Message ID | 20240812103254.26972-4-ansuelsmth@gmail.com |
---|---|
State | Changes Requested |
Delegated to: | Tom Rini |
Headers | show |
Series | led: introduce LED boot and activity function | expand |
Hi Christian, On Mon, 12 Aug 2024 at 12:33, Christian Marangi <ansuelsmth@gmail.com> wrote: > > Implement LED boot API to signal correct boot of the system. > > led_boot_on/off/blink() are introduced to turn ON, OFF and BLINK the > designated boot LED. > > New Kconfig are introduced, CONFIG_LED_BOOT_ENABLE to enable the feature. > This makes use of the /config property "u-boot,boot-led" to the define > the boot LED. > It's also introduced a new /config property "u-boot,boot-led-period" to > define the default period when the LED is set to blink mode. > > If "u-boot,boot-led-period" is not defined, the value of 250 (ms) is > used by default. > > If CONFIG_LED_BLINK or CONFIG_LED_SW_BLINK is not enabled, > led_boot_blink call will fallback to simple LED ON. > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > doc/device-tree-bindings/config.txt | 3 ++ > drivers/led/Kconfig | 20 +++++++++ > include/led.h | 64 +++++++++++++++++++++++++++++ > 3 files changed, 87 insertions(+) > > diff --git a/doc/device-tree-bindings/config.txt b/doc/device-tree-bindings/config.txt > index f50c68bbdc3..68edd177040 100644 > --- a/doc/device-tree-bindings/config.txt > +++ b/doc/device-tree-bindings/config.txt > @@ -31,6 +31,9 @@ u-boot,error-led (string) > This is used to specify the label for an LED to indicate an error and > a successful boot, on supported hardware. > > +u-boot,boot-led-period (int) > + This is used to specify the default period for an LED in blink mode. > + I'm sorry to say that this is out-of-date. The new schema is in options/ and is documented at dtschema: dtschema/schemas/options/u-boot.yaml You should add new things there. If you have time, it would be great if you could send bindings for the things in config.txt > bootsecure (int) > Indicates that U-Boot should use secure_boot_cmd() to run commands, > rather than the normal CLI. This can be used in production images, to > diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig > index bee74b25751..fd9442edaf3 100644 > --- a/drivers/led/Kconfig > +++ b/drivers/led/Kconfig > @@ -9,6 +9,26 @@ config LED > can provide access to board-specific LEDs. Use of the device tree > for configuration is encouraged. > > +config LED_BOOT_ENABLE > + bool "Enable LED boot support" > + help > + Enable LED boot support. > + > + LED boot is a specific LED assigned to signal boot operation status. > + > +config LED_BOOT_LABEL > + string "LED boot label" > + depends on LED_BOOT_ENABLE > + help > + LED label defined in DT to assign for LED boot usage. > + > +config LED_BOOT_PERIOD > + int "LED boot period" > + depends on LED_BOOT_ENABLE && (LED_BLINK || LED_SW_BLINK) > + default 2 Should that be 2000? It is a very fast blink if it is 2ms > + help > + LED boot blink period in ms. > + > config LED_BCM6328 > bool "LED Support for BCM6328" > depends on LED && ARCH_BMIPS > diff --git a/include/led.h b/include/led.h > index c1f3380f253..2d3b89674e2 100644 > --- a/include/led.h > +++ b/include/led.h > @@ -9,6 +9,7 @@ > > #include <stdbool.h> > #include <cyclic.h> > +#include <dm/ofnode.h> > > struct udevice; > > @@ -159,4 +160,67 @@ int led_sw_set_period(struct udevice *dev, int period_ms); > bool led_sw_is_blinking(struct udevice *dev); > bool led_sw_on_state_change(struct udevice *dev, enum led_state_t state); > > +#ifdef CONFIG_LED_BOOT_ENABLE > + > +/** > + * led_boot_on() - turn ON the designated LED for booting > + * > + * Return: 0 if OK, -ve on error > + */ > +static inline int led_boot_on(void) I wonder why these are inline functions? You should be able to put this code in the C file, with an #ifdef in the header to create an empty, static-inline function if needed. > +{ > + const char *led_name; > + > + led_name = ofnode_conf_read_str("u-boot,boot-led"); > + if (!led_name) > + return -ENOENT; > + > + return led_set_state_by_label(led_name, LEDST_ON); > +} > + > +/** > + * led_boot_off() - turn OFF the designated LED for booting > + * > + * Return: 0 if OK, -ve on error > + */ > +static inline int led_boot_off(void) > +{ > + const char *led_name; > + > + led_name = ofnode_conf_read_str("u-boot,boot-led"); > + if (!led_name) > + return -ENOENT; > + > + return led_set_state_by_label(CONFIG_LED_BOOT_LABEL, LEDST_OFF); > +} > + > +#if defined(CONFIG_LED_BLINK) || defined(CONFIG_LED_SW_BLINK) > +/** > + * led_boot_blink() - turn ON the designated LED for booting > + * > + * Return: 0 if OK, -ve on error > + */ > +static inline int led_boot_blink(void) > +{ > + const char *led_name; > + int led_period, ret; > + > + led_name = ofnode_conf_read_str("u-boot,boot-led"); > + if (!led_name) > + return -ENOENT; > + > + led_period = ofnode_conf_read_int("u-boot,boot-led-period", 250); > + > + ret = led_set_period_by_label(led_name, led_period); > + if (ret) > + return ret; > + > + return led_set_state_by_label(led_name, LEDST_BLINK); > +} > +#else > +/* If LED BLINK is not supported/enabled, fallback to LED ON */ > +#define led_boot_blink led_boot_on > +#endif > +#endif > + > #endif > -- > 2.45.2 > Regards, Simon
diff --git a/doc/device-tree-bindings/config.txt b/doc/device-tree-bindings/config.txt index f50c68bbdc3..68edd177040 100644 --- a/doc/device-tree-bindings/config.txt +++ b/doc/device-tree-bindings/config.txt @@ -31,6 +31,9 @@ u-boot,error-led (string) This is used to specify the label for an LED to indicate an error and a successful boot, on supported hardware. +u-boot,boot-led-period (int) + This is used to specify the default period for an LED in blink mode. + bootsecure (int) Indicates that U-Boot should use secure_boot_cmd() to run commands, rather than the normal CLI. This can be used in production images, to diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig index bee74b25751..fd9442edaf3 100644 --- a/drivers/led/Kconfig +++ b/drivers/led/Kconfig @@ -9,6 +9,26 @@ config LED can provide access to board-specific LEDs. Use of the device tree for configuration is encouraged. +config LED_BOOT_ENABLE + bool "Enable LED boot support" + help + Enable LED boot support. + + LED boot is a specific LED assigned to signal boot operation status. + +config LED_BOOT_LABEL + string "LED boot label" + depends on LED_BOOT_ENABLE + help + LED label defined in DT to assign for LED boot usage. + +config LED_BOOT_PERIOD + int "LED boot period" + depends on LED_BOOT_ENABLE && (LED_BLINK || LED_SW_BLINK) + default 2 + help + LED boot blink period in ms. + config LED_BCM6328 bool "LED Support for BCM6328" depends on LED && ARCH_BMIPS diff --git a/include/led.h b/include/led.h index c1f3380f253..2d3b89674e2 100644 --- a/include/led.h +++ b/include/led.h @@ -9,6 +9,7 @@ #include <stdbool.h> #include <cyclic.h> +#include <dm/ofnode.h> struct udevice; @@ -159,4 +160,67 @@ int led_sw_set_period(struct udevice *dev, int period_ms); bool led_sw_is_blinking(struct udevice *dev); bool led_sw_on_state_change(struct udevice *dev, enum led_state_t state); +#ifdef CONFIG_LED_BOOT_ENABLE + +/** + * led_boot_on() - turn ON the designated LED for booting + * + * Return: 0 if OK, -ve on error + */ +static inline int led_boot_on(void) +{ + const char *led_name; + + led_name = ofnode_conf_read_str("u-boot,boot-led"); + if (!led_name) + return -ENOENT; + + return led_set_state_by_label(led_name, LEDST_ON); +} + +/** + * led_boot_off() - turn OFF the designated LED for booting + * + * Return: 0 if OK, -ve on error + */ +static inline int led_boot_off(void) +{ + const char *led_name; + + led_name = ofnode_conf_read_str("u-boot,boot-led"); + if (!led_name) + return -ENOENT; + + return led_set_state_by_label(CONFIG_LED_BOOT_LABEL, LEDST_OFF); +} + +#if defined(CONFIG_LED_BLINK) || defined(CONFIG_LED_SW_BLINK) +/** + * led_boot_blink() - turn ON the designated LED for booting + * + * Return: 0 if OK, -ve on error + */ +static inline int led_boot_blink(void) +{ + const char *led_name; + int led_period, ret; + + led_name = ofnode_conf_read_str("u-boot,boot-led"); + if (!led_name) + return -ENOENT; + + led_period = ofnode_conf_read_int("u-boot,boot-led-period", 250); + + ret = led_set_period_by_label(led_name, led_period); + if (ret) + return ret; + + return led_set_state_by_label(led_name, LEDST_BLINK); +} +#else +/* If LED BLINK is not supported/enabled, fallback to LED ON */ +#define led_boot_blink led_boot_on +#endif +#endif + #endif
Implement LED boot API to signal correct boot of the system. led_boot_on/off/blink() are introduced to turn ON, OFF and BLINK the designated boot LED. New Kconfig are introduced, CONFIG_LED_BOOT_ENABLE to enable the feature. This makes use of the /config property "u-boot,boot-led" to the define the boot LED. It's also introduced a new /config property "u-boot,boot-led-period" to define the default period when the LED is set to blink mode. If "u-boot,boot-led-period" is not defined, the value of 250 (ms) is used by default. If CONFIG_LED_BLINK or CONFIG_LED_SW_BLINK is not enabled, led_boot_blink call will fallback to simple LED ON. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- doc/device-tree-bindings/config.txt | 3 ++ drivers/led/Kconfig | 20 +++++++++ include/led.h | 64 +++++++++++++++++++++++++++++ 3 files changed, 87 insertions(+)