diff mbox

ARM: mxs_defconfig: Enable USB host

Message ID 1344186258-30841-1-git-send-email-festevam@gmail.com
State New
Headers show

Commit Message

Fabio Estevam Aug. 5, 2012, 5:04 p.m. UTC 
From: Fabio Estevam <fabio.estevam@freescale.com>

Enable USB host.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 arch/arm/configs/mxs_defconfig |   14 +++++++++++++-
 1 files changed, 13 insertions(+), 1 deletions(-)

Comments

Shawn Guo Aug. 6, 2012, 2:58 a.m. UTC | #1 
On Sun, Aug 05, 2012 at 02:04:18PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Enable USB host.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  arch/arm/configs/mxs_defconfig |   14 +++++++++++++-
>  1 files changed, 13 insertions(+), 1 deletions(-)
> 
I guess you did not run savedefconfig.  We do not need all those
options explicitly added there.

Regards,
Shawn

> diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
> index ccdb635..73842f9 100644
> --- a/arch/arm/configs/mxs_defconfig
> +++ b/arch/arm/configs/mxs_defconfig
> @@ -95,7 +95,7 @@ CONFIG_GPIO_SYSFS=y
>  # CONFIG_MFD_SUPPORT is not set
>  CONFIG_DISPLAY_SUPPORT=m
>  # CONFIG_HID_SUPPORT is not set
> -# CONFIG_USB_SUPPORT is not set
> +CONFIG_USB_SUPPORT=y
>  CONFIG_SOUND=y
>  CONFIG_SND=y
>  CONFIG_SND_TIMER=y
> @@ -110,6 +110,18 @@ CONFIG_SND_SOC_I2C_AND_SPI=y
>  CONFIG_SND_SOC_SGTL5000=y
>  CONFIG_REGULATOR=y
>  CONFIG_REGULATOR_FIXED_VOLTAGE=y
> +CONFIG_USB_COMMON=y
> +CONFIG_USB_ARCH_HAS_HCD=y
> +CONFIG_USB=y
> +CONFIG_USB_EHCI_ROOT_HUB_TT=y
> +CONFIG_USB_EHCI_TT_NEWSCHED=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_OTG_UTILS=y
> +CONFIG_USB_MXS_PHY=y
> +CONFIG_USB_CHIPIDEA=y
> +CONFIG_USB_CHIPIDEA_HOST=y
> +CONFIG_SCSI=y
> +CONFIG_BLK_DEV_SD=y
>  CONFIG_MMC=y
>  CONFIG_MMC_MXS=y
>  CONFIG_RTC_CLASS=y
> -- 
> 1.7.1
>
Fabio Estevam Aug. 6, 2012, 3:14 a.m. UTC | #2 
On Sun, Aug 5, 2012 at 11:58 PM, Shawn Guo <shawn.guo@linaro.org> wrote:

> I guess you did not run savedefconfig.  We do not need all those
> options explicitly added there.

No, I have not run savedefconfig. What is the correct way to use it?

Regards,

Fabio Estevam
Marek Vasut Aug. 6, 2012, 3:55 a.m. UTC | #3 
Dear Fabio Estevam,

> On Sun, Aug 5, 2012 at 11:58 PM, Shawn Guo <shawn.guo@linaro.org> wrote:
> > I guess you did not run savedefconfig.  We do not need all those
> > options explicitly added there.
> 
> No, I have not run savedefconfig. What is the correct way to use it?

make mxs_config
<edit>
make savedefconfig

I'd guess ...

> Regards,
> 
> Fabio Estevam

Best regards,
Marek Vasut
Tabi Timur-B04825 Aug. 6, 2012, 4:06 a.m. UTC | #4 
On Sun, Aug 5, 2012 at 10:55 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
>
> make mxs_config
> <edit>
> make savedefconfig

I also hand-diff the two defconfig files so that I only pick up the
relevant changes.
diff mbox

Patch

diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index ccdb635..73842f9 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -95,7 +95,7 @@  CONFIG_GPIO_SYSFS=y
 # CONFIG_MFD_SUPPORT is not set
 CONFIG_DISPLAY_SUPPORT=m
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
@@ -110,6 +110,18 @@  CONFIG_SND_SOC_I2C_AND_SPI=y
 CONFIG_SND_SOC_SGTL5000=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_MMC=y
 CONFIG_MMC_MXS=y
 CONFIG_RTC_CLASS=y