[v2,3/3] hwmon: (pmbus/tps25990): add initial support

Add initial support for the Texas Instruments TPS25990 eFuse.
This adds the basic PMBUS telemetry support for the device.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 Documentation/hwmon/index.rst    |   1 +
 Documentation/hwmon/tps25990.rst | 148 ++++++++++++++
 drivers/hwmon/pmbus/Kconfig      |  17 ++
 drivers/hwmon/pmbus/Makefile     |   1 +
 drivers/hwmon/pmbus/tps25990.c   | 427 +++++++++++++++++++++++++++++++++++++++
 5 files changed, 594 insertions(+)

Hi Jerome,

On 20/09/24 22:26, Jerome Brunet wrote:
> Add initial support for the Texas Instruments TPS25990 eFuse.
> This adds the basic PMBUS telemetry support for the device.
> 
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
>   Documentation/hwmon/index.rst    |   1 +
>   Documentation/hwmon/tps25990.rst | 148 ++++++++++++++
>   drivers/hwmon/pmbus/Kconfig      |  17 ++
>   drivers/hwmon/pmbus/Makefile     |   1 +
>   drivers/hwmon/pmbus/tps25990.c   | 427 +++++++++++++++++++++++++++++++++++++++
>   5 files changed, 594 insertions(+)
> 
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index ea3b5be8fe4f..205ed31c66ff 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -234,6 +234,7 @@ Hardware Monitoring Kernel Drivers
>      tmp464
>      tmp513
>      tps23861
> +   tps25990
>      tps40422
>      tps53679
>      tps546d24
> diff --git a/Documentation/hwmon/tps25990.rst b/Documentation/hwmon/tps25990.rst
> new file mode 100644
> index 000000000000..ed9e74d43e2c
> --- /dev/null
> +++ b/Documentation/hwmon/tps25990.rst
> @@ -0,0 +1,148 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver tps25990
> +======================
> +
> +Supported chips:
> +
> +  * TI TPS25990
> +
> +    Prefix: 'tps25990'
> +
> +  * Datasheet
> +
> +    Publicly available at Texas Instruments website: https://www.ti.com/lit/gpn/tps25990
> +
> +Author:
> +
> +	Jerome Brunet <jbrunet@baylibre.com>
> +
> +Description
> +-----------
> +
> +This driver implements support for TI TPS25990 eFuse.
> +This is an integrated, high-current circuit protection and power
> +management device with PMBUS interface
> +
> +Device compliant with:
> +
> +- PMBus rev 1.3 interface.
> +
> +Device supports direct format for reading input voltages,
> +output voltage, input current, input power and temperature.
> +
> +Due to the specificities of the chip, all history reset attributes
> +are tied together. Resetting the history of a sensor, resets the
> +history of all the sensors.
> +
> +The driver exports the following attributes via the 'sysfs' files
> +for input current:
> +
> +**curr1_average**
> +
> +**curr1_crit**
> +
> +**curr1_crit_alarm**
> +
> +**curr1_highest**
> +
> +**curr1_input**
> +
> +**curr1_label**
> +
> +**curr1_max**
> +
> +**curr1_max_alarm**
> +
> +**curr1_reset_history**
> +
> +The driver provides the following attributes for main input voltage:
> +
> +**in1_average**
> +
> +**in1_crit**
> +
> +**in1_crit_alarm**
> +
> +**in1_highest**
> +
> +**in1_input**
> +
> +**in1_label**
> +
> +**in1_lcrit**
> +
> +**in1_lcrit_alarm**
> +
> +**in1_lowest**
> +
> +**in1_max**
> +
> +**in1_max_alarm**
> +
> +**in1_min**
> +
> +**in1_min_alarm**
> +
> +**in1_reset_history**
> +
> +The driver provides the following attributes for auxiliary input voltage:
> +
> +**in2_input**
> +
> +**in2_label**
> +
> +The driver provides the following attributes for output voltage:
> +
> +**in3_average**
> +
> +**in3_input**
> +
> +**in3_label**
> +
> +**in3_lowest**
> +
> +**in3_min**
> +
> +**in3_min_alarm**
> +
> +**in3_reset_history**
> +
> +The driver provides the following attributes for input power:
> +
> +**power1_alarm**
> +
> +**power1_average**
> +
> +**power1_input**
> +
> +**power1_input_highest**
> +
> +**power1_label**
> +
> +**power1_max**
> +
> +**power1_reset_history**
> +
> +The driver provides the following attributes for temperature:
> +
> +**temp1_average**
> +
> +**temp1_crit**
> +
> +**temp1_crit_alarm**
> +
> +**temp1_highest**
> +
> +**temp1_input**
> +
> +**temp1_max**
> +
> +**temp1_max_alarm**
> +
> +**temp1_reset_history**
> +
> +The driver provides the following attributes for sampling:
> +
> +**samples**
> +
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index a4f02cad92fd..a3fd442e0277 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -510,6 +510,23 @@ config SENSORS_TDA38640_REGULATOR
>   	  If you say yes here you get regulator support for Infineon
>   	  TDA38640 as regulator.
>   
> +config SENSORS_TPS25990
> +	tristate "TI TPS25990"
> +	help
> +	  If you say yes here you get hardware monitoring support for TI
> +	  TPS25990.
> +
> +	  This driver can also be built as a module. If so, the module will
> +	  be called tps25990.
> +
> +config SENSORS_TPS25990_REGULATOR
> +	bool "Regulator support for TPS25990 and compatibles"
> +	depends on SENSORS_TPS25990 && REGULATOR
> +	default SENSORS_TPS25990
> +	help
> +	  If you say yes here you get regulator support for Texas Instruments
> +	  TPS25990.
> +
>   config SENSORS_TPS40422
>   	tristate "TI TPS40422"
>   	help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index d00bcc758b97..3d3183f8d2a7 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -51,6 +51,7 @@ obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
>   obj-$(CONFIG_SENSORS_Q54SJ108A2)	+= q54sj108a2.o
>   obj-$(CONFIG_SENSORS_STPDDC60)	+= stpddc60.o
>   obj-$(CONFIG_SENSORS_TDA38640)	+= tda38640.o
> +obj-$(CONFIG_SENSORS_TPS25990)	+= tps25990.o
>   obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
>   obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
>   obj-$(CONFIG_SENSORS_TPS546D24)	+= tps546d24.o
> diff --git a/drivers/hwmon/pmbus/tps25990.c b/drivers/hwmon/pmbus/tps25990.c
> new file mode 100644
> index 000000000000..03848d671c10
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/tps25990.c
> @@ -0,0 +1,427 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (c) 2024 BayLibre, SAS.
> +// Author: Jerome Brunet <jbrunet@baylibre.com>
> +
> +#include <linux/debugfs.h>
> +#include <linux/err.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#include "pmbus.h"
> +
> +#define TPS25990_READ_VAUX		0xd0
> +#define TPS25990_READ_VIN_MIN		0xd1
> +#define TPS25990_READ_VIN_PEAK		0xd2
> +#define TPS25990_READ_IIN_PEAK		0xd4
> +#define TPS25990_READ_PIN_PEAK		0xd5
> +#define TPS25990_READ_TEMP_AVG		0xd6
> +#define TPS25990_READ_TEMP_PEAK		0xd7
> +#define TPS25990_READ_VOUT_MIN		0xda
> +#define TPS25990_READ_VIN_AVG		0xdc
> +#define TPS25990_READ_VOUT_AVG		0xdd
> +#define TPS25990_READ_IIN_AVG		0xde
> +#define TPS25990_READ_PIN_AVG		0xdf
> +#define TPS25990_VIREF			0xe0
> +#define TPS25990_PK_MIN_AVG		0xea
> +#define  PK_MIN_AVG_RST_PEAK		BIT(7)
> +#define  PK_MIN_AVG_RST_AVG		BIT(6)
> +#define  PK_MIN_AVG_RST_MIN		BIT(5)
> +#define  PK_MIN_AVG_AVG_CNT		GENMASK(2, 0)
> +#define TPS25990_MFR_WRITE_PROTECT	0xf8
> +#define  TPS25990_UNLOCKED		BIT(7)
> +
> +#define TPS25990_8B_SHIFT		2
> +#define TPS25990_VIN_OVF_NUM		525100
> +#define TPS25990_VIN_OVF_DIV		10163
> +#define TPS25990_VIN_OVF_OFF		155
> +#define TPS25990_IIN_OCF_NUM		953800
> +#define TPS25990_IIN_OCF_DIV		129278
> +#define TPS25990_IIN_OCF_OFF		157
> +
> +#define PK_MIN_AVG_RST_MASK		(PK_MIN_AVG_RST_PEAK | \
> +					 PK_MIN_AVG_RST_AVG  | \
> +					 PK_MIN_AVG_RST_MIN)
> +
> +/*
> + * Arbitrary default Rimon value: 1kOhm
> + * This correspond to an overcurrent limit of 55A, close to the specified limit
> + * of un-stacked TPS25990 and makes further calculation easier to setup in
> + * sensor.conf, if necessary
> + */
> +#define TPS25990_DEFAULT_RIMON		1000000000
> +
> +static void tps25990_set_m(int *m, u32 rimon)
> +{
> +	u64 val = ((u64)*m) * rimon;
> +
> +	/* Make sure m fits the s32 type */
> +	*m = DIV_ROUND_CLOSEST_ULL(val, 1000000);
> +}
> +
> +static int tps25990_mfr_write_protect_set(struct i2c_client *client,
> +					  u8 protect)
> +{
> +	/*
> +	 * The chip has a single protection mode, set it regardless of
> +	 * the specific protection requested
> +	 */
> +	return pmbus_write_byte_data(client, -1, TPS25990_MFR_WRITE_PROTECT,
> +				     protect ? 0x0 : 0xa2);
> +}
> +
> +static int tps25990_mfr_write_protect_get(struct i2c_client *client)
> +{
> +	int ret = pmbus_read_byte_data(client, -1, TPS25990_MFR_WRITE_PROTECT);
> +
> +	if (ret < 0)
> +		return ret;
> +
> +	return (ret & TPS25990_UNLOCKED) ? 0 : PB_WP_ALL;
> +}
> +
> +static int tps25990_read_word_data(struct i2c_client *client,
> +				   int page, int phase, int reg)
> +{
> +	int ret;
> +
> +	switch (reg) {
> +	case PMBUS_VIRT_READ_VIN_MAX:
> +		ret = pmbus_read_word_data(client, page, phase,
> +					   TPS25990_READ_VIN_PEAK);
> +		break;
> +
> +	case PMBUS_VIRT_READ_VIN_MIN:
> +		ret = pmbus_read_word_data(client, page, phase,
> +					   TPS25990_READ_VIN_MIN);
> +		break;
> +
> +	case PMBUS_VIRT_READ_VIN_AVG:
> +		ret = pmbus_read_word_data(client, page, phase,
> +					   TPS25990_READ_VIN_AVG);
> +		break;
> +
> +	case PMBUS_VIRT_READ_VOUT_MIN:
> +		ret = pmbus_read_word_data(client, page, phase,
> +					   TPS25990_READ_VOUT_MIN);
> +		break;
> +
> +	case PMBUS_VIRT_READ_VOUT_AVG:
> +		ret = pmbus_read_word_data(client, page, phase,
> +					   TPS25990_READ_VOUT_AVG);
> +		break;
> +
> +	case PMBUS_VIRT_READ_IIN_AVG:
> +		ret = pmbus_read_word_data(client, page, phase,
> +					   TPS25990_READ_IIN_AVG);
> +		break;
> +
> +	case PMBUS_VIRT_READ_IIN_MAX:
> +		return TPS25990_READ_IIN_PEAK;
> +		ret = pmbus_read_word_data(client, page, phase,
> +					   TPS25990_READ_IIN_PEAK);
> +		break;
> +
> +	case PMBUS_VIRT_READ_TEMP_AVG:
> +		ret = pmbus_read_word_data(client, page, phase,
> +					   TPS25990_READ_TEMP_AVG);
> +		break;
> +
> +	case PMBUS_VIRT_READ_TEMP_MAX:
> +		ret = pmbus_read_word_data(client, page, phase,
> +					   TPS25990_READ_TEMP_PEAK);
> +		break;
> +
> +	case PMBUS_VIRT_READ_PIN_AVG:
> +		ret = pmbus_read_word_data(client, page, phase,
> +					   TPS25990_READ_PIN_AVG);
> +		break;
> +
> +	case PMBUS_VIRT_READ_PIN_MAX:
> +		ret = pmbus_read_word_data(client, page, phase,
> +					   TPS25990_READ_PIN_PEAK);
> +		break;
> +
> +	case PMBUS_VIRT_READ_VMON:
> +		ret = pmbus_read_word_data(client, page, phase,
> +					   TPS25990_READ_VAUX);
> +		break;
> +
> +	case PMBUS_VIN_UV_WARN_LIMIT:
> +	case PMBUS_VIN_UV_FAULT_LIMIT:
> +	case PMBUS_VIN_OV_WARN_LIMIT:
> +	case PMBUS_VOUT_UV_WARN_LIMIT:
> +	case PMBUS_IIN_OC_WARN_LIMIT:
> +	case PMBUS_OT_WARN_LIMIT:
> +	case PMBUS_OT_FAULT_LIMIT:
> +	case PMBUS_PIN_OP_WARN_LIMIT:
> +		/*
> +		 * These registers provide an 8 bits value instead of a
> +		 * 10bits one. Just shifting twice the register value is
> +		 * enough to make the sensor type conversion work, even
> +		 * if the datasheet provides different m, b and R for
> +		 * those.
> +		 */
> +		ret = pmbus_read_word_data(client, page, phase, reg);
> +		if (ret < 0)
> +			break;
> +		ret <<= TPS25990_8B_SHIFT;
> +		break;
> +
> +	case PMBUS_VIN_OV_FAULT_LIMIT:
> +		ret = pmbus_read_word_data(client, page, phase, reg);
> +		if (ret < 0)
> +			break;
> +		ret = DIV_ROUND_CLOSEST(ret * TPS25990_VIN_OVF_NUM,
> +					TPS25990_VIN_OVF_DIV);
> +		ret += TPS25990_VIN_OVF_OFF;
> +		break;
> +
> +	case PMBUS_IIN_OC_FAULT_LIMIT:
> +		/*
> +		 * VIREF directly sets the over-current limit at which the eFuse
> +		 * will turn the FET off and trigger a fault. Expose it through
> +		 * this generic property instead of a manufacturer specific one.
> +		 */
> +		ret = pmbus_read_byte_data(client, page, TPS25990_VIREF);
> +		if (ret < 0)
> +			break;
> +		ret = DIV_ROUND_CLOSEST(ret * TPS25990_IIN_OCF_NUM,
> +					TPS25990_IIN_OCF_DIV);
> +		ret += TPS25990_IIN_OCF_OFF;
> +		break;
> +
> +	case PMBUS_VIRT_SAMPLES:
> +		ret = pmbus_read_byte_data(client, page, TPS25990_PK_MIN_AVG);
> +		if (ret < 0)
> +			break;
> +		ret = 1 << FIELD_GET(PK_MIN_AVG_AVG_CNT, ret);
> +		break;
> +
> +	case PMBUS_VIRT_RESET_TEMP_HISTORY:
> +	case PMBUS_VIRT_RESET_VIN_HISTORY:
> +	case PMBUS_VIRT_RESET_IIN_HISTORY:
> +	case PMBUS_VIRT_RESET_PIN_HISTORY:
> +	case PMBUS_VIRT_RESET_VOUT_HISTORY:
> +		ret = 0;
> +		break;
> +
> +	default:
> +		ret = -ENODATA;
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +static int tps25990_write_word_data(struct i2c_client *client,
> +				    int page, int reg, u16 value)
> +{
> +	int ret;
> +
> +	switch (reg) {
> +	case PMBUS_VIN_UV_WARN_LIMIT:
> +	case PMBUS_VIN_UV_FAULT_LIMIT:
> +	case PMBUS_VIN_OV_WARN_LIMIT:
> +	case PMBUS_VOUT_UV_WARN_LIMIT:
> +	case PMBUS_IIN_OC_WARN_LIMIT:
> +	case PMBUS_OT_WARN_LIMIT:
> +	case PMBUS_OT_FAULT_LIMIT:
> +	case PMBUS_PIN_OP_WARN_LIMIT:
> +		value >>= TPS25990_8B_SHIFT;
> +		value = clamp_val(value, 0, 0xff);
> +		ret = pmbus_write_word_data(client, page, reg, value);
> +		break;
> +
> +	case PMBUS_VIN_OV_FAULT_LIMIT:
> +		value -= TPS25990_VIN_OVF_OFF;
> +		value = DIV_ROUND_CLOSEST(((unsigned int)value) * TPS25990_VIN_OVF_DIV,
> +					  TPS25990_VIN_OVF_NUM);
> +		value = clamp_val(value, 0, 0xf);
> +		ret = pmbus_write_word_data(client, page, reg, value);
> +		break;
> +
> +	case PMBUS_IIN_OC_FAULT_LIMIT:
> +		value -= TPS25990_IIN_OCF_OFF;
> +		value = DIV_ROUND_CLOSEST(((unsigned int)value) * TPS25990_IIN_OCF_DIV,
> +					TPS25990_IIN_OCF_NUM);
> +		value = clamp_val(value, 0, 0x3f);
> +		ret = pmbus_write_byte_data(client, page, TPS25990_VIREF, value);
> +		break;
> +
> +	case PMBUS_VIRT_SAMPLES:
> +		value = clamp_val(value, 1, 1 << PK_MIN_AVG_AVG_CNT);
> +		value = ilog2(value);
> +		ret = pmbus_update_byte_data(client, page, TPS25990_PK_MIN_AVG,
> +					     PK_MIN_AVG_AVG_CNT,
> +					     FIELD_PREP(PK_MIN_AVG_AVG_CNT, value));
> +		break;
> +
> +	case PMBUS_VIRT_RESET_TEMP_HISTORY:
> +	case PMBUS_VIRT_RESET_VIN_HISTORY:
> +	case PMBUS_VIRT_RESET_IIN_HISTORY:
> +	case PMBUS_VIRT_RESET_PIN_HISTORY:
> +	case PMBUS_VIRT_RESET_VOUT_HISTORY:
> +		/*
> +		 * TPS25990 has history resets based on MIN/AVG/PEAK instead of per
> +		 * sensor type. Exposing this quirk in hwmon is not desirable so
> +		 * reset MIN, AVG and PEAK together. Even is there effectively only
> +		 * one reset, which resets everything, expose the 5 entries so
> +		 * userspace is not required map a sensor type to another to trigger
> +		 * a reset
> +		 */
> +		ret = pmbus_update_byte_data(client, 0, TPS25990_PK_MIN_AVG,
> +					     PK_MIN_AVG_RST_MASK,
> +					     PK_MIN_AVG_RST_MASK);
> +		break;
> +
> +	default:
> +		ret = -ENODATA;
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +static int tps25990_read_byte_data(struct i2c_client *client,
> +				   int page, int reg)
> +{
> +	int ret;
> +
> +	switch (reg) {
> +	case PMBUS_WRITE_PROTECT:
> +		ret = tps25990_mfr_write_protect_get(client);
> +		break;
> +
> +	default:
> +		ret = -ENODATA;
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +static int tps25990_write_byte_data(struct i2c_client *client,
> +				    int page, int reg, u8 byte)
> +{
> +	int ret;
> +
> +	switch (reg) {
> +	case PMBUS_WRITE_PROTECT:
> +		ret = tps25990_mfr_write_protect_set(client, byte);
> +		break;
> +
> +	default:
> +		ret = -ENODATA;
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
> +#if IS_ENABLED(CONFIG_SENSORS_TPS25990_REGULATOR)
> +static const struct regulator_desc tps25990_reg_desc[] = {
> +	PMBUS_REGULATOR_ONE("vout"),
> +};
> +#endif
> +
> +static const struct pmbus_driver_info tps25990_base_info = {
> +	.pages = 1,
> +	.format[PSC_VOLTAGE_IN] = direct,
> +	.m[PSC_VOLTAGE_IN] = 5251,
> +	.b[PSC_VOLTAGE_IN] = 0,
> +	.R[PSC_VOLTAGE_IN] = -2,
> +	.format[PSC_VOLTAGE_OUT] = direct,
> +	.m[PSC_VOLTAGE_OUT] = 5251,
> +	.b[PSC_VOLTAGE_OUT] = 0,
> +	.R[PSC_VOLTAGE_OUT] = -2,
> +	.format[PSC_TEMPERATURE] = direct,
> +	.m[PSC_TEMPERATURE] = 140,
> +	.b[PSC_TEMPERATURE] = 32100,
> +	.R[PSC_TEMPERATURE] = -2,
> +	/*
> +	 * Current and Power measurement depends on the ohm value
> +	 * of Rimon. m is multiplied by 1000 below to have an integer
> +	 * and -3 is added to R to compensate.
> +	 */
> +	.format[PSC_CURRENT_IN] = direct,
> +	.m[PSC_CURRENT_IN] = 9538,
> +	.b[PSC_CURRENT_IN] = 0,
> +	.R[PSC_CURRENT_IN] = -6,
> +	.format[PSC_POWER] = direct,
> +	.m[PSC_POWER] = 4901,
> +	.b[PSC_POWER] = 0,
> +	.R[PSC_POWER] = -7,
> +	.func[0] = (PMBUS_HAVE_VIN |
> +		    PMBUS_HAVE_VOUT |
> +		    PMBUS_HAVE_VMON |
> +		    PMBUS_HAVE_IIN |
> +		    PMBUS_HAVE_PIN |
> +		    PMBUS_HAVE_TEMP |
> +		    PMBUS_HAVE_STATUS_VOUT |
> +		    PMBUS_HAVE_STATUS_IOUT |
> +		    PMBUS_HAVE_STATUS_INPUT |
> +		    PMBUS_HAVE_STATUS_TEMP |
> +		    PMBUS_HAVE_SAMPLES),
> +	.read_word_data = tps25990_read_word_data,
> +	.write_word_data = tps25990_write_word_data,
> +	.read_byte_data = tps25990_read_byte_data,
> +	.write_byte_data = tps25990_write_byte_data,
> +
> +#if IS_ENABLED(CONFIG_SENSORS_TPS25990_REGULATOR)
> +	.reg_desc = tps25990_reg_desc,
> +	.num_regulators = ARRAY_SIZE(tps25990_reg_desc),
> +#endif
> +};
> +
> +static const struct i2c_device_id tps25990_i2c_id[] = {
> +	{ "tps25990" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, tps25990_i2c_id);
> +
> +static const struct of_device_id tps25990_of_match[] = {
> +	{ .compatible = "ti,tps25990" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, tps25990_of_match);
> +
> +static int tps25990_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct pmbus_driver_info *info;
> +	u32 rimon = TPS25990_DEFAULT_RIMON;
> +	int ret;
> +
> +	ret = device_property_read_u32(dev, "ti,rimon-micro-ohms", &rimon);
> +	if (ret < 0 && ret != -EINVAL)
> +		return dev_err_probe(dev, ret, "failed to get rimon\n");
> +
> +	info = devm_kmemdup(dev, &tps25990_base_info, sizeof(*info), GFP_KERNEL);
> +	if (!info)
> +		return -ENOMEM;
> +
> +	/* Adapt the current and power scale for each instance */
> +	tps25990_set_m(&info->m[PSC_CURRENT_IN], rimon);
> +	tps25990_set_m(&info->m[PSC_POWER], rimon);
> +
> +	return pmbus_do_probe(client, info);
> +}
> +
> +static struct i2c_driver tps25990_driver = {
> +	.driver = {
> +		.name = "tps25990",
> +		.of_match_table = tps25990_of_match,
> +	},
> +	.probe = tps25990_probe,
> +	.id_table = tps25990_i2c_id,
> +};
> +module_i2c_driver(tps25990_driver);
> +
> +MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
> +MODULE_DESCRIPTION("PMBUS driver for TPS25990 eFuse");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS(PMBUS);

Tested basic telemetry and control functionality on TPS25990 EVM with 
J722S EVM :
https://gist.github.com/vaishnavachath/5d2f3190955799f72fda1374aab36cb0

Tested-by: Vaishnav Achath <vaishnav.a@ti.com>

Thanks and Regards,
Vaishnav

>