diff mbox

[cxx-conversion] Remove option to build without a C++ compiler (issue6296093)

Message ID 20120619230834.16791102BAB@torture.tor.corp.google.com
State New
Headers show

Commit Message

Diego Novillo June 19, 2012, 11:08 p.m. UTC 
Remove option to build without a C++ compiler.
    
This patch removes all the configuration code that allowed GCC to
build without a C++ compiler.  After this patch the following
configuration flags are no longer valid:

    	--enable-build-with-cxx
    	--enable-build-poststage1-with-cxx
    
All builds will unconditionally use C++.

Tested on x86_64.

Ian, could you please take a look to double check I have not missed
anything?  There was more code dealing with it than I was expecting.

I'm also not sure how to propagate the changes in go/gofrontend, but
we don't need to worry about that until we do the acutal merge into
trunk.

Thanks.  Diego.


2012-06-19   Diego Novillo  <dnovillo@google.com>

    ChangeLog.cxx-conversion
    	* Makefile.tpl (STAGE[+id+]_CXXFLAGS): Remove
    	POSTSTAGE1_CONFIGURE_FLAGS.
    	* Makefile.in: Regenerate.
    	* configure.ac (ENABLE_BUILD_WITH_CXX): Remove.  Update all users.
    	* configure: Regenerate.

    gcc/ChangeLog.cxx-conversion
    	* Makefile.in: Remove all handlers of ENABLE_BUILD_WITH_CXX.
    	* configure.ac: Likewise.
    	* configure: Regenerate.
    	* config.in: Regenerate.
    	* doc/install.texi: Remove documentation for --enable-build-with-cxx
    	and --enable-build-poststage1-with-cxx.

    gcc/go/ChangeLog.cxx-conversion
    	* go-c.h: Remove all handlers of ENABLE_BUILD_WITH_CXX.
    	* go-gcc.cc: Likewise.
    	* go-system.h: Likewise.

    libcpp/ChangeLog.cxx-conversion
    	* Makefile.in: Remove all handlers of ENABLE_BUILD_WITH_CXX.
    	* configure.ac: Likewise.
    	* configure: Regenerate.


--
This patch is available for review at http://codereview.appspot.com/6296093

Comments

Ian Lance Taylor June 20, 2012, 1:57 p.m. UTC | #1 
dnovillo@google.com (Diego Novillo) writes:

> Ian, could you please take a look to double check I have not missed
> anything?  There was more code dealing with it than I was expecting.

It all looks plausible to me.

Ian
Steven Bosscher June 20, 2012, 2:10 p.m. UTC | #2 
On Wed, Jun 20, 2012 at 1:08 AM, Diego Novillo <dnovillo@google.com> wrote:
> diff --git a/configure.ac b/configure.ac
> index 071b5e2..2a2a0c6 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -1667,7 +1653,7 @@ ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always.
>  ])
>
>
> -# By default, C is the only stage 1 language.
> +# By default, C and C++ are the only stage 1 languages.
>  stage1_languages=,c,

So shouldn't you add c++ here?


>  # Target libraries that we bootstrap.
> @@ -1705,15 +1691,14 @@ if test -d ${srcdir}/gcc; then
>       ;;
>   esac
>
> -  # If bootstrapping, then using --enable-build-with-cxx or
> -  # --enable-build-poststage1-with-cxx requires enabling C++.
> -  case ",$enable_languages,:,$ENABLE_BUILD_WITH_CXX,$ENABLE_BUILD_POSTSTAGE1_WITH_CXX,:$enable_bootstrap" in
> -    *,c++,*:*:*) ;;
> -    *:*,yes,*:yes)
> +  # If bootstrapping, C++ must be enabled.

Hmn, perhaps I misunderstand, but shouldn't C++ also be enabled if not
bootstrapping?


> +  case ",$enable_languages,:$enable_bootstrap" in
> +    *,c++,*:*) ;;
> +    *:yes)
>       if test -f ${srcdir}/gcc/cp/config-lang.in; then
>         enable_languages="${enable_languages},c++"
>       else
> -        AC_MSG_ERROR([bootstrapping with --enable-build-with-cxx or --enable-build-poststage1-with-cxx requires c++ sources])
> +        AC_MSG_ERROR([bootstrapping requires c++ sources])
>       fi
>       ;;
>   esac
> @@ -1808,10 +1793,7 @@ if test -d ${srcdir}/gcc; then
>         fi
>
>        if test "$language" = "c++"; then
> -         if test "$ENABLE_BUILD_WITH_CXX" = "yes" \
> -            || test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
> -           boot_language=yes
> -         fi
> +         boot_language=yes
>        fi

This shouldn't be necessary if you add c++ to stage1_languages

>         case ,${enable_languages}, in
> @@ -3198,26 +3180,6 @@ case $build in
>     esac ;;
>  esac


You can also remove the lang_requires_boot_languages machinery again.
It is only used by Go to enable c++ for bootstrapping the Go front
end, but with c++ enabled by default, there is no need for this hack
for Go anymore.

Ciao!
Steven
Richard Biener June 20, 2012, 2:15 p.m. UTC | #3 
On Wed, Jun 20, 2012 at 4:10 PM, Steven Bosscher <stevenb.gcc@gmail.com> wrote:
> On Wed, Jun 20, 2012 at 1:08 AM, Diego Novillo <dnovillo@google.com> wrote:
>> diff --git a/configure.ac b/configure.ac
>> index 071b5e2..2a2a0c6 100644
>> --- a/configure.ac
>> +++ b/configure.ac
>> @@ -1667,7 +1653,7 @@ ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always.
>>  ])
>>
>>
>> -# By default, C is the only stage 1 language.
>> +# By default, C and C++ are the only stage 1 languages.
>>  stage1_languages=,c,
>
> So shouldn't you add c++ here?

If you are not bootstrapping you only need frontends to build target
libraries - unless that includes a C++ library by default no, you only
need a C++ host compiler then.

I think stage1_languages should be empty and Makefile.def should
be properly set-up to add frontends required for required target libraries.

Richard.

>
>>  # Target libraries that we bootstrap.
>> @@ -1705,15 +1691,14 @@ if test -d ${srcdir}/gcc; then
>>       ;;
>>   esac
>>
>> -  # If bootstrapping, then using --enable-build-with-cxx or
>> -  # --enable-build-poststage1-with-cxx requires enabling C++.
>> -  case ",$enable_languages,:,$ENABLE_BUILD_WITH_CXX,$ENABLE_BUILD_POSTSTAGE1_WITH_CXX,:$enable_bootstrap" in
>> -    *,c++,*:*:*) ;;
>> -    *:*,yes,*:yes)
>> +  # If bootstrapping, C++ must be enabled.
>
> Hmn, perhaps I misunderstand, but shouldn't C++ also be enabled if not
> bootstrapping?
>
>
>> +  case ",$enable_languages,:$enable_bootstrap" in
>> +    *,c++,*:*) ;;
>> +    *:yes)
>>       if test -f ${srcdir}/gcc/cp/config-lang.in; then
>>         enable_languages="${enable_languages},c++"
>>       else
>> -        AC_MSG_ERROR([bootstrapping with --enable-build-with-cxx or --enable-build-poststage1-with-cxx requires c++ sources])
>> +        AC_MSG_ERROR([bootstrapping requires c++ sources])
>>       fi
>>       ;;
>>   esac
>> @@ -1808,10 +1793,7 @@ if test -d ${srcdir}/gcc; then
>>         fi
>>
>>        if test "$language" = "c++"; then
>> -         if test "$ENABLE_BUILD_WITH_CXX" = "yes" \
>> -            || test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
>> -           boot_language=yes
>> -         fi
>> +         boot_language=yes
>>        fi
>
> This shouldn't be necessary if you add c++ to stage1_languages
>
>>         case ,${enable_languages}, in
>> @@ -3198,26 +3180,6 @@ case $build in
>>     esac ;;
>>  esac
>
>
> You can also remove the lang_requires_boot_languages machinery again.
> It is only used by Go to enable c++ for bootstrapping the Go front
> end, but with c++ enabled by default, there is no need for this hack
> for Go anymore.
>
> Ciao!
> Steven
Diego Novillo June 20, 2012, 3:04 p.m. UTC | #4 
On 12-06-20 10:10 , Steven Bosscher wrote:

>> -# By default, C is the only stage 1 language.
>> +# By default, C and C++ are the only stage 1 languages.
>>   stage1_languages=,c,
>
> So shouldn't you add c++ here?

That was a bad change on the comment.  We only need C for stage1. 
Thanks for spotting it.

>> -  # If bootstrapping, then using --enable-build-with-cxx or
>> -  # --enable-build-poststage1-with-cxx requires enabling C++.
>> -  case ",$enable_languages,:,$ENABLE_BUILD_WITH_CXX,$ENABLE_BUILD_POSTSTAGE1_WITH_CXX,:$enable_bootstrap" in
>> -    *,c++,*:*:*) ;;
>> -    *:*,yes,*:yes)
>> +  # If bootstrapping, C++ must be enabled.
>
> Hmn, perhaps I misunderstand, but shouldn't C++ also be enabled if not
> bootstrapping?

It's only needed if we are building C++ code.  Everything else uses the 
host compiler.


> You can also remove the lang_requires_boot_languages machinery again.
> It is only used by Go to enable c++ for bootstrapping the Go front
> end, but with c++ enabled by default, there is no need for this hack
> for Go anymore.

Good point.  I'll send a separate patch for that.


Diego.
diff mbox

Patch

diff --git a/Makefile.in b/Makefile.in
index def860e..d81fb97 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -422,7 +422,6 @@  TFLAGS =
 STAGE_CFLAGS = $(BOOT_CFLAGS)
 STAGE_TFLAGS = $(TFLAGS)
 STAGE_CONFIGURE_FLAGS=@stage2_werror_flag@
-POSTSTAGE1_CONFIGURE_FLAGS = @POSTSTAGE1_CONFIGURE_FLAGS@
 
 
 # Defaults for stage 1; some are overridden below.
@@ -433,10 +432,7 @@  STAGE1_CXXFLAGS = $(CXXFLAGS)
 STAGE1_CXXFLAGS = $(STAGE1_CFLAGS)
 @endif target-libstdc++-v3-bootstrap
 STAGE1_TFLAGS = $(STAGE_TFLAGS)
-# STAGE1_CONFIGURE_FLAGS overridden below, so we can use
-# POSTSTAGE1_CONFIGURE_FLAGS here.
-STAGE1_CONFIGURE_FLAGS = \
-	$(STAGE_CONFIGURE_FLAGS) $(POSTSTAGE1_CONFIGURE_FLAGS)
+STAGE1_CONFIGURE_FLAGS = $(STAGE_CONFIGURE_FLAGS)
 
 # Defaults for stage 2; some are overridden below.
 STAGE2_CFLAGS = $(STAGE_CFLAGS)
@@ -446,10 +442,7 @@  STAGE2_CXXFLAGS = $(CXXFLAGS)
 STAGE2_CXXFLAGS = $(STAGE2_CFLAGS)
 @endif target-libstdc++-v3-bootstrap
 STAGE2_TFLAGS = $(STAGE_TFLAGS)
-# STAGE1_CONFIGURE_FLAGS overridden below, so we can use
-# POSTSTAGE1_CONFIGURE_FLAGS here.
-STAGE2_CONFIGURE_FLAGS = \
-	$(STAGE_CONFIGURE_FLAGS) $(POSTSTAGE1_CONFIGURE_FLAGS)
+STAGE2_CONFIGURE_FLAGS = $(STAGE_CONFIGURE_FLAGS)
 
 # Defaults for stage 3; some are overridden below.
 STAGE3_CFLAGS = $(STAGE_CFLAGS)
@@ -459,10 +452,7 @@  STAGE3_CXXFLAGS = $(CXXFLAGS)
 STAGE3_CXXFLAGS = $(STAGE3_CFLAGS)
 @endif target-libstdc++-v3-bootstrap
 STAGE3_TFLAGS = $(STAGE_TFLAGS)
-# STAGE1_CONFIGURE_FLAGS overridden below, so we can use
-# POSTSTAGE1_CONFIGURE_FLAGS here.
-STAGE3_CONFIGURE_FLAGS = \
-	$(STAGE_CONFIGURE_FLAGS) $(POSTSTAGE1_CONFIGURE_FLAGS)
+STAGE3_CONFIGURE_FLAGS = $(STAGE_CONFIGURE_FLAGS)
 
 # Defaults for stage 4; some are overridden below.
 STAGE4_CFLAGS = $(STAGE_CFLAGS)
@@ -472,10 +462,7 @@  STAGE4_CXXFLAGS = $(CXXFLAGS)
 STAGE4_CXXFLAGS = $(STAGE4_CFLAGS)
 @endif target-libstdc++-v3-bootstrap
 STAGE4_TFLAGS = $(STAGE_TFLAGS)
-# STAGE1_CONFIGURE_FLAGS overridden below, so we can use
-# POSTSTAGE1_CONFIGURE_FLAGS here.
-STAGE4_CONFIGURE_FLAGS = \
-	$(STAGE_CONFIGURE_FLAGS) $(POSTSTAGE1_CONFIGURE_FLAGS)
+STAGE4_CONFIGURE_FLAGS = $(STAGE_CONFIGURE_FLAGS)
 
 # Defaults for stage profile; some are overridden below.
 STAGEprofile_CFLAGS = $(STAGE_CFLAGS)
@@ -485,10 +472,7 @@  STAGEprofile_CXXFLAGS = $(CXXFLAGS)
 STAGEprofile_CXXFLAGS = $(STAGEprofile_CFLAGS)
 @endif target-libstdc++-v3-bootstrap
 STAGEprofile_TFLAGS = $(STAGE_TFLAGS)
-# STAGE1_CONFIGURE_FLAGS overridden below, so we can use
-# POSTSTAGE1_CONFIGURE_FLAGS here.
-STAGEprofile_CONFIGURE_FLAGS = \
-	$(STAGE_CONFIGURE_FLAGS) $(POSTSTAGE1_CONFIGURE_FLAGS)
+STAGEprofile_CONFIGURE_FLAGS = $(STAGE_CONFIGURE_FLAGS)
 
 # Defaults for stage feedback; some are overridden below.
 STAGEfeedback_CFLAGS = $(STAGE_CFLAGS)
@@ -498,10 +482,7 @@  STAGEfeedback_CXXFLAGS = $(CXXFLAGS)
 STAGEfeedback_CXXFLAGS = $(STAGEfeedback_CFLAGS)
 @endif target-libstdc++-v3-bootstrap
 STAGEfeedback_TFLAGS = $(STAGE_TFLAGS)
-# STAGE1_CONFIGURE_FLAGS overridden below, so we can use
-# POSTSTAGE1_CONFIGURE_FLAGS here.
-STAGEfeedback_CONFIGURE_FLAGS = \
-	$(STAGE_CONFIGURE_FLAGS) $(POSTSTAGE1_CONFIGURE_FLAGS)
+STAGEfeedback_CONFIGURE_FLAGS = $(STAGE_CONFIGURE_FLAGS)
 
 
 # Only build the C compiler for stage1, because that is the only one that
@@ -519,9 +500,6 @@  STAGE1_LANGUAGES = @stage1_languages@
 #   the last argument when conflicting --enable arguments are passed.
 # * Likewise, we force-disable coverage flags, since the installed
 #   compiler probably has never heard of them.
-# * Don't remove this, because above we added
-#   POSTSTAGE1_CONFIGURE_FLAGS to STAGE_CONFIGURE_FLAGS, which
-#   we don't want for STAGE1_CONFIGURE_FLAGS.
 STAGE1_CONFIGURE_FLAGS = --disable-intermodule $(STAGE1_CHECKING) \
 	  --disable-coverage --enable-languages="$(STAGE1_LANGUAGES)"
 
diff --git a/Makefile.tpl b/Makefile.tpl
index 371c3b6..2545d72 100644
--- a/Makefile.tpl
+++ b/Makefile.tpl
@@ -425,7 +425,6 @@  TFLAGS =
 STAGE_CFLAGS = $(BOOT_CFLAGS)
 STAGE_TFLAGS = $(TFLAGS)
 STAGE_CONFIGURE_FLAGS=@stage2_werror_flag@
-POSTSTAGE1_CONFIGURE_FLAGS = @POSTSTAGE1_CONFIGURE_FLAGS@
 
 [+ FOR bootstrap-stage +]
 # Defaults for stage [+id+]; some are overridden below.
@@ -436,10 +435,7 @@  STAGE[+id+]_CXXFLAGS = $(CXXFLAGS)
 STAGE[+id+]_CXXFLAGS = $(STAGE[+id+]_CFLAGS)
 @endif target-libstdc++-v3-bootstrap
 STAGE[+id+]_TFLAGS = $(STAGE_TFLAGS)
-# STAGE1_CONFIGURE_FLAGS overridden below, so we can use
-# POSTSTAGE1_CONFIGURE_FLAGS here.
-STAGE[+id+]_CONFIGURE_FLAGS = \
-	$(STAGE_CONFIGURE_FLAGS) $(POSTSTAGE1_CONFIGURE_FLAGS)
+STAGE[+id+]_CONFIGURE_FLAGS = $(STAGE_CONFIGURE_FLAGS)
 [+ ENDFOR bootstrap-stage +]
 
 # Only build the C compiler for stage1, because that is the only one that
@@ -457,9 +453,6 @@  STAGE1_LANGUAGES = @stage1_languages@
 #   the last argument when conflicting --enable arguments are passed.
 # * Likewise, we force-disable coverage flags, since the installed
 #   compiler probably has never heard of them.
-# * Don't remove this, because above we added
-#   POSTSTAGE1_CONFIGURE_FLAGS to STAGE[+id+]_CONFIGURE_FLAGS, which
-#   we don't want for STAGE1_CONFIGURE_FLAGS.
 STAGE1_CONFIGURE_FLAGS = --disable-intermodule $(STAGE1_CHECKING) \
 	  --disable-coverage --enable-languages="$(STAGE1_LANGUAGES)"
 
diff --git a/configure b/configure
index 020cd90..079a206 100755
--- a/configure
+++ b/configure
@@ -556,7 +556,6 @@  enable_option_checking=no
 ac_subst_vars='LTLIBOBJS
 LIBOBJS
 compare_exclusions
-POSTSTAGE1_CONFIGURE_FLAGS
 stage2_werror_flag
 stage1_checking
 stage1_cflags
@@ -752,8 +751,6 @@  enable_libada
 enable_libssp
 enable_static_libjava
 enable_bootstrap
-enable_build_with_cxx
-enable_build_poststage1_with_cxx
 with_mpc
 with_mpc_include
 with_mpc_lib
@@ -1471,9 +1468,6 @@  Optional Features:
   --enable-static-libjava[=ARG]
                           build static libjava [default=no]
   --enable-bootstrap      enable bootstrapping [yes if native build]
-  --enable-build-with-cxx build with C++ compiler instead of C compiler
-  --enable-build-poststage1-with-cxx
-                          build stages 2 and 3 with C++, not C
   --disable-ppl-version-check
                           disable check for PPL version
   --enable-cloog-backend[=BACKEND]
@@ -5070,24 +5064,6 @@  $as_echo "$as_me: WARNING: trying to bootstrap a cross compiler" >&2;}
     ;;
 esac
 
-# See if we are building gcc with C++.
-# Check whether --enable-build-with-cxx was given.
-if test "${enable_build_with_cxx+set}" = set; then :
-  enableval=$enable_build_with_cxx; ENABLE_BUILD_WITH_CXX=$enableval
-else
-  ENABLE_BUILD_WITH_CXX=yes
-fi
-
-
-# Build stage1 with C and build stages 2 and 3 with C++.
-# Check whether --enable-build-poststage1-with-cxx was given.
-if test "${enable_build_poststage1_with_cxx+set}" = set; then :
-  enableval=$enable_build_poststage1_with_cxx; ENABLE_BUILD_POSTSTAGE1_WITH_CXX=$enableval
-else
-  ENABLE_BUILD_POSTSTAGE1_WITH_CXX=yes
-fi
-
-
 # Used for setting $lt_cv_objdir
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
 $as_echo_n "checking for objdir... " >&6; }
@@ -6161,7 +6137,7 @@  fi
 
 
 
-# By default, C is the only stage 1 language.
+# By default, C and C++ are the only stage 1 languages.
 stage1_languages=,c,
 
 # Target libraries that we bootstrap.
@@ -6199,15 +6175,14 @@  if test -d ${srcdir}/gcc; then
       ;;
   esac
 
-  # If bootstrapping, then using --enable-build-with-cxx or
-  # --enable-build-poststage1-with-cxx requires enabling C++.
-  case ",$enable_languages,:,$ENABLE_BUILD_WITH_CXX,$ENABLE_BUILD_POSTSTAGE1_WITH_CXX,:$enable_bootstrap" in
-    *,c++,*:*:*) ;;
-    *:*,yes,*:yes)
+  # If bootstrapping, C++ must be enabled.
+  case ",$enable_languages,:$enable_bootstrap" in
+    *,c++,*:*) ;;
+    *:yes)
       if test -f ${srcdir}/gcc/cp/config-lang.in; then
         enable_languages="${enable_languages},c++"
       else
-        as_fn_error "bootstrapping with --enable-build-with-cxx or --enable-build-poststage1-with-cxx requires c++ sources" "$LINENO" 5
+        as_fn_error "bootstrapping requires c++ sources" "$LINENO" 5
       fi
       ;;
   esac
@@ -6302,10 +6277,7 @@  if test -d ${srcdir}/gcc; then
         fi
 
 	if test "$language" = "c++"; then
-	  if test "$ENABLE_BUILD_WITH_CXX" = "yes" \
-	     || test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
-	    boot_language=yes
-	  fi
+	  boot_language=yes
 	fi
 
         case ,${enable_languages}, in
@@ -14393,43 +14365,6 @@  case $build in
     esac ;;
 esac
 
-# This is aimed to mimic bootstrap with a non-GCC compiler to catch problems.
-if test "$GCC" = yes -a "$ENABLE_BUILD_WITH_CXX" != yes; then
-  saved_CFLAGS="$CFLAGS"
-
-  # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it.
-  CFLAGS="$CFLAGS -fkeep-inline-functions"
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -fkeep-inline-functions is supported" >&5
-$as_echo_n "checking whether -fkeep-inline-functions is supported... " >&6; }
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#if (__GNUC__ < 3) \
-    || (__GNUC__ == 3 && (__GNUC_MINOR__ < 3 \
-			  || (__GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ < 1)))
-#error http://gcc.gnu.org/PR29382
-#endif
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }; stage1_cflags="$stage1_cflags -fkeep-inline-functions"
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-  CFLAGS="$saved_CFLAGS"
-fi
-
 
 
 # Enable --enable-checking in stage1 of the compiler.
@@ -14464,15 +14399,6 @@  case ${enable_werror} in
 esac
 
 
-# If using ENABLE_BUILD_POSTSTAGE1_WITH_CXX, pass
-# --enable-build-with-cxx after stage1.
-if test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
-  POSTSTAGE1_CONFIGURE_FLAGS=--enable-build-with-cxx
-else
-  POSTSTAGE1_CONFIGURE_FLAGS=
-fi
-
-
 # Specify what files to not compare during bootstrap.
 
 compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
diff --git a/configure.ac b/configure.ac
index 071b5e2..2a2a0c6 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1203,20 +1203,6 @@  case "$have_compiler:$host:$target:$enable_bootstrap" in
     ;;
 esac
 
-# See if we are building gcc with C++.
-AC_ARG_ENABLE(build-with-cxx,
-[AS_HELP_STRING([--enable-build-with-cxx],
-		[build with C++ compiler instead of C compiler])],
-ENABLE_BUILD_WITH_CXX=$enableval,
-ENABLE_BUILD_WITH_CXX=yes)
-
-# Build stage1 with C and build stages 2 and 3 with C++.
-AC_ARG_ENABLE(build-poststage1-with-cxx,
-[AS_HELP_STRING([--enable-build-poststage1-with-cxx],
-		[build stages 2 and 3 with C++, not C])],
-ENABLE_BUILD_POSTSTAGE1_WITH_CXX=$enableval,
-ENABLE_BUILD_POSTSTAGE1_WITH_CXX=yes)
-
 # Used for setting $lt_cv_objdir
 _LT_CHECK_OBJDIR
 
@@ -1667,7 +1653,7 @@  ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always.
 ])
 
 
-# By default, C is the only stage 1 language.
+# By default, C and C++ are the only stage 1 languages.
 stage1_languages=,c,
 
 # Target libraries that we bootstrap.
@@ -1705,15 +1691,14 @@  if test -d ${srcdir}/gcc; then
       ;;
   esac
 
-  # If bootstrapping, then using --enable-build-with-cxx or
-  # --enable-build-poststage1-with-cxx requires enabling C++.
-  case ",$enable_languages,:,$ENABLE_BUILD_WITH_CXX,$ENABLE_BUILD_POSTSTAGE1_WITH_CXX,:$enable_bootstrap" in
-    *,c++,*:*:*) ;;
-    *:*,yes,*:yes)
+  # If bootstrapping, C++ must be enabled.
+  case ",$enable_languages,:$enable_bootstrap" in
+    *,c++,*:*) ;;
+    *:yes)
       if test -f ${srcdir}/gcc/cp/config-lang.in; then
         enable_languages="${enable_languages},c++"
       else
-        AC_MSG_ERROR([bootstrapping with --enable-build-with-cxx or --enable-build-poststage1-with-cxx requires c++ sources])
+        AC_MSG_ERROR([bootstrapping requires c++ sources])
       fi
       ;;
   esac
@@ -1808,10 +1793,7 @@  if test -d ${srcdir}/gcc; then
         fi
 
 	if test "$language" = "c++"; then
-	  if test "$ENABLE_BUILD_WITH_CXX" = "yes" \
-	     || test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
-	    boot_language=yes
-	  fi
+	  boot_language=yes
 	fi
 
         case ,${enable_languages}, in
@@ -3198,26 +3180,6 @@  case $build in
     esac ;;
 esac
 
-# This is aimed to mimic bootstrap with a non-GCC compiler to catch problems.
-if test "$GCC" = yes -a "$ENABLE_BUILD_WITH_CXX" != yes; then
-  saved_CFLAGS="$CFLAGS"
-
-  # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it.
-  CFLAGS="$CFLAGS -fkeep-inline-functions"
-  AC_MSG_CHECKING([whether -fkeep-inline-functions is supported])
-  AC_TRY_COMPILE([
-#if (__GNUC__ < 3) \
-    || (__GNUC__ == 3 && (__GNUC_MINOR__ < 3 \
-			  || (__GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ < 1)))
-#error http://gcc.gnu.org/PR29382
-#endif
-    ],,
-    [AC_MSG_RESULT([yes]); stage1_cflags="$stage1_cflags -fkeep-inline-functions"],
-    [AC_MSG_RESULT([no])])
-
-  CFLAGS="$saved_CFLAGS"
-fi
-
 AC_SUBST(stage1_cflags)
 
 # Enable --enable-checking in stage1 of the compiler.
@@ -3247,15 +3209,6 @@  case ${enable_werror} in
 esac
 AC_SUBST(stage2_werror_flag)
 
-# If using ENABLE_BUILD_POSTSTAGE1_WITH_CXX, pass
-# --enable-build-with-cxx after stage1.
-if test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
-  POSTSTAGE1_CONFIGURE_FLAGS=--enable-build-with-cxx
-else
-  POSTSTAGE1_CONFIGURE_FLAGS=
-fi
-AC_SUBST(POSTSTAGE1_CONFIGURE_FLAGS)
-
 # Specify what files to not compare during bootstrap.
 
 compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
diff --git a/gcc/Makefile.in b/gcc/Makefile.in
index 8b3e083..9d26c32 100644
--- a/gcc/Makefile.in
+++ b/gcc/Makefile.in
@@ -223,13 +223,6 @@  RANLIB_FLAGS = @ranlib_flags@
 HOST_LIBS = @HOST_LIBS@
 
 # The name of the compiler to use.
-ENABLE_BUILD_WITH_CXX = @ENABLE_BUILD_WITH_CXX@
-ifneq ($(ENABLE_BUILD_WITH_CXX),yes)
-COMPILER = $(CC)
-COMPILER_FLAGS = $(CFLAGS)
-LINKER = $(CC)
-LINKER_FLAGS = $(CFLAGS)
-else
 COMPILER = $(CXX)
 COMPILER_FLAGS = $(CXXFLAGS)
 # If HOST_LIBS is set, then the user is controlling the libraries to
@@ -243,7 +236,6 @@  else
 LINKER = $(CC)
 LINKER_FLAGS = $(CFLAGS)
 endif
-endif
 
 # -------------------------------------------
 # Programs which operate on the build machine
@@ -337,13 +329,8 @@  CLOOGINC = @CLOOGINC@
 enable_lto = @enable_lto@
 
 # Compiler and flags needed for plugin support
-ifneq ($(ENABLE_BUILD_WITH_CXX),yes)
-PLUGINCC = @CC@
-PLUGINCFLAGS = @CFLAGS@
-else
 PLUGINCC = @CXX@
 PLUGINCFLAGS = @CXXFLAGS@
-endif
 
 # Libs and linker options needed for plugin support
 PLUGINLIBS = @pluginlibs@
@@ -733,22 +720,12 @@  BUILD_CFLAGS= @BUILD_CFLAGS@ -DGENERATOR_FILE
 BUILD_CXXFLAGS = @BUILD_CXXFLAGS@ -DGENERATOR_FILE
 
 # Native compiler that we use.  This may be C++ some day.
-ifneq ($(ENABLE_BUILD_WITH_CXX),yes)
-COMPILER_FOR_BUILD = $(CC_FOR_BUILD)
-BUILD_COMPILERFLAGS = $(BUILD_CFLAGS)
-else
 COMPILER_FOR_BUILD = $(CXX_FOR_BUILD)
 BUILD_COMPILERFLAGS = $(BUILD_CXXFLAGS)
-endif
 
 # Native linker that we use.
-ifneq ($(ENABLE_BUILD_WITH_CXX),yes)
-LINKER_FOR_BUILD = $(CC_FOR_BUILD)
-BUILD_LINKERFLAGS = $(BUILD_CFLAGS)
-else
 LINKER_FOR_BUILD = $(CXX_FOR_BUILD)
 BUILD_LINKERFLAGS = $(BUILD_CXXFLAGS)
-endif
 
 # Native linker and preprocessor flags.  For x-fragment overrides.
 BUILD_LDFLAGS=@BUILD_LDFLAGS@
@@ -999,18 +976,10 @@  ALL_CXXFLAGS = $(T_CFLAGS) $(CFLAGS-$@) $(CXXFLAGS) $(INTERNAL_CFLAGS) \
 ALL_CPPFLAGS = $(INCLUDES) $(CPPFLAGS)
 
 # This is the variable to use when using $(COMPILER).
-ifneq ($(ENABLE_BUILD_WITH_CXX),yes)
-ALL_COMPILERFLAGS = $(ALL_CFLAGS)
-else
 ALL_COMPILERFLAGS = $(ALL_CXXFLAGS)
-endif
 
 # This is the variable to use when using $(LINKER).
-ifneq ($(ENABLE_BUILD_WITH_CXX),yes)
-ALL_LINKERFLAGS = $(ALL_CFLAGS)
-else
 ALL_LINKERFLAGS = $(ALL_CXXFLAGS)
-endif
 
 # Build and host support libraries.
 LIBIBERTY = ../libiberty/libiberty.a
diff --git a/gcc/config.in b/gcc/config.in
index 7b12b4b..6d986be 100644
--- a/gcc/config.in
+++ b/gcc/config.in
@@ -45,12 +45,6 @@ 
 #endif
 
 
-/* Define if building with C++. */
-#ifndef USED_FOR_TARGET
-#undef ENABLE_BUILD_WITH_CXX
-#endif
-
-
 /* Define if you want more run-time sanity checks. This one gets a grab bag of
    miscellaneous but relatively cheap checks. */
 #ifndef USED_FOR_TARGET
diff --git a/gcc/configure b/gcc/configure
index 066ba5f..7ed2458 100755
--- a/gcc/configure
+++ b/gcc/configure
@@ -766,7 +766,6 @@  enable_shared
 enable_fixed_point
 enable_decimal_float
 enable_multilib
-ENABLE_BUILD_WITH_CXX
 coverage_flags
 valgrind_command
 valgrind_path_defines
@@ -873,7 +872,6 @@  enable_werror_always
 enable_checking
 enable_coverage
 enable_gather_detailed_mem_stats
-enable_build_with_cxx
 with_stabs
 enable_multilib
 enable___cxa_atexit
@@ -1575,7 +1573,6 @@  Optional Features:
                           Values are opt, noopt, default is noopt
   --enable-gather-detailed-mem-stats
                           enable detailed memory allocation stats gathering
-  --enable-build-with-cxx build with C++ compiler instead of C compiler
   --enable-multilib       enable library support for multiple ABIs
   --enable-__cxa_atexit   enable __cxa_atexit for C++
   --enable-decimal-float={no,yes,bid,dpd}
@@ -6996,21 +6993,6 @@  fi
 # Miscenalleous configure options
 # -------------------------------
 
-# See if we are building gcc with C++.
-# Check whether --enable-build-with-cxx was given.
-if test "${enable_build_with_cxx+set}" = set; then :
-  enableval=$enable_build_with_cxx; ENABLE_BUILD_WITH_CXX=$enableval
-else
-  ENABLE_BUILD_WITH_CXX=yes
-fi
-
-
-if test "$ENABLE_BUILD_WITH_CXX" = "yes"; then
-
-$as_echo "#define ENABLE_BUILD_WITH_CXX 1" >>confdefs.h
-
-fi
-
 # With stabs
 
 # Check whether --with-stabs was given.
@@ -9514,6 +9496,12 @@  fi
 
 # g++ on Solaris 10+ defines _XOPEN_SOURCE=600, which exposes a different
 # iconv() prototype.
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
 
       if test "X$prefix" = "XNONE"; then
     acl_final_prefix="$ac_default_prefix"
@@ -10055,13 +10043,6 @@  fi
   fi
 
 
-if test "$ENABLE_BUILD_WITH_CXX" = "yes"; then :
-  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
 
 
 
@@ -10217,169 +10198,12 @@  _ACEOF
 
   fi
 
-   ac_ext=c
+ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-else
-
-
-
-
-
-          am_save_CPPFLAGS="$CPPFLAGS"
-
-  for element in $INCICONV; do
-    haveit=
-    for x in $CPPFLAGS; do
-
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  acl_save_exec_prefix="$exec_prefix"
-  exec_prefix="$acl_final_exec_prefix"
-  eval x=\"$x\"
-  exec_prefix="$acl_save_exec_prefix"
-  prefix="$acl_save_prefix"
-
-      if test "X$x" = "X$element"; then
-        haveit=yes
-        break
-      fi
-    done
-    if test -z "$haveit"; then
-      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
-    fi
-  done
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
-$as_echo_n "checking for iconv... " >&6; }
-if test "${am_cv_func_iconv+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-
-    am_cv_func_iconv="no, consider installing GNU libiconv"
-    am_cv_lib_iconv=no
-    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
-       iconv(cd,NULL,NULL,NULL,NULL);
-       iconv_close(cd);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-    if test "$am_cv_func_iconv" != yes; then
-      am_save_LIBS="$LIBS"
-      LIBS="$LIBS $LIBICONV"
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
-         iconv(cd,NULL,NULL,NULL,NULL);
-         iconv_close(cd);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  am_cv_lib_iconv=yes
-        am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-      LIBS="$am_save_LIBS"
-    fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
-$as_echo "$am_cv_func_iconv" >&6; }
-  if test "$am_cv_func_iconv" = yes; then
-
-$as_echo "#define HAVE_ICONV 1" >>confdefs.h
-
-  fi
-  if test "$am_cv_lib_iconv" = yes; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
-$as_echo_n "checking how to link with libiconv... " >&6; }
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
-$as_echo "$LIBICONV" >&6; }
-  else
-            CPPFLAGS="$am_save_CPPFLAGS"
-    LIBICONV=
-    LTLIBICONV=
-  fi
-
-
-
-  if test "$am_cv_func_iconv" = yes; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv declaration" >&5
-$as_echo_n "checking for iconv declaration... " >&6; }
-    if test "${am_cv_proto_iconv+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <stdlib.h>
-#include <iconv.h>
-extern
-#ifdef __cplusplus
-"C"
-#endif
-#if defined(__STDC__) || defined(__cplusplus)
-size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
-#else
-size_t iconv();
-#endif
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  am_cv_proto_iconv_arg1=""
-else
-  am_cv_proto_iconv_arg1="const"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-      am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"
-fi
-
-    am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ac_t:-
-         }$am_cv_proto_iconv" >&5
-$as_echo "${ac_t:-
-         }$am_cv_proto_iconv" >&6; }
-
-cat >>confdefs.h <<_ACEOF
-#define ICONV_CONST $am_cv_proto_iconv_arg1
-_ACEOF
-
-  fi
-
-fi
 
 # Until we have in-tree GNU iconv:
 LIBICONV_DEP=
@@ -10765,14 +10589,13 @@  done
 
 # g++ on Solaris 10+ defines _XOPEN_SOURCE=600, which hides the madvise()
 # prototype.
-if test "$ENABLE_BUILD_WITH_CXX" = "yes"; then :
-  ac_ext=cpp
+ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
-   for ac_func in madvise
+for ac_func in madvise
 do
   ac_tr_decl=`$as_echo "HAVE_DECL_$ac_func" | $as_tr_cpp`
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $ac_func is declared" >&5
@@ -10785,8 +10608,8 @@  else
 #undef $ac_tr_decl
 #define $ac_tr_decl 1
 
-     #include "ansidecl.h"
-     #include "system.h"
+  #include "ansidecl.h"
+  #include "system.h"
 
 
 int
@@ -10823,66 +10646,12 @@  fi
 
 done
 
-   ac_ext=c
+ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-else
-  for ac_func in madvise
-do
-  ac_tr_decl=`$as_echo "HAVE_DECL_$ac_func" | $as_tr_cpp`
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $ac_func is declared" >&5
-$as_echo_n "checking whether $ac_func is declared... " >&6; }
-if { as_var=gcc_cv_have_decl_$ac_func; eval "test \"\${$as_var+set}\" = set"; }; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#undef $ac_tr_decl
-#define $ac_tr_decl 1
-
-     #include "ansidecl.h"
-     #include "system.h"
-
-
-int
-main ()
-{
-#ifndef $ac_func
-char *(*pfn) = (char *(*)) $ac_func ;
-#endif
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  eval "gcc_cv_have_decl_$ac_func=yes"
-else
-  eval "gcc_cv_have_decl_$ac_func=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-if eval "test \"`echo '$gcc_cv_have_decl_'$ac_func`\" = yes"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; } ; cat >>confdefs.h <<_ACEOF
-#define $ac_tr_decl 1
-_ACEOF
-
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; } ; cat >>confdefs.h <<_ACEOF
-#define $ac_tr_decl 0
-_ACEOF
-
-fi
-
-done
-
-
-fi
 
 # More time-related stuff.
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct tms" >&5
@@ -17971,7 +17740,7 @@  else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 17974 "configure"
+#line 17743 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -18077,7 +17846,7 @@  else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 18080 "configure"
+#line 17849 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
diff --git a/gcc/configure.ac b/gcc/configure.ac
index 0c55952..3503ea3 100644
--- a/gcc/configure.ac
+++ b/gcc/configure.ac
@@ -597,18 +597,6 @@  fi
 # Miscenalleous configure options
 # -------------------------------
 
-# See if we are building gcc with C++.
-AC_ARG_ENABLE(build-with-cxx,
-[AS_HELP_STRING([--enable-build-with-cxx],
-		[build with C++ compiler instead of C compiler])],
-ENABLE_BUILD_WITH_CXX=$enableval,
-ENABLE_BUILD_WITH_CXX=yes)
-AC_SUBST(ENABLE_BUILD_WITH_CXX)
-if test "$ENABLE_BUILD_WITH_CXX" = "yes"; then
-  AC_DEFINE(ENABLE_BUILD_WITH_CXX, 1,
-	    [Define if building with C++.])
-fi
-
 # With stabs
 AC_ARG_WITH(stabs,
 [AS_HELP_STRING([--with-stabs],
@@ -1067,11 +1055,9 @@  AC_FUNC_FORK
 
 # g++ on Solaris 10+ defines _XOPEN_SOURCE=600, which exposes a different
 # iconv() prototype.
-AS_IF([test "$ENABLE_BUILD_WITH_CXX" = "yes"],
-  [AC_LANG_PUSH([C++])
-   AM_ICONV
-   AC_LANG_POP([C++])],
-  [AM_ICONV])
+AC_LANG_PUSH([C++])
+AM_ICONV
+AC_LANG_POP([C++])
 
 # Until we have in-tree GNU iconv:
 LIBICONV_DEP=
@@ -1140,18 +1126,12 @@  gcc_AC_CHECK_DECLS(sigaltstack, , ,[
 
 # g++ on Solaris 10+ defines _XOPEN_SOURCE=600, which hides the madvise()
 # prototype.
-AS_IF([test "$ENABLE_BUILD_WITH_CXX" = "yes"],
-  [AC_LANG_PUSH([C++])
-   gcc_AC_CHECK_DECLS(madvise, , ,[
-     #include "ansidecl.h"
-     #include "system.h"
-   ])
-   AC_LANG_POP([C++])],
-  [gcc_AC_CHECK_DECLS(madvise, , ,[
-     #include "ansidecl.h"
-     #include "system.h"
-   ])
+AC_LANG_PUSH([C++])
+gcc_AC_CHECK_DECLS(madvise, , ,[
+  #include "ansidecl.h"
+  #include "system.h"
 ])
+AC_LANG_POP([C++])
 
 # More time-related stuff.
 AC_CACHE_CHECK(for struct tms, ac_cv_struct_tms, [
diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi
index 7b5cf1a..bee59ff 100644
--- a/gcc/doc/install.texi
+++ b/gcc/doc/install.texi
@@ -1293,16 +1293,6 @@  opposite effect.  If neither option is specified, the configure script
 will try to guess whether the @code{.init_array} and
 @code{.fini_array} sections are supported and, if they are, use them.
 
-@item --enable-build-with-cxx
-Build GCC using a C++ compiler rather than a C compiler.  This is an
-experimental option which may become the default in a later release.
-
-@item --enable-build-poststage1-with-cxx
-When bootstrapping, build stages 2 and 3 of GCC using a C++ compiler
-rather than a C compiler.  Stage 1 is still built with a C compiler.
-This is enabled by default and may be disabled using
-@option{--disable-build-poststage1-with-cxx}.
-
 @item --enable-maintainer-mode
 The build rules that regenerate the Autoconf and Automake output files as
 well as the GCC master message catalog @file{gcc.pot} are normally
diff --git a/gcc/go/go-c.h b/gcc/go/go-c.h
index d46a087..a7f7b1f 100644
--- a/gcc/go/go-c.h
+++ b/gcc/go/go-c.h
@@ -20,16 +20,7 @@  along with GCC; see the file COPYING3.  If not see
 #ifndef GO_GO_C_H
 #define GO_GO_C_H
 
-#ifdef ENABLE_BUILD_WITH_CXX
 #define GO_EXTERN_C
-#else
-#define GO_EXTERN_C extern "C"
-#endif
-
-#if defined(__cplusplus) && !defined(ENABLE_BUILD_WITH_CXX)
-extern "C"
-{
-#endif
 
 #include "machmode.h"
 
@@ -71,8 +62,4 @@  extern const char *go_read_export_data (int, off_t, char **, size_t *, int *);
 
 extern GTY(()) tree go_non_zero_struct;
 
-#if defined(__cplusplus) && !defined(ENABLE_BUILD_WITH_CXX)
-} /* End extern "C".  */
-#endif
-
 #endif /* !defined(GO_GO_C_H) */
diff --git a/gcc/go/go-gcc.cc b/gcc/go/go-gcc.cc
index 4729a3b..84bc972 100644
--- a/gcc/go/go-gcc.cc
+++ b/gcc/go/go-gcc.cc
@@ -24,20 +24,11 @@ 
 // include it here before tree.h includes it later.
 #include <gmp.h>
 
-#ifndef ENABLE_BUILD_WITH_CXX
-extern "C"
-{
-#endif
-
 #include "tree.h"
 #include "tree-iterator.h"
 #include "gimple.h"
 #include "toplev.h"
 
-#ifndef ENABLE_BUILD_WITH_CXX
-}
-#endif
-
 #include "go-c.h"
 
 #include "gogo.h"
diff --git a/gcc/go/go-system.h b/gcc/go/go-system.h
index 08aac6a..2decc55 100644
--- a/gcc/go/go-system.h
+++ b/gcc/go/go-system.h
@@ -134,11 +134,6 @@  struct hash<T*>
 // later.
 #include <cstdio>
 
-#ifndef ENABLE_BUILD_WITH_CXX
-extern "C"
-{
-#endif
-
 #include "system.h"
 #include "ansidecl.h"
 #include "coretypes.h"
@@ -147,10 +142,6 @@  extern "C"
 #include "input.h"		/* For source_location.  */
 #include "intl.h"		/* For _().  */
 
-#ifndef ENABLE_BUILD_WITH_CXX
-} // End extern "C"
-#endif
-
 // When using gcc, go_assert is just gcc_assert.
 #define go_assert(EXPR) gcc_assert(EXPR)
 
diff --git a/gcc/go/gofrontend/expressions.cc b/gcc/go/gofrontend/expressions.cc
index a2ac987..17e28e5 100644
--- a/gcc/go/gofrontend/expressions.cc
+++ b/gcc/go/gofrontend/expressions.cc
@@ -10,11 +10,6 @@ 
 
 #include <gmp.h>
 
-#ifndef ENABLE_BUILD_WITH_CXX
-extern "C"
-{
-#endif
-
 #include "toplev.h"
 #include "intl.h"
 #include "tree.h"
@@ -24,10 +19,6 @@  extern "C"
 #include "real.h"
 #include "realmpfr.h"
 
-#ifndef ENABLE_BUILD_WITH_CXX
-}
-#endif
-
 #include "go-c.h"
 #include "gogo.h"
 #include "types.h"
diff --git a/gcc/go/gofrontend/gogo-tree.cc b/gcc/go/gofrontend/gogo-tree.cc
index bc33769..c933d93 100644
--- a/gcc/go/gofrontend/gogo-tree.cc
+++ b/gcc/go/gofrontend/gogo-tree.cc
@@ -8,11 +8,6 @@ 
 
 #include <gmp.h>
 
-#ifndef ENABLE_BUILD_WITH_CXX
-extern "C"
-{
-#endif
-
 #include "toplev.h"
 #include "tree.h"
 #include "gimple.h"
@@ -22,12 +17,8 @@  extern "C"
 #include "convert.h"
 #include "output.h"
 #include "diagnostic.h"
-
-#ifndef ENABLE_BUILD_WITH_CXX
-}
-#endif
-
 #include "go-c.h"
+
 #include "types.h"
 #include "expressions.h"
 #include "statements.h"
diff --git a/gcc/go/gofrontend/types.cc b/gcc/go/gofrontend/types.cc
index 228f3fa..c52f41b 100644
--- a/gcc/go/gofrontend/types.cc
+++ b/gcc/go/gofrontend/types.cc
@@ -8,11 +8,6 @@ 
 
 #include <gmp.h>
 
-#ifndef ENABLE_BUILD_WITH_CXX
-extern "C"
-{
-#endif
-
 #include "toplev.h"
 #include "intl.h"
 #include "tree.h"
@@ -20,10 +15,6 @@  extern "C"
 #include "real.h"
 #include "convert.h"
 
-#ifndef ENABLE_BUILD_WITH_CXX
-}
-#endif
-
 #include "go-c.h"
 #include "gogo.h"
 #include "operator.h"
diff --git a/libcpp/Makefile.in b/libcpp/Makefile.in
index d6df46d..3ae3280 100644
--- a/libcpp/Makefile.in
+++ b/libcpp/Makefile.in
@@ -77,16 +77,9 @@  ALL_CXXFLAGS = $(CXXFLAGS) $(WARN_CXXFLAGS) $(NOEXCEPTION_FLAGS) $(INCLUDES) \
 	$(CPPFLAGS)
 
 # The name of the compiler to use.
-ENABLE_BUILD_WITH_CXX = @ENABLE_BUILD_WITH_CXX@
-ifneq ($(ENABLE_BUILD_WITH_CXX),yes)
-COMPILER = $(CC)
-COMPILER_FLAGS = $(ALL_CFLAGS)
-DEPMODE = $(CCDEPMODE)
-else
 COMPILER = $(CXX)
 COMPILER_FLAGS = $(ALL_CXXFLAGS)
 DEPMODE = $(CXXDEPMODE)
-endif
 
 
 libcpp_a_OBJS = charset.o directives.o directives-only.o errors.o \
diff --git a/libcpp/configure b/libcpp/configure
index e3c546c..01e4462 100755
--- a/libcpp/configure
+++ b/libcpp/configure
@@ -612,7 +612,6 @@  USE_NLS
 ALLOCA
 LIBOBJS
 CXXDEPMODE
-CCDEPMODE
 DEPDIR
 am__leading_dot
 WERROR
@@ -623,7 +622,6 @@  warn
 AUTOHEADER
 AUTOCONF
 ACLOCAL
-ENABLE_BUILD_WITH_CXX
 EGREP
 GREP
 CPP
@@ -696,7 +694,6 @@  ac_subst_files=''
 ac_user_opts='
 enable_option_checking
 enable_largefile
-enable_build_with_cxx
 enable_werror_always
 with_gnu_ld
 enable_rpath
@@ -1332,7 +1329,6 @@  Optional Features:
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
   --disable-largefile     omit support for large files
-  --enable-build-with-cxx build with C++ compiler instead of C compiler
   --enable-werror-always  enable -Werror despite compiler version
   --disable-rpath         do not hardcode runtime library paths
   --enable-maintainer-mode enable rules only needed by maintainers
@@ -4541,17 +4537,6 @@  rm -rf conftest*
 fi
 
 
-# See if we are building gcc with C++.
-# Do this early so setting lang to C++ affects following tests
-# Check whether --enable-build-with-cxx was given.
-if test "${enable_build_with_cxx+set}" = set; then :
-  enableval=$enable_build_with_cxx; ENABLE_BUILD_WITH_CXX=$enableval
-else
-  ENABLE_BUILD_WITH_CXX=yes
-fi
-
-
-
 MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
 for ac_prog in aclocal
 do
@@ -4895,104 +4880,6 @@  DEPDIR="${am__leading_dot}deps"
 ac_config_commands="$ac_config_commands depdir"
 
 
-if test "$ENABLE_BUILD_WITH_CXX" = "no"; then
-depcc="$CC"   am_compiler_list=
-
-am_depcomp=$ac_aux_dir/depcomp
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_CC_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    if test $depmode = none; then break; fi
-
-    $as_echo "$as_me:$LINENO: trying $depmode" >&5
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "include sub/conftest.Po" > confmf
-
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    depcmd="depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c"
-    echo "| $depcmd" | sed -e 's/  */ /g' >&5
-    if env $depcmd > conftest.err 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po >>conftest.err 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po >>conftest.err 2>&1 &&
-       ${MAKE-make} -s -f confmf >>conftest.err 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_CC_dependencies_compiler_type=$depmode
-	$as_echo "$as_me:$LINENO: success" >&5
-        break
-      fi
-    fi
-    $as_echo "$as_me:$LINENO: failure, diagnostics are:" >&5
-    sed -e 's/^/| /' < conftest.err >&5
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-if test x${am_cv_CC_dependencies_compiler_type-none} = xnone
-then as_fn_error "no usable dependency style found" "$LINENO" 5
-else CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-fi
-
-else
 ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -5112,7 +4999,6 @@  else CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
 
 fi
 
-fi
 
 # Checks for header files.
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
@@ -6454,6 +6340,12 @@  fi
 
 # g++ on Solaris 10+ defines _XOPEN_SOURCE=600, which exposes a different
 # iconv() prototype.
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
 
       if test "X$prefix" = "XNONE"; then
     acl_final_prefix="$ac_default_prefix"
@@ -6995,13 +6887,6 @@  fi
   fi
 
 
-if test "$ENABLE_BUILD_WITH_CXX" = "yes"; then :
-  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
 
 
 
@@ -7157,169 +7042,12 @@  _ACEOF
 
   fi
 
-   ac_ext=c
+ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-else
-
-
-
-
-
-          am_save_CPPFLAGS="$CPPFLAGS"
-
-  for element in $INCICONV; do
-    haveit=
-    for x in $CPPFLAGS; do
-
-  acl_save_prefix="$prefix"
-  prefix="$acl_final_prefix"
-  acl_save_exec_prefix="$exec_prefix"
-  exec_prefix="$acl_final_exec_prefix"
-  eval x=\"$x\"
-  exec_prefix="$acl_save_exec_prefix"
-  prefix="$acl_save_prefix"
-
-      if test "X$x" = "X$element"; then
-        haveit=yes
-        break
-      fi
-    done
-    if test -z "$haveit"; then
-      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
-    fi
-  done
-
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
-$as_echo_n "checking for iconv... " >&6; }
-if test "${am_cv_func_iconv+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-
-    am_cv_func_iconv="no, consider installing GNU libiconv"
-    am_cv_lib_iconv=no
-    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
-       iconv(cd,NULL,NULL,NULL,NULL);
-       iconv_close(cd);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-    if test "$am_cv_func_iconv" != yes; then
-      am_save_LIBS="$LIBS"
-      LIBS="$LIBS $LIBICONV"
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
-         iconv(cd,NULL,NULL,NULL,NULL);
-         iconv_close(cd);
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  am_cv_lib_iconv=yes
-        am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-      LIBS="$am_save_LIBS"
-    fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
-$as_echo "$am_cv_func_iconv" >&6; }
-  if test "$am_cv_func_iconv" = yes; then
-
-$as_echo "#define HAVE_ICONV 1" >>confdefs.h
-
-  fi
-  if test "$am_cv_lib_iconv" = yes; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
-$as_echo_n "checking how to link with libiconv... " >&6; }
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
-$as_echo "$LIBICONV" >&6; }
-  else
-            CPPFLAGS="$am_save_CPPFLAGS"
-    LIBICONV=
-    LTLIBICONV=
-  fi
-
-
-
-  if test "$am_cv_func_iconv" = yes; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv declaration" >&5
-$as_echo_n "checking for iconv declaration... " >&6; }
-    if test "${am_cv_proto_iconv+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-#include <stdlib.h>
-#include <iconv.h>
-extern
-#ifdef __cplusplus
-"C"
-#endif
-#if defined(__STDC__) || defined(__cplusplus)
-size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
-#else
-size_t iconv();
-#endif
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  am_cv_proto_iconv_arg1=""
-else
-  am_cv_proto_iconv_arg1="const"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-      am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"
-fi
-
-    am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${ac_t:-
-         }$am_cv_proto_iconv" >&5
-$as_echo "${ac_t:-
-         }$am_cv_proto_iconv" >&6; }
-
-cat >>confdefs.h <<_ACEOF
-#define ICONV_CONST $am_cv_proto_iconv_arg1
-_ACEOF
-
-  fi
-
-fi
 
 # More defines and substitutions.
 PACKAGE="$PACKAGE_TARNAME"
diff --git a/libcpp/configure.ac b/libcpp/configure.ac
index 291f4b4..29bd8c5 100644
--- a/libcpp/configure.ac
+++ b/libcpp/configure.ac
@@ -17,14 +17,6 @@  AC_PROG_RANLIB
 AC_USE_SYSTEM_EXTENSIONS
 AC_SYS_LARGEFILE
 
-# See if we are building gcc with C++.
-# Do this early so setting lang to C++ affects following tests
-AC_ARG_ENABLE(build-with-cxx,
-[  --enable-build-with-cxx build with C++ compiler instead of C compiler],
-ENABLE_BUILD_WITH_CXX=$enableval,
-ENABLE_BUILD_WITH_CXX=yes)
-AC_SUBST(ENABLE_BUILD_WITH_CXX)
-
 MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
 AC_CHECK_PROGS([ACLOCAL], [aclocal], [$MISSING aclocal])
 AC_CHECK_PROGS([AUTOCONF], [autoconf], [$MISSING autoconf])
@@ -49,15 +41,11 @@  ACX_PROG_CC_WARNINGS_ARE_ERRORS([manual])
 
 # Dependency checking.
 ZW_CREATE_DEPDIR
-if test "$ENABLE_BUILD_WITH_CXX" = "no"; then
-ZW_PROG_COMPILER_DEPENDENCIES([CC])
-else
 AC_LANG_PUSH([C++])
 AC_COMPILE_IFELSE([[int i;]], [],
 		  [AC_MSG_ERROR([C++ compiler missing or inoperational])])
 AC_LANG_POP([C++])
 ZW_PROG_COMPILER_DEPENDENCIES([CXX])
-fi
 
 # Checks for header files.
 AC_HEADER_TIME
@@ -108,11 +96,9 @@  fi
 
 # g++ on Solaris 10+ defines _XOPEN_SOURCE=600, which exposes a different
 # iconv() prototype.
-AS_IF([test "$ENABLE_BUILD_WITH_CXX" = "yes"],
-  [AC_LANG_PUSH([C++])
-   AM_ICONV
-   AC_LANG_POP([C++])],
-  [AM_ICONV])
+AC_LANG_PUSH([C++])
+AM_ICONV
+AC_LANG_POP([C++])
 
 # More defines and substitutions.
 PACKAGE="$PACKAGE_TARNAME"