Message ID | 1334175744-26707-1-git-send-email-festevam@gmail.com |
---|---|
State | Accepted |
Commit | bdb9f7604ddaffe623267df5c381353ac23a90a6 |
Headers | show |
On 11.04.2012 22:22, Fabio Estevam wrote: > There is a 'gpio_direction_output(87, 0);' call previously, so the GPIO direction is > already established. > > Use gpio_set_value() for changing the GPIO output then. > > Signed-off-by: Fabio Estevam<fabio.estevam@freescale.com> > --- > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c > index 1d09a72..2155d87 100644 > --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c > +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c > @@ -135,7 +135,7 @@ static void setup_iomux_enet(void) > > /* Need delay 10ms according to KSZ9021 spec */ > udelay(1000 * 10); > - gpio_direction_output(87, 1); /* GPIO 3-23 */ > + gpio_set_value(87, 1); /* GPIO 3-23 */ > > imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); > } Acked-by: Dirk Behme <dirk.behme@googlemail.com> Thanks Dirk
On 11/04/2012 22:22, Fabio Estevam wrote: > There is a 'gpio_direction_output(87, 0);' call previously, so the GPIO direction is > already established. > > Use gpio_set_value() for changing the GPIO output then. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- Applied to u-boot-imx, thanks. Best regards, Stefano Babic
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 1d09a72..2155d87 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -135,7 +135,7 @@ static void setup_iomux_enet(void) /* Need delay 10ms according to KSZ9021 spec */ udelay(1000 * 10); - gpio_direction_output(87, 1); /* GPIO 3-23 */ + gpio_set_value(87, 1); /* GPIO 3-23 */ imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); }
There is a 'gpio_direction_output(87, 0);' call previously, so the GPIO direction is already established. Use gpio_set_value() for changing the GPIO output then. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)