diff mbox

[v4,2/2] mx2_camera: Fix regression caused by clock conversion

Message ID 1351598606-8485-2-git-send-email-fabio.estevam@freescale.com
State New
Headers show

Commit Message

Fabio Estevam Oct. 30, 2012, 12:03 p.m. UTC
Since mx27 transitioned to the commmon clock framework in 3.5, the correct way
to acquire the csi clock is to get csi_ahb and csi_per clocks separately.

By not doing so the camera sensor does not probe correctly:

soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
mx2-camera mx2-camera.0: Camera driver attached to camera 0
ov2640 0-0030: Product ID error fb:fb
mx2-camera mx2-camera.0: Camera driver detached from camera 0
mx2-camera mx2-camera.0: MX2 Camera (CSI) driver probed, clock frequency: 66500000

Adapt the mx2_camera driver to the new clock framework and make it functional
again.

Tested-by: Gaëtan Carlier <gcembed@gmail.com>
Tested-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v3:
- Drop unneeded clk_unprepare calls as pointed out by Guennadi
Changes since v2:
- Fix clock error handling code as pointed out by Russell King
Changes since v1:
- Rebased against linux-next 20121008.
 drivers/media/platform/soc_camera/mx2_camera.c |   39 ++++++++++++++++++------
 1 file changed, 29 insertions(+), 10 deletions(-)

Comments

Mauro Carvalho Chehab Oct. 31, 2012, 11:57 a.m. UTC | #1
Em Tue, 30 Oct 2012 10:03:26 -0200
Fabio Estevam <fabio.estevam@freescale.com> escreveu:

> Since mx27 transitioned to the commmon clock framework in 3.5, the correct way
> to acquire the csi clock is to get csi_ahb and csi_per clocks separately.
> 
> By not doing so the camera sensor does not probe correctly:
> 
> soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
> mx2-camera mx2-camera.0: Camera driver attached to camera 0
> ov2640 0-0030: Product ID error fb:fb
> mx2-camera mx2-camera.0: Camera driver detached from camera 0
> mx2-camera mx2-camera.0: MX2 Camera (CSI) driver probed, clock frequency: 66500000
> 
> Adapt the mx2_camera driver to the new clock framework and make it functional
> again.
> 
> Tested-by: Gaëtan Carlier <gcembed@gmail.com>
> Tested-by: Javier Martin <javier.martin@vista-silicon.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

As it seems that those patches depend on some patches at the arm tree,
the better is to merge them via -arm tree.

So,

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>

> ---
> Changes since v3:
> - Drop unneeded clk_unprepare calls as pointed out by Guennadi
> Changes since v2:
> - Fix clock error handling code as pointed out by Russell King
> Changes since v1:
> - Rebased against linux-next 20121008.
>  drivers/media/platform/soc_camera/mx2_camera.c |   39 ++++++++++++++++++------
>  1 file changed, 29 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c
> index e575ae8..558f6a3 100644
> --- a/drivers/media/platform/soc_camera/mx2_camera.c
> +++ b/drivers/media/platform/soc_camera/mx2_camera.c
> @@ -278,7 +278,8 @@ struct mx2_camera_dev {
>  	struct device		*dev;
>  	struct soc_camera_host	soc_host;
>  	struct soc_camera_device *icd;
> -	struct clk		*clk_csi, *clk_emma_ahb, *clk_emma_ipg;
> +	struct clk		*clk_emma_ahb, *clk_emma_ipg;
> +	struct clk		*clk_csi_ahb, *clk_csi_per;
>  
>  	void __iomem		*base_csi, *base_emma;
>  
> @@ -464,7 +465,8 @@ static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev)
>  {
>  	unsigned long flags;
>  
> -	clk_disable_unprepare(pcdev->clk_csi);
> +	clk_disable_unprepare(pcdev->clk_csi_ahb);
> +	clk_disable_unprepare(pcdev->clk_csi_per);
>  	writel(0, pcdev->base_csi + CSICR1);
>  	if (is_imx27_camera(pcdev)) {
>  		writel(0, pcdev->base_emma + PRP_CNTL);
> @@ -492,10 +494,14 @@ static int mx2_camera_add_device(struct soc_camera_device *icd)
>  	if (pcdev->icd)
>  		return -EBUSY;
>  
> -	ret = clk_prepare_enable(pcdev->clk_csi);
> +	ret = clk_prepare_enable(pcdev->clk_csi_ahb);
>  	if (ret < 0)
>  		return ret;
>  
> +	ret = clk_prepare_enable(pcdev->clk_csi_per);
> +	if (ret < 0)
> +		goto exit_csi_ahb;
> +
>  	csicr1 = CSICR1_MCLKEN;
>  
>  	if (is_imx27_camera(pcdev))
> @@ -512,6 +518,11 @@ static int mx2_camera_add_device(struct soc_camera_device *icd)
>  		 icd->devnum);
>  
>  	return 0;
> +
> +exit_csi_ahb:
> +	clk_disable_unprepare(pcdev->clk_csi_ahb);
> +
> +	return ret;
>  }
>  
>  static void mx2_camera_remove_device(struct soc_camera_device *icd)
> @@ -1772,10 +1783,17 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev)
>  		break;
>  	}
>  
> -	pcdev->clk_csi = devm_clk_get(&pdev->dev, "ahb");
> -	if (IS_ERR(pcdev->clk_csi)) {
> -		dev_err(&pdev->dev, "Could not get csi clock\n");
> -		err = PTR_ERR(pcdev->clk_csi);
> +	pcdev->clk_csi_ahb = devm_clk_get(&pdev->dev, "ahb");
> +	if (IS_ERR(pcdev->clk_csi_ahb)) {
> +		dev_err(&pdev->dev, "Could not get csi ahb clock\n");
> +		err = PTR_ERR(pcdev->clk_csi_ahb);
> +		goto exit;
> +	}
> +
> +	pcdev->clk_csi_per = devm_clk_get(&pdev->dev, "per");
> +	if (IS_ERR(pcdev->clk_csi_per)) {
> +		dev_err(&pdev->dev, "Could not get csi per clock\n");
> +		err = PTR_ERR(pcdev->clk_csi_per);
>  		goto exit;
>  	}
>  
> @@ -1785,12 +1803,13 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev)
>  
>  		pcdev->platform_flags = pcdev->pdata->flags;
>  
> -		rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk * 2);
> +		rate = clk_round_rate(pcdev->clk_csi_per,
> +						pcdev->pdata->clk * 2);
>  		if (rate <= 0) {
>  			err = -ENODEV;
>  			goto exit;
>  		}
> -		err = clk_set_rate(pcdev->clk_csi, rate);
> +		err = clk_set_rate(pcdev->clk_csi_per, rate);
>  		if (err < 0)
>  			goto exit;
>  	}
> @@ -1848,7 +1867,7 @@ static int __devinit mx2_camera_probe(struct platform_device *pdev)
>  		goto exit_free_emma;
>  
>  	dev_info(&pdev->dev, "MX2 Camera (CSI) driver probed, clock frequency: %ld\n",
> -			clk_get_rate(pcdev->clk_csi));
> +			clk_get_rate(pcdev->clk_csi_per));
>  
>  	return 0;
>  




Cheers,
Mauro
Fabio Estevam Nov. 14, 2012, 6:22 p.m. UTC | #2
Hi Sascha,

On Wed, Oct 31, 2012 at 9:57 AM, Mauro Carvalho Chehab
<mchehab@infradead.org> wrote:

> As it seems that those patches depend on some patches at the arm tree,
> the better is to merge them via -arm tree.
>
> So,
>
> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Could you please apply this series via your tree?

Thanks,

Fabio Estevam
Sascha Hauer Nov. 14, 2012, 7:58 p.m. UTC | #3
On Wed, Nov 14, 2012 at 04:22:40PM -0200, Fabio Estevam wrote:
> Hi Sascha,
> 
> On Wed, Oct 31, 2012 at 9:57 AM, Mauro Carvalho Chehab
> <mchehab@infradead.org> wrote:
> 
> > As it seems that those patches depend on some patches at the arm tree,
> > the better is to merge them via -arm tree.
> >
> > So,
> >
> > Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
> 
> Could you please apply this series via your tree?

Sure, I already have this in my queue.

Sascha
diff mbox

Patch

diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c
index e575ae8..558f6a3 100644
--- a/drivers/media/platform/soc_camera/mx2_camera.c
+++ b/drivers/media/platform/soc_camera/mx2_camera.c
@@ -278,7 +278,8 @@  struct mx2_camera_dev {
 	struct device		*dev;
 	struct soc_camera_host	soc_host;
 	struct soc_camera_device *icd;
-	struct clk		*clk_csi, *clk_emma_ahb, *clk_emma_ipg;
+	struct clk		*clk_emma_ahb, *clk_emma_ipg;
+	struct clk		*clk_csi_ahb, *clk_csi_per;
 
 	void __iomem		*base_csi, *base_emma;
 
@@ -464,7 +465,8 @@  static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev)
 {
 	unsigned long flags;
 
-	clk_disable_unprepare(pcdev->clk_csi);
+	clk_disable_unprepare(pcdev->clk_csi_ahb);
+	clk_disable_unprepare(pcdev->clk_csi_per);
 	writel(0, pcdev->base_csi + CSICR1);
 	if (is_imx27_camera(pcdev)) {
 		writel(0, pcdev->base_emma + PRP_CNTL);
@@ -492,10 +494,14 @@  static int mx2_camera_add_device(struct soc_camera_device *icd)
 	if (pcdev->icd)
 		return -EBUSY;
 
-	ret = clk_prepare_enable(pcdev->clk_csi);
+	ret = clk_prepare_enable(pcdev->clk_csi_ahb);
 	if (ret < 0)
 		return ret;
 
+	ret = clk_prepare_enable(pcdev->clk_csi_per);
+	if (ret < 0)
+		goto exit_csi_ahb;
+
 	csicr1 = CSICR1_MCLKEN;
 
 	if (is_imx27_camera(pcdev))
@@ -512,6 +518,11 @@  static int mx2_camera_add_device(struct soc_camera_device *icd)
 		 icd->devnum);
 
 	return 0;
+
+exit_csi_ahb:
+	clk_disable_unprepare(pcdev->clk_csi_ahb);
+
+	return ret;
 }
 
 static void mx2_camera_remove_device(struct soc_camera_device *icd)
@@ -1772,10 +1783,17 @@  static int __devinit mx2_camera_probe(struct platform_device *pdev)
 		break;
 	}
 
-	pcdev->clk_csi = devm_clk_get(&pdev->dev, "ahb");
-	if (IS_ERR(pcdev->clk_csi)) {
-		dev_err(&pdev->dev, "Could not get csi clock\n");
-		err = PTR_ERR(pcdev->clk_csi);
+	pcdev->clk_csi_ahb = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(pcdev->clk_csi_ahb)) {
+		dev_err(&pdev->dev, "Could not get csi ahb clock\n");
+		err = PTR_ERR(pcdev->clk_csi_ahb);
+		goto exit;
+	}
+
+	pcdev->clk_csi_per = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(pcdev->clk_csi_per)) {
+		dev_err(&pdev->dev, "Could not get csi per clock\n");
+		err = PTR_ERR(pcdev->clk_csi_per);
 		goto exit;
 	}
 
@@ -1785,12 +1803,13 @@  static int __devinit mx2_camera_probe(struct platform_device *pdev)
 
 		pcdev->platform_flags = pcdev->pdata->flags;
 
-		rate = clk_round_rate(pcdev->clk_csi, pcdev->pdata->clk * 2);
+		rate = clk_round_rate(pcdev->clk_csi_per,
+						pcdev->pdata->clk * 2);
 		if (rate <= 0) {
 			err = -ENODEV;
 			goto exit;
 		}
-		err = clk_set_rate(pcdev->clk_csi, rate);
+		err = clk_set_rate(pcdev->clk_csi_per, rate);
 		if (err < 0)
 			goto exit;
 	}
@@ -1848,7 +1867,7 @@  static int __devinit mx2_camera_probe(struct platform_device *pdev)
 		goto exit_free_emma;
 
 	dev_info(&pdev->dev, "MX2 Camera (CSI) driver probed, clock frequency: %ld\n",
-			clk_get_rate(pcdev->clk_csi));
+			clk_get_rate(pcdev->clk_csi_per));
 
 	return 0;