static struct clk_div_table clk_enet_ref_table[] = {
> +	{ .val = 0, .div = 20, },
> +	{ .val = 1, .div = 10, },
> +	{ .val = 2, .div = 5, },
> +	{ .val = 3, .div = 4, },
> +};
> +
>  int __init mx6q_clocks_init(void)
>  {
>  	struct device_node *np;
> @@ -202,6 +209,15 @@ int __init mx6q_clocks_init(void)
>  	clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6);
>  	clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6);
>  
> +	clk[sata_ref] = imx_clk_gate("sata_ref", "pll8_enet", base + 0x20, 20);
> +	clk[pcie_ref] = imx_clk_gate("pcie_ref", "pll8_enet", base + 0x20, 19);

Offset 0x20 for PLL_ENET?

> +	clk[sata_ref_100m] = imx_clk_fixed_factor("sata_ref_100m", "sata_ref", 1, 5);
> +	clk[pcie_ref_125m] = imx_clk_fixed_factor("pcie_ref_100m", "pcie_ref", 1, 4);

s/pcie_ref_100m/pcie_ref_125m

Also, don't we generally have divider/factor be parent of gate, do we?

> +
> +	clk[enet_ref] = clk_register_divider_table(NULL, "enet_ref", "pll8_enet", 0,
> +			base + 0x20, 0, 2, 0, clk_enet_ref_table,

Ditto on offset?

Shawn

> +			&imx_ccm_lock);
> +
>  	/*                                name              parent_name        reg       idx */
>  	clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
>  	clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus",     base + 0x100, 1);
> diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c
> index 36aac94..f5e210a 100644
> --- a/arch/arm/mach-imx/clk-pllv3.c
> +++ b/arch/arm/mach-imx/clk-pllv3.c
> @@ -287,66 +287,13 @@ static const struct clk_ops clk_pllv3_av_ops = {
>  static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
>  						unsigned long parent_rate)
>  {
> -	struct clk_pllv3 *pll = to_clk_pllv3(hw);
> -	u32 div = readl_relaxed(pll->base) & pll->div_mask;
> -
> -	switch (div) {
> -	case 0:
> -		return 25000000;
> -	case 1:
> -		return 50000000;
> -	case 2:
> -		return 100000000;
> -	case 3:
> -		return 125000000;
> -	}
> -
> -	return 0;
> +	return 500000000;
>  }
>  
>  static long clk_pllv3_enet_round_rate(struct clk_hw *hw, unsigned long rate,
>  				      unsigned long *prate)
>  {
> -	if (rate >= 125000000)
> -		rate = 125000000;
> -	else if (rate >= 100000000)
> -		rate = 100000000;
> -	else if (rate >= 50000000)
> -		rate = 50000000;
> -	else
> -		rate = 25000000;
> -	return rate;
> -}
> -
> -static int clk_pllv3_enet_set_rate(struct clk_hw *hw, unsigned long rate,
> -		unsigned long parent_rate)
> -{
> -	struct clk_pllv3 *pll = to_clk_pllv3(hw);
> -	u32 val, div;
> -
> -	switch (rate) {
> -	case 25000000:
> -		div = 0;
> -		break;
> -	case 50000000:
> -		div = 1;
> -		break;
> -	case 100000000:
> -		div = 2;
> -		break;
> -	case 125000000:
> -		div = 3;
> -		break;
> -	default:
> -		return -EINVAL;
> -	}
> -
> -	val = readl_relaxed(pll->base);
> -	val &= ~pll->div_mask;
> -	val |= div;
> -	writel_relaxed(val, pll->base);
> -
> -	return 0;
> +	return 500000000;
>  }
>  
>  static const struct clk_ops clk_pllv3_enet_ops = {
> @@ -355,8 +302,6 @@ static const struct clk_ops clk_pllv3_enet_ops = {
>  	.enable		= clk_pllv3_enable,
>  	.disable	= clk_pllv3_disable,
>  	.recalc_rate	= clk_pllv3_enet_recalc_rate,
> -	.round_rate	= clk_pllv3_enet_round_rate,
> -	.set_rate	= clk_pllv3_enet_set_rate,
>  };
>  
>  static const struct clk_ops clk_pllv3_mlb_ops = {
> -- 
> 1.7.10.4
>
Sascha Hauer Nov. 22, 2012, 8:47 a.m. UTC | #3 
On Thu, Nov 22, 2012 at 04:42:31PM +0800, Shawn Guo wrote:
> On Wed, Nov 21, 2012 at 02:47:32PM +0100, Sascha Hauer wrote:
> > In current code the ethernet PLL (according to code pll8, according to datasheet
> > pll6)
> 
> Yes, just checked the latest RM, it gets renumbered so.

So do we want to keep current code or change it according to the
datasheet?

> > diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> > index 3ec242f..95f8ea5 100644
> > --- a/arch/arm/mach-imx/clk-imx6q.c
> > +++ b/arch/arm/mach-imx/clk-imx6q.c
> > @@ -153,7 +153,7 @@ enum mx6q_clks {
> >  	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
> >  	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
> >  	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
> > -	clk_max
> > +	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, clk_max
> 
> The clk_max was put on a separate line on purpose, so that you can add
> new ones with + lines only.

Ok, will fix.

> 
> >  };
> >  
> >  static struct clk *clk[clk_max];
> > @@ -163,6 +163,13 @@ static enum mx6q_clks const clks_init_on[] __initconst = {
> >  	mmdc_ch0_axi, rom,
> >  };
> >  
> > +static struct clk_div_table clk_enet_ref_table[] = {
> > +	{ .val = 0, .div = 20, },
> > +	{ .val = 1, .div = 10, },
> > +	{ .val = 2, .div = 5, },
> > +	{ .val = 3, .div = 4, },
> > +};
> > +
> >  int __init mx6q_clocks_init(void)
> >  {
> >  	struct device_node *np;
> > @@ -202,6 +209,15 @@ int __init mx6q_clocks_init(void)
> >  	clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6);
> >  	clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6);
> >  
> > +	clk[sata_ref] = imx_clk_gate("sata_ref", "pll8_enet", base + 0x20, 20);
> > +	clk[pcie_ref] = imx_clk_gate("pcie_ref", "pll8_enet", base + 0x20, 19);
> 
> Offset 0x20 for PLL_ENET?

Indeed, that's wrong. It turned out that my sata disk only worked
because the enet pll had the enable bits for the sata clock in the
gate mask. Will fix that.

> 
> > +	clk[sata_ref_100m] = imx_clk_fixed_factor("sata_ref_100m", "sata_ref", 1, 5);
> > +	clk[pcie_ref_125m] = imx_clk_fixed_factor("pcie_ref_100m", "pcie_ref", 1, 4);
> 
> s/pcie_ref_100m/pcie_ref_125m

ok.

> 
> Also, don't we generally have divider/factor be parent of gate, do we?

Will change.

Sascha
Sascha Hauer Nov. 22, 2012, 8:54 a.m. UTC | #4 
On Thu, Nov 22, 2012 at 05:16:21PM +0800, Shawn Guo wrote:
> On Thu, Nov 22, 2012 at 09:47:07AM +0100, Sascha Hauer wrote:
> > On Thu, Nov 22, 2012 at 04:42:31PM +0800, Shawn Guo wrote:
> > > On Wed, Nov 21, 2012 at 02:47:32PM +0100, Sascha Hauer wrote:
> > > > In current code the ethernet PLL (according to code pll8, according to datasheet
> > > > pll6)
> > > 
> > > Yes, just checked the latest RM, it gets renumbered so.
> > 
> > So do we want to keep current code or change it according to the
> > datasheet?
> > 
> While you are there, yeah, let's make it match doc :)

Will do.

Sascha
Shawn Guo Nov. 22, 2012, 9:16 a.m. UTC | #5 
On Thu, Nov 22, 2012 at 09:47:07AM +0100, Sascha Hauer wrote:
> On Thu, Nov 22, 2012 at 04:42:31PM +0800, Shawn Guo wrote:
> > On Wed, Nov 21, 2012 at 02:47:32PM +0100, Sascha Hauer wrote:
> > > In current code the ethernet PLL (according to code pll8, according to datasheet
> > > pll6)
> > 
> > Yes, just checked the latest RM, it gets renumbered so.
> 
> So do we want to keep current code or change it according to the
> datasheet?
> 
While you are there, yeah, let's make it match doc :)

Shawn
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 492bd99..94311e2 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -198,6 +198,11 @@  clocks and IDs.
 	usbphy2			183
 	ldb_di0_div_3_5		184
 	ldb_di1_div_3_5		185
+	sata_ref		186
+	sata_ref_100m		187
+	pcie_ref		188
+	pcie_ref_125m		189
+	enet_ref		190
 
 Examples:
 
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 3ec242f..95f8ea5 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -153,7 +153,7 @@  enum mx6q_clks {
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
 	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
-	clk_max
+	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -163,6 +163,13 @@  static enum mx6q_clks const clks_init_on[] __initconst = {
 	mmdc_ch0_axi, rom,
 };
 
+static struct clk_div_table clk_enet_ref_table[] = {
+	{ .val = 0, .div = 20, },
+	{ .val = 1, .div = 10, },
+	{ .val = 2, .div = 5, },
+	{ .val = 3, .div = 4, },
+};
+
 int __init mx6q_clocks_init(void)
 {
 	struct device_node *np;
@@ -202,6 +209,15 @@  int __init mx6q_clocks_init(void)
 	clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6);
 	clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6);
 
+	clk[sata_ref] = imx_clk_gate("sata_ref", "pll8_enet", base + 0x20, 20);
+	clk[pcie_ref] = imx_clk_gate("pcie_ref", "pll8_enet", base + 0x20, 19);
+	clk[sata_ref_100m] = imx_clk_fixed_factor("sata_ref_100m", "sata_ref", 1, 5);
+	clk[pcie_ref_125m] = imx_clk_fixed_factor("pcie_ref_100m", "pcie_ref", 1, 4);
+
+	clk[enet_ref] = clk_register_divider_table(NULL, "enet_ref", "pll8_enet", 0,
+			base + 0x20, 0, 2, 0, clk_enet_ref_table,
+			&imx_ccm_lock);
+
 	/*                                name              parent_name        reg       idx */
 	clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
 	clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus",     base + 0x100, 1);
diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c
index 36aac94..f5e210a 100644
--- a/arch/arm/mach-imx/clk-pllv3.c
+++ b/arch/arm/mach-imx/clk-pllv3.c
@@ -287,66 +287,13 @@  static const struct clk_ops clk_pllv3_av_ops = {
 static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
 						unsigned long parent_rate)
 {
-	struct clk_pllv3 *pll = to_clk_pllv3(hw);
-	u32 div = readl_relaxed(pll->base) & pll->div_mask;
-
-	switch (div) {
-	case 0:
-		return 25000000;
-	case 1:
-		return 50000000;
-	case 2:
-		return 100000000;
-	case 3:
-		return 125000000;
-	}
-
-	return 0;
+	return 500000000;
 }
 
 static long clk_pllv3_enet_round_rate(struct clk_hw *hw, unsigned long rate,
 				      unsigned long *prate)
 {
-	if (rate >= 125000000)
-		rate = 125000000;
-	else if (rate >= 100000000)
-		rate = 100000000;
-	else if (rate >= 50000000)
-		rate = 50000000;
-	else
-		rate = 25000000;
-	return rate;
-}
-
-static int clk_pllv3_enet_set_rate(struct clk_hw *hw, unsigned long rate,
-		unsigned long parent_rate)
-{
-	struct clk_pllv3 *pll = to_clk_pllv3(hw);
-	u32 val, div;
-
-	switch (rate) {
-	case 25000000:
-		div = 0;
-		break;
-	case 50000000:
-		div = 1;
-		break;
-	case 100000000:
-		div = 2;
-		break;
-	case 125000000:
-		div = 3;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	val = readl_relaxed(pll->base);
-	val &= ~pll->div_mask;
-	val |= div;
-	writel_relaxed(val, pll->base);
-
-	return 0;
+	return 500000000;
 }
 
 static const struct clk_ops clk_pllv3_enet_ops = {
@@ -355,8 +302,6 @@  static const struct clk_ops clk_pllv3_enet_ops = {
 	.enable		= clk_pllv3_enable,
 	.disable	= clk_pllv3_disable,
 	.recalc_rate	= clk_pllv3_enet_recalc_rate,
-	.round_rate	= clk_pllv3_enet_round_rate,
-	.set_rate	= clk_pllv3_enet_set_rate,
 };
 
 static const struct clk_ops clk_pllv3_mlb_ops = {