Message ID | 1334658946-7533-1-git-send-email-lauri.hintsala@bluegiga.com |
---|---|
State | Accepted |
Commit | ecb7be2985e130d1d3f7569f086cf50bfe60d337 |
Headers | show |
Dear Lauri Hintsala, > NAND support is not enabled by default because Eval Kit is not delivered > with NAND chip. To enable NAND support add CONFIG_CMD_NAND to board config. > > Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Acked-by: Marek Vasut <marex@denx.de> I think we can schedule it for .04 release as this is basically a fix? Fabio ? > --- > board/freescale/mx28evk/iomux.c | 21 +++++++++++++++++++++ > include/configs/mx28evk.h | 10 ++++++++++ > 2 files changed, 31 insertions(+), 0 deletions(-) > > diff --git a/board/freescale/mx28evk/iomux.c > b/board/freescale/mx28evk/iomux.c index 396761b..6587c45 100644 > --- a/board/freescale/mx28evk/iomux.c > +++ b/board/freescale/mx28evk/iomux.c > @@ -26,6 +26,7 @@ > #include <asm/arch/sys_proto.h> > > #define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) > +#define MUX_CONFIG_GPMI (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) > #define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) > #define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL) > #define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP) > @@ -55,6 +56,26 @@ const iomux_cfg_t iomux_setup[] = { > MX28_PAD_PWM3__GPIO_3_28 | > (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), > > +#ifdef CONFIG_NAND_MXS > + /* GPMI NAND */ > + MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI, > + MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI, > + MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI, > + MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI, > + MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI, > + MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI, > + MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI, > + MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI, > + MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI, > + MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI, > + MX28_PAD_GPMI_RDN__GPMI_RDN | > + (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP), > + MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI, > + MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI, > + MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI, > + MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI, > +#endif > + > /* FEC0 */ > MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET, > MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET, > diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h > index 02f3366..2a44baa 100644 > --- a/include/configs/mx28evk.h > +++ b/include/configs/mx28evk.h > @@ -148,6 +148,16 @@ > #endif > > /* > + * NAND Driver > + */ > +#ifdef CONFIG_CMD_NAND > +#define CONFIG_NAND_MXS > +#define CONFIG_SYS_MAX_NAND_DEVICE 1 > +#define CONFIG_SYS_NAND_BASE 0x60000000 > +#define CONFIG_SYS_NAND_5_ADDR_CYCLE > +#endif > + > +/* > * Ethernet on SOC (FEC) > */ > #ifdef CONFIG_CMD_NET Best regards, Marek Vasut
On 4/17/12, Marek Vasut <marex@denx.de> wrote: > Dear Lauri Hintsala, > >> NAND support is not enabled by default because Eval Kit is not delivered >> with NAND chip. To enable NAND support add CONFIG_CMD_NAND to board >> config. >> >> Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> > > Acked-by: Marek Vasut <marex@denx.de> > > I think we can schedule it for .04 release as this is basically a fix? Fabio > ? Looks good to me. My only suggestion (can be part of a separate patch) is to modify the mx28evk README and explain that mx28evk can also boot from NAND and explain the boot mode settings, etc. Thanks, Fabio Estevam
Dear Fabio Estevam, > On 4/17/12, Marek Vasut <marex@denx.de> wrote: > > Dear Lauri Hintsala, > > > >> NAND support is not enabled by default because Eval Kit is not delivered > >> with NAND chip. To enable NAND support add CONFIG_CMD_NAND to board > >> config. > >> > >> Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> > > > > Acked-by: Marek Vasut <marex@denx.de> > > > > I think we can schedule it for .04 release as this is basically a fix? > > Fabio ? > > Looks good to me. My only suggestion (can be part of a separate patch) > is to modify the mx28evk README and explain that mx28evk can also boot > from NAND and explain the boot mode settings, etc. Good idea, but let's do this in a separate patch :) > > Thanks, > > Fabio Estevam Best regards, Marek Vasut
On 17/04/2012 13:21, Marek Vasut wrote: > Dear Lauri Hintsala, > >> NAND support is not enabled by default because Eval Kit is not delivered >> with NAND chip. To enable NAND support add CONFIG_CMD_NAND to board config. >> >> Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> > > Acked-by: Marek Vasut <marex@denx.de> > > I think we can schedule it for .04 release as this is basically a fix? Fabio ? Well, this is not a fix because it adds a feature that is not yet supported. It should be deferred to the next release. Best regards, Stefano Babic
Dear Stefano Babic, > On 17/04/2012 13:21, Marek Vasut wrote: > > Dear Lauri Hintsala, > > > >> NAND support is not enabled by default because Eval Kit is not delivered > >> with NAND chip. To enable NAND support add CONFIG_CMD_NAND to board > >> config. > >> > >> Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> > > > > Acked-by: Marek Vasut <marex@denx.de> > > > > I think we can schedule it for .04 release as this is basically a fix? > > Fabio ? > > Well, this is not a fix because it adds a feature that is not yet > supported. It should be deferred to the next release. Ok, I won't object either way as it doesn't concern me that much ;-) > > Best regards, > Stefano Babic Best regards, Marek Vasut
Hi Stefano, On Tue, Apr 17, 2012 at 11:30 AM, Stefano Babic <sbabic@denx.de> wrote: > Well, this is not a fix because it adds a feature that is not yet > supported. It should be deferred to the next release. Can this be applied now?
Dear Fabio Estevam, > Hi Stefano, > > On Tue, Apr 17, 2012 at 11:30 AM, Stefano Babic <sbabic@denx.de> wrote: > > Well, this is not a fix because it adds a feature that is not yet > > supported. It should be deferred to the next release. > > Can this be applied now? Should be ... Best regards, Marek Vasut
Am 02/05/2012 19:26, schrieb Fabio Estevam: > Hi Stefano, > > On Tue, Apr 17, 2012 at 11:30 AM, Stefano Babic <sbabic@denx.de> wrote: > >> Well, this is not a fix because it adds a feature that is not yet >> supported. It should be deferred to the next release. > > Can this be applied now? > Yes, I will do it. Best regards, Stefano Babic
On 17/04/2012 12:35, Lauri Hintsala wrote: > NAND support is not enabled by default because Eval Kit is not delivered > with NAND chip. To enable NAND support add CONFIG_CMD_NAND to board config. > > Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> > --- Applied to u-boot-imx, thanks Best regards, Stefano Babic
diff --git a/board/freescale/mx28evk/iomux.c b/board/freescale/mx28evk/iomux.c index 396761b..6587c45 100644 --- a/board/freescale/mx28evk/iomux.c +++ b/board/freescale/mx28evk/iomux.c @@ -26,6 +26,7 @@ #include <asm/arch/sys_proto.h> #define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_GPMI (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) #define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) #define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL) #define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP) @@ -55,6 +56,26 @@ const iomux_cfg_t iomux_setup[] = { MX28_PAD_PWM3__GPIO_3_28 | (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), +#ifdef CONFIG_NAND_MXS + /* GPMI NAND */ + MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_RDN__GPMI_RDN | + (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP), + MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI, +#endif + /* FEC0 */ MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET, MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET, diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 02f3366..2a44baa 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -148,6 +148,16 @@ #endif /* + * NAND Driver + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_MXS +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x60000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#endif + +/* * Ethernet on SOC (FEC) */ #ifdef CONFIG_CMD_NET
NAND support is not enabled by default because Eval Kit is not delivered with NAND chip. To enable NAND support add CONFIG_CMD_NAND to board config. Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> --- board/freescale/mx28evk/iomux.c | 21 +++++++++++++++++++++ include/configs/mx28evk.h | 10 ++++++++++ 2 files changed, 31 insertions(+), 0 deletions(-)