| Message ID | 20241012-b4-qcom-capsule-updates-v4-4-abd05f15255f@linaro.org |
|---|---|
| State | New |
| Delegated to: | Caleb Connolly |
| Headers | show |
| Series | qcom: implement capsule updates | expand |
On 12/10/2024 15:57, Caleb Connolly wrote: > Enable all the necessary options for capsule updates to work, as well as > a few additional EFI features. > > Capsule updates themselves are only enabled for the RB3 Gen 2, since the > exact details on where to flash U-Boot (or how to handle multiple boot > methods) has not been finalised for other boards. -----------------------/\ finalized > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > --- > configs/qcm6490_defconfig | 6 ++++++ > configs/qcom_defconfig | 8 +++++++- > 2 files changed, 13 insertions(+), 1 deletion(-) > > diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig > index 5ddc5ab3ef8c..ba26924da161 100644 > --- a/configs/qcm6490_defconfig > +++ b/configs/qcm6490_defconfig > @@ -18,4 +18,10 @@ CONFIG_DEBUG_UART_CLOCK=14745600 > CONFIG_TEXT_BASE=0x9fc00000 > CONFIG_REMAKE_ELF=y > > CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs6490-rb3gen2" > + > +# Enable capsule updates > +CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y > +CONFIG_EFI_CAPSULE_ON_DISK=y > +CONFIG_EFI_IGNORE_OSINDICATIONS=y > +CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y > diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig > index e7ed03ff0f24..4c8ff0e84372 100644 > --- a/configs/qcom_defconfig > +++ b/configs/qcom_defconfig > @@ -20,21 +20,24 @@ CONFIG_LOG_MAX_LEVEL=9 > CONFIG_LOG_DEFAULT_LEVEL=4 > # CONFIG_DISPLAY_CPUINFO is not set > CONFIG_DISPLAY_BOARDINFO_LATE=y > CONFIG_CMD_BOOTMENU=y > +CONFIG_CMD_NVEDIT_EFI=y > CONFIG_CMD_EEPROM=y > CONFIG_SYS_I2C_EEPROM_BUS=2 > CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 > CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 > # CONFIG_CMD_BIND is not set > CONFIG_CMD_CLK=y > +CONFIG_CMD_DFU=y > CONFIG_CMD_GPIO=y > CONFIG_CMD_I2C=y > CONFIG_CMD_MMC=y > CONFIG_CMD_UFS=y > CONFIG_CMD_USB=y > CONFIG_CMD_CAT=y > CONFIG_CMD_BMP=y > +CONFIG_CMD_EFIDEBUG=y > CONFIG_CMD_REGULATOR=y > CONFIG_CMD_LOG=y > CONFIG_OF_LIVE=y > CONFIG_USE_DEFAULT_ENV_FILE=y > @@ -44,15 +47,18 @@ CONFIG_CLK=y > CONFIG_CLK_QCOM_APQ8016=y > CONFIG_CLK_QCOM_APQ8096=y > CONFIG_CLK_QCOM_QCM2290=y > CONFIG_CLK_QCOM_QCS404=y > -CONFIG_CLK_QCOM_SC7280=y > CONFIG_CLK_QCOM_SDM845=y > CONFIG_CLK_QCOM_SM6115=y > CONFIG_CLK_QCOM_SM8150=y > CONFIG_CLK_QCOM_SM8250=y > CONFIG_CLK_QCOM_SM8550=y > CONFIG_CLK_QCOM_SM8650=y > +CONFIG_CLK_QCOM_SC7280=y > +CONFIG_DFU_MMC=y > +CONFIG_DFU_SCSI=y > +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000 > CONFIG_MSM_GPIO=y > CONFIG_QCOM_PMIC_GPIO=y > CONFIG_DM_I2C=y > CONFIG_SYS_I2C_QUP=y > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
On Sat, 12 Oct 2024 at 16:57, Caleb Connolly <caleb.connolly@linaro.org> wrote: > > Enable all the necessary options for capsule updates to work, as well as > a few additional EFI features. > > Capsule updates themselves are only enabled for the RB3 Gen 2, since the > exact details on where to flash U-Boot (or how to handle multiple boot > methods) has not been finalised for other boards. > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > --- > configs/qcm6490_defconfig | 6 ++++++ > configs/qcom_defconfig | 8 +++++++- > 2 files changed, 13 insertions(+), 1 deletion(-) > > diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig > index 5ddc5ab3ef8c..ba26924da161 100644 > --- a/configs/qcm6490_defconfig > +++ b/configs/qcm6490_defconfig > @@ -18,4 +18,10 @@ CONFIG_DEBUG_UART_CLOCK=14745600 > CONFIG_TEXT_BASE=0x9fc00000 > CONFIG_REMAKE_ELF=y > > CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs6490-rb3gen2" > + > +# Enable capsule updates > +CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y > +CONFIG_EFI_CAPSULE_ON_DISK=y > +CONFIG_EFI_IGNORE_OSINDICATIONS=y > +CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y > diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig > index e7ed03ff0f24..4c8ff0e84372 100644 > --- a/configs/qcom_defconfig > +++ b/configs/qcom_defconfig > @@ -20,21 +20,24 @@ CONFIG_LOG_MAX_LEVEL=9 > CONFIG_LOG_DEFAULT_LEVEL=4 > # CONFIG_DISPLAY_CPUINFO is not set > CONFIG_DISPLAY_BOARDINFO_LATE=y > CONFIG_CMD_BOOTMENU=y > +CONFIG_CMD_NVEDIT_EFI=y > CONFIG_CMD_EEPROM=y > CONFIG_SYS_I2C_EEPROM_BUS=2 > CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 > CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 > # CONFIG_CMD_BIND is not set > CONFIG_CMD_CLK=y > +CONFIG_CMD_DFU=y > CONFIG_CMD_GPIO=y > CONFIG_CMD_I2C=y > CONFIG_CMD_MMC=y > CONFIG_CMD_UFS=y > CONFIG_CMD_USB=y > CONFIG_CMD_CAT=y > CONFIG_CMD_BMP=y > +CONFIG_CMD_EFIDEBUG=y > CONFIG_CMD_REGULATOR=y > CONFIG_CMD_LOG=y > CONFIG_OF_LIVE=y > CONFIG_USE_DEFAULT_ENV_FILE=y > @@ -44,15 +47,18 @@ CONFIG_CLK=y > CONFIG_CLK_QCOM_APQ8016=y > CONFIG_CLK_QCOM_APQ8096=y > CONFIG_CLK_QCOM_QCM2290=y > CONFIG_CLK_QCOM_QCS404=y > -CONFIG_CLK_QCOM_SC7280=y > CONFIG_CLK_QCOM_SDM845=y > CONFIG_CLK_QCOM_SM6115=y > CONFIG_CLK_QCOM_SM8150=y > CONFIG_CLK_QCOM_SM8250=y > CONFIG_CLK_QCOM_SM8550=y > CONFIG_CLK_QCOM_SM8650=y > +CONFIG_CLK_QCOM_SC7280=y > +CONFIG_DFU_MMC=y > +CONFIG_DFU_SCSI=y > +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000 > CONFIG_MSM_GPIO=y > CONFIG_QCOM_PMIC_GPIO=y > CONFIG_DM_I2C=y > CONFIG_SYS_I2C_QUP=y > > -- > 2.46.2 > Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
On 14/10/2024 08:53, Neil Armstrong wrote: > On 12/10/2024 15:57, Caleb Connolly wrote: >> Enable all the necessary options for capsule updates to work, as well as >> a few additional EFI features. >> >> Capsule updates themselves are only enabled for the RB3 Gen 2, since the >> exact details on where to flash U-Boot (or how to handle multiple boot >> methods) has not been finalised for other boards. > > -----------------------/\ finalized Finalised is the correct spelling in British English :P Is there a rule about this? XD Thanks for the review! > >> >> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> >> --- >> configs/qcm6490_defconfig | 6 ++++++ >> configs/qcom_defconfig | 8 +++++++- >> 2 files changed, 13 insertions(+), 1 deletion(-) >> >> diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig >> index 5ddc5ab3ef8c..ba26924da161 100644 >> --- a/configs/qcm6490_defconfig >> +++ b/configs/qcm6490_defconfig >> @@ -18,4 +18,10 @@ CONFIG_DEBUG_UART_CLOCK=14745600 >> CONFIG_TEXT_BASE=0x9fc00000 >> CONFIG_REMAKE_ELF=y >> CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs6490-rb3gen2" >> + >> +# Enable capsule updates >> +CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y >> +CONFIG_EFI_CAPSULE_ON_DISK=y >> +CONFIG_EFI_IGNORE_OSINDICATIONS=y >> +CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y >> diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig >> index e7ed03ff0f24..4c8ff0e84372 100644 >> --- a/configs/qcom_defconfig >> +++ b/configs/qcom_defconfig >> @@ -20,21 +20,24 @@ CONFIG_LOG_MAX_LEVEL=9 >> CONFIG_LOG_DEFAULT_LEVEL=4 >> # CONFIG_DISPLAY_CPUINFO is not set >> CONFIG_DISPLAY_BOARDINFO_LATE=y >> CONFIG_CMD_BOOTMENU=y >> +CONFIG_CMD_NVEDIT_EFI=y >> CONFIG_CMD_EEPROM=y >> CONFIG_SYS_I2C_EEPROM_BUS=2 >> CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 >> CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 >> # CONFIG_CMD_BIND is not set >> CONFIG_CMD_CLK=y >> +CONFIG_CMD_DFU=y >> CONFIG_CMD_GPIO=y >> CONFIG_CMD_I2C=y >> CONFIG_CMD_MMC=y >> CONFIG_CMD_UFS=y >> CONFIG_CMD_USB=y >> CONFIG_CMD_CAT=y >> CONFIG_CMD_BMP=y >> +CONFIG_CMD_EFIDEBUG=y >> CONFIG_CMD_REGULATOR=y >> CONFIG_CMD_LOG=y >> CONFIG_OF_LIVE=y >> CONFIG_USE_DEFAULT_ENV_FILE=y >> @@ -44,15 +47,18 @@ CONFIG_CLK=y >> CONFIG_CLK_QCOM_APQ8016=y >> CONFIG_CLK_QCOM_APQ8096=y >> CONFIG_CLK_QCOM_QCM2290=y >> CONFIG_CLK_QCOM_QCS404=y >> -CONFIG_CLK_QCOM_SC7280=y >> CONFIG_CLK_QCOM_SDM845=y >> CONFIG_CLK_QCOM_SM6115=y >> CONFIG_CLK_QCOM_SM8150=y >> CONFIG_CLK_QCOM_SM8250=y >> CONFIG_CLK_QCOM_SM8550=y >> CONFIG_CLK_QCOM_SM8650=y >> +CONFIG_CLK_QCOM_SC7280=y >> +CONFIG_DFU_MMC=y >> +CONFIG_DFU_SCSI=y >> +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000 >> CONFIG_MSM_GPIO=y >> CONFIG_QCOM_PMIC_GPIO=y >> CONFIG_DM_I2C=y >> CONFIG_SYS_I2C_QUP=y >> > > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
On 17/10/2024 15:19, Caleb Connolly wrote: > > > On 14/10/2024 08:53, Neil Armstrong wrote: >> On 12/10/2024 15:57, Caleb Connolly wrote: >>> Enable all the necessary options for capsule updates to work, as well as >>> a few additional EFI features. >>> >>> Capsule updates themselves are only enabled for the RB3 Gen 2, since the >>> exact details on where to flash U-Boot (or how to handle multiple boot >>> methods) has not been finalised for other boards. >> >> -----------------------/\ finalized > > Finalised is the correct spelling in British English :P Ah Ah sorry, my mailer spell checked is in English USA, sorry :-p Adding the british one right now! Since you're a certified British, I'll trust you! Neil > > Is there a rule about this? XD > > Thanks for the review! >> >>> >>> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> >>> --- >>> configs/qcm6490_defconfig | 6 ++++++ >>> configs/qcom_defconfig | 8 +++++++- >>> 2 files changed, 13 insertions(+), 1 deletion(-) >>> >>> diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig >>> index 5ddc5ab3ef8c..ba26924da161 100644 >>> --- a/configs/qcm6490_defconfig >>> +++ b/configs/qcm6490_defconfig >>> @@ -18,4 +18,10 @@ CONFIG_DEBUG_UART_CLOCK=14745600 >>> CONFIG_TEXT_BASE=0x9fc00000 >>> CONFIG_REMAKE_ELF=y >>> CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs6490-rb3gen2" >>> + >>> +# Enable capsule updates >>> +CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y >>> +CONFIG_EFI_CAPSULE_ON_DISK=y >>> +CONFIG_EFI_IGNORE_OSINDICATIONS=y >>> +CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y >>> diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig >>> index e7ed03ff0f24..4c8ff0e84372 100644 >>> --- a/configs/qcom_defconfig >>> +++ b/configs/qcom_defconfig >>> @@ -20,21 +20,24 @@ CONFIG_LOG_MAX_LEVEL=9 >>> CONFIG_LOG_DEFAULT_LEVEL=4 >>> # CONFIG_DISPLAY_CPUINFO is not set >>> CONFIG_DISPLAY_BOARDINFO_LATE=y >>> CONFIG_CMD_BOOTMENU=y >>> +CONFIG_CMD_NVEDIT_EFI=y >>> CONFIG_CMD_EEPROM=y >>> CONFIG_SYS_I2C_EEPROM_BUS=2 >>> CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 >>> CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 >>> # CONFIG_CMD_BIND is not set >>> CONFIG_CMD_CLK=y >>> +CONFIG_CMD_DFU=y >>> CONFIG_CMD_GPIO=y >>> CONFIG_CMD_I2C=y >>> CONFIG_CMD_MMC=y >>> CONFIG_CMD_UFS=y >>> CONFIG_CMD_USB=y >>> CONFIG_CMD_CAT=y >>> CONFIG_CMD_BMP=y >>> +CONFIG_CMD_EFIDEBUG=y >>> CONFIG_CMD_REGULATOR=y >>> CONFIG_CMD_LOG=y >>> CONFIG_OF_LIVE=y >>> CONFIG_USE_DEFAULT_ENV_FILE=y >>> @@ -44,15 +47,18 @@ CONFIG_CLK=y >>> CONFIG_CLK_QCOM_APQ8016=y >>> CONFIG_CLK_QCOM_APQ8096=y >>> CONFIG_CLK_QCOM_QCM2290=y >>> CONFIG_CLK_QCOM_QCS404=y >>> -CONFIG_CLK_QCOM_SC7280=y >>> CONFIG_CLK_QCOM_SDM845=y >>> CONFIG_CLK_QCOM_SM6115=y >>> CONFIG_CLK_QCOM_SM8150=y >>> CONFIG_CLK_QCOM_SM8250=y >>> CONFIG_CLK_QCOM_SM8550=y >>> CONFIG_CLK_QCOM_SM8650=y >>> +CONFIG_CLK_QCOM_SC7280=y >>> +CONFIG_DFU_MMC=y >>> +CONFIG_DFU_SCSI=y >>> +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000 >>> CONFIG_MSM_GPIO=y >>> CONFIG_QCOM_PMIC_GPIO=y >>> CONFIG_DM_I2C=y >>> CONFIG_SYS_I2C_QUP=y >>> >> >> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> >
diff --git a/configs/qcm6490_defconfig b/configs/qcm6490_defconfig index 5ddc5ab3ef8c..ba26924da161 100644 --- a/configs/qcm6490_defconfig +++ b/configs/qcm6490_defconfig @@ -18,4 +18,10 @@ CONFIG_DEBUG_UART_CLOCK=14745600 CONFIG_TEXT_BASE=0x9fc00000 CONFIG_REMAKE_ELF=y CONFIG_DEFAULT_DEVICE_TREE="qcom/qcs6490-rb3gen2" + +# Enable capsule updates +CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y +CONFIG_EFI_CAPSULE_ON_DISK=y +CONFIG_EFI_IGNORE_OSINDICATIONS=y +CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig index e7ed03ff0f24..4c8ff0e84372 100644 --- a/configs/qcom_defconfig +++ b/configs/qcom_defconfig @@ -20,21 +20,24 @@ CONFIG_LOG_MAX_LEVEL=9 CONFIG_LOG_DEFAULT_LEVEL=4 # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_BOOTMENU=y +CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_EEPROM=y CONFIG_SYS_I2C_EEPROM_BUS=2 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 # CONFIG_CMD_BIND is not set CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_UFS=y CONFIG_CMD_USB=y CONFIG_CMD_CAT=y CONFIG_CMD_BMP=y +CONFIG_CMD_EFIDEBUG=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_LOG=y CONFIG_OF_LIVE=y CONFIG_USE_DEFAULT_ENV_FILE=y @@ -44,15 +47,18 @@ CONFIG_CLK=y CONFIG_CLK_QCOM_APQ8016=y CONFIG_CLK_QCOM_APQ8096=y CONFIG_CLK_QCOM_QCM2290=y CONFIG_CLK_QCOM_QCS404=y -CONFIG_CLK_QCOM_SC7280=y CONFIG_CLK_QCOM_SDM845=y CONFIG_CLK_QCOM_SM6115=y CONFIG_CLK_QCOM_SM8150=y CONFIG_CLK_QCOM_SM8250=y CONFIG_CLK_QCOM_SM8550=y CONFIG_CLK_QCOM_SM8650=y +CONFIG_CLK_QCOM_SC7280=y +CONFIG_DFU_MMC=y +CONFIG_DFU_SCSI=y +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x200000 CONFIG_MSM_GPIO=y CONFIG_QCOM_PMIC_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_QUP=y
Enable all the necessary options for capsule updates to work, as well as a few additional EFI features. Capsule updates themselves are only enabled for the RB3 Gen 2, since the exact details on where to flash U-Boot (or how to handle multiple boot methods) has not been finalised for other boards. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- configs/qcm6490_defconfig | 6 ++++++ configs/qcom_defconfig | 8 +++++++- 2 files changed, 13 insertions(+), 1 deletion(-)