Message ID | 1351500073-4351-7-git-send-email-gregory.hermant@calao-systems.com |
---|---|
State | Superseded |
Headers | show |
On Mon, Oct 29, 2012 at 9:41 AM, Gregory Hermant <gregory.hermant@calao-systems.com> wrote: > > Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com> > --- > ...an_patches_enable_cg2900_on_upstream_4.91.patch | 88 ++++++++++++++++++++ > 1 file changed, 88 insertions(+) > create mode 100644 package/bluez_utils/bluez_utils-4.101-debian_patches_enable_cg2900_on_upstream_4.91.patch > > diff --git a/package/bluez_utils/bluez_utils-4.101-debian_patches_enable_cg2900_on_upstream_4.91.patch b/package/bluez_utils/bluez_utils-4.101-debian_patches_enable_cg2900_on_upstream_4.91.patch > new file mode 100644 > index 0000000..02b84c4 > --- /dev/null > +++ b/package/bluez_utils/bluez_utils-4.101-debian_patches_enable_cg2900_on_upstream_4.91.patch > @@ -0,0 +1,88 @@ > +diff -Naupr bluez-4.91/tools/hciattach.c bluez-4.91.cg2900/tools/hciattach.c > +--- bluez-4.91/tools/hciattach.c 2010-11-30 15:50:48.000000000 +0100 > ++++ bluez-4.91.cg2900/tools/hciattach.c 2011-05-20 10:47:45.849685569 +0200 > +@@ -1066,6 +1066,11 @@ struct uart_t uart[] = { > + { "texasalt", 0x0000, 0x0000, HCI_UART_LL, 115200, 115200, > + FLOW_CTL, DISABLE_PM, NULL, texasalt, NULL }, > + > ++ /* ST-Ericsson CG2900 GPS FM Bluetooth combo controller */ > ++ { "cg2900", 0x0000, 0x0000, HCI_UART_STE, 115200, 115200, > ++ FLOW_CTL, DISABLE_PM, NULL, NULL }, > ++ > ++ > + /* ST Microelectronics minikits based on STLC2410/STLC2415 */ > + { "st", 0x0000, 0x0000, HCI_UART_H4, 57600, 115200, > + FLOW_CTL, DISABLE_PM, NULL, st }, > +@@ -1157,10 +1162,10 @@ static struct uart_t * get_by_type(char > + } > + > + /* Initialize UART driver */ > +-static int init_uart(char *dev, struct uart_t *u, int send_break, int raw) > ++static int init_uart(char *dev, struct uart_t *u, int send_break, int raw, int line_disc) > + { > + struct termios ti; > +- int fd, i; > ++ int fd; > + unsigned long flags = 0; > + > + if (raw) > +@@ -1217,8 +1222,7 @@ static int init_uart(char *dev, struct u > + } > + > + /* Set TTY to N_HCI line discipline */ > +- i = N_HCI; > +- if (ioctl(fd, TIOCSETD, &i) < 0) { > ++ if (ioctl(fd, TIOCSETD, &line_disc) < 0) { > + perror("Can't set line discipline"); > + return -1; > + } > +@@ -1243,7 +1247,7 @@ static void usage(void) > + { > + printf("hciattach - HCI UART driver initialization utility\n"); > + printf("Usage:\n"); > +- printf("\thciattach [-n] [-p] [-b] [-r] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow] [bdaddr]\n"); > ++ printf("\thciattach [-n] [-p] [-a line_disc_nr] [-b] [-r] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow] [bdaddr]\n"); > + printf("\thciattach -l\n"); > + } > + > +@@ -1252,6 +1256,7 @@ int main(int argc, char *argv[]) > + struct uart_t *u = NULL; > + int detach, printpid, raw, opt, i, n, ld, err; > + int to = 10; > ++ int line_disc = N_HCI; > + int init_speed = 0; > + int send_break = 0; > + pid_t pid; > +@@ -1264,8 +1269,11 @@ int main(int argc, char *argv[]) > + printpid = 0; > + raw = 0; > + > +- while ((opt=getopt(argc, argv, "bnpt:s:lr")) != EOF) { > ++ while ((opt=getopt(argc, argv, "bnpt:s:lra:")) != EOF) { > + switch(opt) { > ++ case 'a': > ++ line_disc = atoi(optarg); > ++ break; > + case 'b': > + send_break = 1; > + break; > +@@ -1381,7 +1389,7 @@ int main(int argc, char *argv[]) > + alarm(to); > + bcsp_max_retries = to; > + > +- n = init_uart(dev, u, send_break, raw); > ++ n = init_uart(dev, u, send_break, raw, line_disc); > + if (n < 0) { > + perror("Can't initialize device"); > + exit(1); > +diff -Naupr bluez-4.91/tools/hciattach.h bluez-4.91.cg2900/tools/hciattach.h > +--- bluez-4.91/tools/hciattach.h 2010-11-30 15:50:48.000000000 +0100 > ++++ bluez-4.91.cg2900/tools/hciattach.h 2011-05-20 10:47:48.199685573 +0200 > +@@ -39,6 +39,7 @@ > + #define HCI_UART_H4DS 3 > + #define HCI_UART_LL 4 > + #define HCI_UART_ATH3K 5 > ++#define HCI_UART_STE 6 > + > + #define HCI_UART_RAW_DEVICE 0 > + > -- > 1.7.9.5 > > _______________________________________________ > buildroot mailing list > buildroot@busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot have you sent this patch to the bt mailing list? Yegor
Hello Yegor, I don't know if this patch has been sent to the bt mailing list because i'm not in charge of this task. AFAIK linaro and STE are working on the DT support for the snowball but i don't know what is the status about bt. gregory Le 29/10/2012 10:43, Yegor Yefremov a écrit : > have you sent this patch to the bt mailing list? > > Yegor
diff --git a/package/bluez_utils/bluez_utils-4.101-debian_patches_enable_cg2900_on_upstream_4.91.patch b/package/bluez_utils/bluez_utils-4.101-debian_patches_enable_cg2900_on_upstream_4.91.patch new file mode 100644 index 0000000..02b84c4 --- /dev/null +++ b/package/bluez_utils/bluez_utils-4.101-debian_patches_enable_cg2900_on_upstream_4.91.patch @@ -0,0 +1,88 @@ +diff -Naupr bluez-4.91/tools/hciattach.c bluez-4.91.cg2900/tools/hciattach.c +--- bluez-4.91/tools/hciattach.c 2010-11-30 15:50:48.000000000 +0100 ++++ bluez-4.91.cg2900/tools/hciattach.c 2011-05-20 10:47:45.849685569 +0200 +@@ -1066,6 +1066,11 @@ struct uart_t uart[] = { + { "texasalt", 0x0000, 0x0000, HCI_UART_LL, 115200, 115200, + FLOW_CTL, DISABLE_PM, NULL, texasalt, NULL }, + ++ /* ST-Ericsson CG2900 GPS FM Bluetooth combo controller */ ++ { "cg2900", 0x0000, 0x0000, HCI_UART_STE, 115200, 115200, ++ FLOW_CTL, DISABLE_PM, NULL, NULL }, ++ ++ + /* ST Microelectronics minikits based on STLC2410/STLC2415 */ + { "st", 0x0000, 0x0000, HCI_UART_H4, 57600, 115200, + FLOW_CTL, DISABLE_PM, NULL, st }, +@@ -1157,10 +1162,10 @@ static struct uart_t * get_by_type(char + } + + /* Initialize UART driver */ +-static int init_uart(char *dev, struct uart_t *u, int send_break, int raw) ++static int init_uart(char *dev, struct uart_t *u, int send_break, int raw, int line_disc) + { + struct termios ti; +- int fd, i; ++ int fd; + unsigned long flags = 0; + + if (raw) +@@ -1217,8 +1222,7 @@ static int init_uart(char *dev, struct u + } + + /* Set TTY to N_HCI line discipline */ +- i = N_HCI; +- if (ioctl(fd, TIOCSETD, &i) < 0) { ++ if (ioctl(fd, TIOCSETD, &line_disc) < 0) { + perror("Can't set line discipline"); + return -1; + } +@@ -1243,7 +1247,7 @@ static void usage(void) + { + printf("hciattach - HCI UART driver initialization utility\n"); + printf("Usage:\n"); +- printf("\thciattach [-n] [-p] [-b] [-r] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow] [bdaddr]\n"); ++ printf("\thciattach [-n] [-p] [-a line_disc_nr] [-b] [-r] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow] [bdaddr]\n"); + printf("\thciattach -l\n"); + } + +@@ -1252,6 +1256,7 @@ int main(int argc, char *argv[]) + struct uart_t *u = NULL; + int detach, printpid, raw, opt, i, n, ld, err; + int to = 10; ++ int line_disc = N_HCI; + int init_speed = 0; + int send_break = 0; + pid_t pid; +@@ -1264,8 +1269,11 @@ int main(int argc, char *argv[]) + printpid = 0; + raw = 0; + +- while ((opt=getopt(argc, argv, "bnpt:s:lr")) != EOF) { ++ while ((opt=getopt(argc, argv, "bnpt:s:lra:")) != EOF) { + switch(opt) { ++ case 'a': ++ line_disc = atoi(optarg); ++ break; + case 'b': + send_break = 1; + break; +@@ -1381,7 +1389,7 @@ int main(int argc, char *argv[]) + alarm(to); + bcsp_max_retries = to; + +- n = init_uart(dev, u, send_break, raw); ++ n = init_uart(dev, u, send_break, raw, line_disc); + if (n < 0) { + perror("Can't initialize device"); + exit(1); +diff -Naupr bluez-4.91/tools/hciattach.h bluez-4.91.cg2900/tools/hciattach.h +--- bluez-4.91/tools/hciattach.h 2010-11-30 15:50:48.000000000 +0100 ++++ bluez-4.91.cg2900/tools/hciattach.h 2011-05-20 10:47:48.199685573 +0200 +@@ -39,6 +39,7 @@ + #define HCI_UART_H4DS 3 + #define HCI_UART_LL 4 + #define HCI_UART_ATH3K 5 ++#define HCI_UART_STE 6 + + #define HCI_UART_RAW_DEVICE 0 +
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com> --- ...an_patches_enable_cg2900_on_upstream_4.91.patch | 88 ++++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 package/bluez_utils/bluez_utils-4.101-debian_patches_enable_cg2900_on_upstream_4.91.patch