Message ID | 1281982778-15262-1-git-send-email-aldo.cedillo@ti.com |
---|---|
State | Deferred |
Delegated to: | Tom Rini |
Headers | show |
Dear Aldo Brett Cedillo Martinez, > Configures GPMC, adds macros to enable net commands, and adds proper > initialization to board_eth_init function. Tom, are you OK with applying this patch ? > I have a similar patch to enable ethernet in zoom3 after initial support > patch. > > Signed-off-by: Aldo Brett Cedillo Martinez <aldo.cedillo@ti.com> > --- > board/logicpd/zoom2/zoom2.c | 21 +++++++++++++++++++++ > include/configs/omap3_zoom2.h | 10 +++++++++- > 2 files changed, 30 insertions(+), 1 deletions(-) > > diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c > index e9f6625..54d3e9f 100644 > --- a/board/logicpd/zoom2/zoom2.c > +++ b/board/logicpd/zoom2/zoom2.c > @@ -60,6 +60,16 @@ static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = { > 0x1D0904C4, 0 > }; > > +/* Ethernet GPMC configuration */ > +static u32 gpmc_eth[GPMC_MAX_REG] = { > + NET_GPMC_CONFIG1, > + NET_GPMC_CONFIG2, > + NET_GPMC_CONFIG3, > + NET_GPMC_CONFIG4, > + NET_GPMC_CONFIG5, > + NET_GPMC_CONFIG6, 0 > +}; > + > /* Used to track the revision of the board */ > static zoom2_revision revision = ZOOM2_REVISION_UNKNOWN; > > @@ -130,6 +140,12 @@ int board_init (void) > enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[3], > SERIAL_TL16CP754C_BASE, GPMC_SIZE_16M); > > +#ifdef CONFIG_CMD_NET > + gpmc_config = gpmc_eth; > + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[7], > + CONFIG_SMC911X_BASE, GPMC_SIZE_16M); > +#endif /* (CONFIG_CMD_NET) */ > + > /* board id for Linux */ > gd->bd->bi_arch_number = MACH_TYPE_OMAP_ZOOM2; > /* boot param addr */ > @@ -186,6 +202,11 @@ int board_eth_init(bd_t *bis) > #ifdef CONFIG_LAN91C96 > rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); > #endif > + > +#ifdef CONFIG_SMC911X > + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); > +#endif > + > return rc; > } > #endif > diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h > index eef95fe..c66d571 100644 > --- a/include/configs/omap3_zoom2.h > +++ b/include/configs/omap3_zoom2.h > @@ -154,7 +154,7 @@ > #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ > #undef CONFIG_CMD_IMI /* iminfo */ > #undef CONFIG_CMD_IMLS /* List all found images */ > -#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ > +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ > #undef CONFIG_CMD_NFS /* NFS support */ > > #define CONFIG_SYS_NO_FLASH > @@ -165,6 +165,14 @@ > #define CONFIG_SYS_I2C_BUS_SELECT 1 > #define CONFIG_DRIVER_OMAP34XX_I2C 1 > > +/* Ethernet */ > +#ifdef CONFIG_CMD_NET > +#define CONFIG_NET_MULTI > +#define CONFIG_SMC911X > +#define CONFIG_SMC911X_32_BIT > +#define CONFIG_SMC911X_BASE 0x2C000000 > +#endif /* (CONFIG_CMD_NET) */ > + > /* > * TWL4030 > */ Best regards, Marek Vasut
On Sat, Mar 31, 2012 at 12:45 PM, Marek Vasut <marek.vasut@gmail.com> wrote: > Dear Aldo Brett Cedillo Martinez, > >> Configures GPMC, adds macros to enable net commands, and adds proper >> initialization to board_eth_init function. > > Tom, are you OK with applying this patch ? To be clear, lets ask Tom Rix, currently listed maintainer (this is http://patchwork.ozlabs.org/patch/71816/) >> I have a similar patch to enable ethernet in zoom3 after initial support >> patch. >> >> Signed-off-by: Aldo Brett Cedillo Martinez <aldo.cedillo@ti.com> >> --- >> board/logicpd/zoom2/zoom2.c | 21 +++++++++++++++++++++ >> include/configs/omap3_zoom2.h | 10 +++++++++- >> 2 files changed, 30 insertions(+), 1 deletions(-) >> >> diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c >> index e9f6625..54d3e9f 100644 >> --- a/board/logicpd/zoom2/zoom2.c >> +++ b/board/logicpd/zoom2/zoom2.c >> @@ -60,6 +60,16 @@ static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = { >> 0x1D0904C4, 0 >> }; >> >> +/* Ethernet GPMC configuration */ >> +static u32 gpmc_eth[GPMC_MAX_REG] = { >> + NET_GPMC_CONFIG1, >> + NET_GPMC_CONFIG2, >> + NET_GPMC_CONFIG3, >> + NET_GPMC_CONFIG4, >> + NET_GPMC_CONFIG5, >> + NET_GPMC_CONFIG6, 0 >> +}; >> + >> /* Used to track the revision of the board */ >> static zoom2_revision revision = ZOOM2_REVISION_UNKNOWN; >> >> @@ -130,6 +140,12 @@ int board_init (void) >> enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[3], >> SERIAL_TL16CP754C_BASE, GPMC_SIZE_16M); >> >> +#ifdef CONFIG_CMD_NET >> + gpmc_config = gpmc_eth; >> + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[7], >> + CONFIG_SMC911X_BASE, GPMC_SIZE_16M); >> +#endif /* (CONFIG_CMD_NET) */ >> + >> /* board id for Linux */ >> gd->bd->bi_arch_number = MACH_TYPE_OMAP_ZOOM2; >> /* boot param addr */ >> @@ -186,6 +202,11 @@ int board_eth_init(bd_t *bis) >> #ifdef CONFIG_LAN91C96 >> rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); >> #endif >> + >> +#ifdef CONFIG_SMC911X >> + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); >> +#endif >> + >> return rc; >> } >> #endif >> diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h >> index eef95fe..c66d571 100644 >> --- a/include/configs/omap3_zoom2.h >> +++ b/include/configs/omap3_zoom2.h >> @@ -154,7 +154,7 @@ >> #undef CONFIG_CMD_FPGA /* FPGA configuration Support > */ >> #undef CONFIG_CMD_IMI /* iminfo > */ >> #undef CONFIG_CMD_IMLS /* List all found images > */ >> -#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot > */ >> +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot > */ >> #undef CONFIG_CMD_NFS /* NFS support > */ >> >> #define CONFIG_SYS_NO_FLASH >> @@ -165,6 +165,14 @@ >> #define CONFIG_SYS_I2C_BUS_SELECT 1 >> #define CONFIG_DRIVER_OMAP34XX_I2C 1 >> >> +/* Ethernet */ >> +#ifdef CONFIG_CMD_NET >> +#define CONFIG_NET_MULTI >> +#define CONFIG_SMC911X >> +#define CONFIG_SMC911X_32_BIT >> +#define CONFIG_SMC911X_BASE 0x2C000000 >> +#endif /* (CONFIG_CMD_NET) */ >> + >> /* >> * TWL4030 >> */ > > Best regards, > Marek Vasut > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot
Dear Tom Rini, > On Sat, Mar 31, 2012 at 12:45 PM, Marek Vasut <marek.vasut@gmail.com> wrote: > > Dear Aldo Brett Cedillo Martinez, > > > >> Configures GPMC, adds macros to enable net commands, and adds proper > >> initialization to board_eth_init function. > > > > Tom, are you OK with applying this patch ? > > To be clear, lets ask Tom Rix, currently listed maintainer (this is > http://patchwork.ozlabs.org/patch/71816/) I'll pick it and push via staging if it's ok with you. I want to have this out of my mane ;-) > >> I have a similar patch to enable ethernet in zoom3 after initial support > >> patch. > >> > >> Signed-off-by: Aldo Brett Cedillo Martinez <aldo.cedillo@ti.com> > >> --- > >> board/logicpd/zoom2/zoom2.c | 21 +++++++++++++++++++++ > >> include/configs/omap3_zoom2.h | 10 +++++++++- > >> 2 files changed, 30 insertions(+), 1 deletions(-) > >> > >> diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c > >> index e9f6625..54d3e9f 100644 > >> --- a/board/logicpd/zoom2/zoom2.c > >> +++ b/board/logicpd/zoom2/zoom2.c > >> @@ -60,6 +60,16 @@ static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = { > >> 0x1D0904C4, 0 > >> }; > >> > >> +/* Ethernet GPMC configuration */ > >> +static u32 gpmc_eth[GPMC_MAX_REG] = { > >> + NET_GPMC_CONFIG1, > >> + NET_GPMC_CONFIG2, > >> + NET_GPMC_CONFIG3, > >> + NET_GPMC_CONFIG4, > >> + NET_GPMC_CONFIG5, > >> + NET_GPMC_CONFIG6, 0 > >> +}; > >> + > >> /* Used to track the revision of the board */ > >> static zoom2_revision revision = ZOOM2_REVISION_UNKNOWN; > >> > >> @@ -130,6 +140,12 @@ int board_init (void) > >> enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[3], > >> SERIAL_TL16CP754C_BASE, GPMC_SIZE_16M); > >> > >> +#ifdef CONFIG_CMD_NET > >> + gpmc_config = gpmc_eth; > >> + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[7], > >> + CONFIG_SMC911X_BASE, GPMC_SIZE_16M); > >> +#endif /* (CONFIG_CMD_NET) */ > >> + > >> /* board id for Linux */ > >> gd->bd->bi_arch_number = MACH_TYPE_OMAP_ZOOM2; > >> /* boot param addr */ > >> @@ -186,6 +202,11 @@ int board_eth_init(bd_t *bis) > >> #ifdef CONFIG_LAN91C96 > >> rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); > >> #endif > >> + > >> +#ifdef CONFIG_SMC911X > >> + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); > >> +#endif > >> + > >> return rc; > >> } > >> #endif > >> diff --git a/include/configs/omap3_zoom2.h > >> b/include/configs/omap3_zoom2.h index eef95fe..c66d571 100644 > >> --- a/include/configs/omap3_zoom2.h > >> +++ b/include/configs/omap3_zoom2.h > >> @@ -154,7 +154,7 @@ > >> #undef CONFIG_CMD_FPGA /* FPGA configuration > >> Support > > > > */ > > > >> #undef CONFIG_CMD_IMI /* iminfo > > > > */ > > > >> #undef CONFIG_CMD_IMLS /* List all found images > > > > */ > > > >> -#undef CONFIG_CMD_NET /* bootp, tftpboot, > >> rarpboot > > > > */ > > > >> +#define CONFIG_CMD_NET /* bootp, tftpboot, > >> rarpboot > > > > */ > > > >> #undef CONFIG_CMD_NFS /* NFS support > > > > */ > > > >> #define CONFIG_SYS_NO_FLASH > >> @@ -165,6 +165,14 @@ > >> #define CONFIG_SYS_I2C_BUS_SELECT 1 > >> #define CONFIG_DRIVER_OMAP34XX_I2C 1 > >> > >> +/* Ethernet */ > >> +#ifdef CONFIG_CMD_NET > >> +#define CONFIG_NET_MULTI > >> +#define CONFIG_SMC911X > >> +#define CONFIG_SMC911X_32_BIT > >> +#define CONFIG_SMC911X_BASE 0x2C000000 > >> +#endif /* (CONFIG_CMD_NET) */ > >> + > >> /* > >> * TWL4030 > >> */ > > > > Best regards, > > Marek Vasut > > _______________________________________________ > > U-Boot mailing list > > U-Boot@lists.denx.de > > http://lists.denx.de/mailman/listinfo/u-boot
diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c index e9f6625..54d3e9f 100644 --- a/board/logicpd/zoom2/zoom2.c +++ b/board/logicpd/zoom2/zoom2.c @@ -60,6 +60,16 @@ static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = { 0x1D0904C4, 0 }; +/* Ethernet GPMC configuration */ +static u32 gpmc_eth[GPMC_MAX_REG] = { + NET_GPMC_CONFIG1, + NET_GPMC_CONFIG2, + NET_GPMC_CONFIG3, + NET_GPMC_CONFIG4, + NET_GPMC_CONFIG5, + NET_GPMC_CONFIG6, 0 +}; + /* Used to track the revision of the board */ static zoom2_revision revision = ZOOM2_REVISION_UNKNOWN; @@ -130,6 +140,12 @@ int board_init (void) enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[3], SERIAL_TL16CP754C_BASE, GPMC_SIZE_16M); +#ifdef CONFIG_CMD_NET + gpmc_config = gpmc_eth; + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[7], + CONFIG_SMC911X_BASE, GPMC_SIZE_16M); +#endif /* (CONFIG_CMD_NET) */ + /* board id for Linux */ gd->bd->bi_arch_number = MACH_TYPE_OMAP_ZOOM2; /* boot param addr */ @@ -186,6 +202,11 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_LAN91C96 rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); #endif + +#ifdef CONFIG_SMC911X + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif + return rc; } #endif diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index eef95fe..c66d571 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -154,7 +154,7 @@ #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ #undef CONFIG_CMD_IMI /* iminfo */ #undef CONFIG_CMD_IMLS /* List all found images */ -#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH @@ -165,6 +165,14 @@ #define CONFIG_SYS_I2C_BUS_SELECT 1 #define CONFIG_DRIVER_OMAP34XX_I2C 1 +/* Ethernet */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE 0x2C000000 +#endif /* (CONFIG_CMD_NET) */ + /* * TWL4030 */
Configures GPMC, adds macros to enable net commands, and adds proper initialization to board_eth_init function. I have a similar patch to enable ethernet in zoom3 after initial support patch. Signed-off-by: Aldo Brett Cedillo Martinez <aldo.cedillo@ti.com> --- board/logicpd/zoom2/zoom2.c | 21 +++++++++++++++++++++ include/configs/omap3_zoom2.h | 10 +++++++++- 2 files changed, 30 insertions(+), 1 deletions(-)