@@ -65,7 +65,6 @@ R: Sam Protsenko <semen.protsenko@linaro.org>
S: Maintained
T: git https://source.denx.de/u-boot/custodians/u-boot-dfu.git
F: boot/android_ab.c
-F: cmd/ab_select.c
F: doc/android/ab.rst
F: include/android_ab.h
F: test/py/tests/test_android/test_ab.py
@@ -1053,6 +1053,7 @@ config CMD_ADC
config CMD_BCB
bool "bcb"
depends on PARTITIONS
+ depends on ANDROID_AB
help
Read/modify/write the fields of Bootloader Control Block, usually
stored on the flash "misc" partition with its structure defined in:
@@ -1766,20 +1767,6 @@ config CMD_XXD
endmenu
-menu "Android support commands"
-
-config CMD_AB_SELECT
- bool "ab_select"
- depends on ANDROID_AB
- help
- On Android devices with more than one boot slot (multiple copies of
- the kernel and system images) this provides a command to select which
- slot should be used to boot from and register the boot attempt. This
- is used by the new A/B update model where one slot is updated in the
- background while running from the other slot.
-
-endmenu
-
if NET
menuconfig CMD_NET
@@ -17,7 +17,6 @@ obj-$(CONFIG_CMD_2048) += 2048.o
obj-$(CONFIG_CMD_ACPI) += acpi.o
obj-$(CONFIG_CMD_ADDRMAP) += addrmap.o
obj-$(CONFIG_CMD_AES) += aes.o
-obj-$(CONFIG_CMD_AB_SELECT) += ab_select.o
obj-$(CONFIG_CMD_ADC) += adc.o
obj-$(CONFIG_CMD_ARMFLASH) += armflash.o
obj-$(CONFIG_BLK) += blk_common.o
deleted file mode 100644
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: BSD-2-Clause
-/*
- * Copyright (C) 2017 The Android Open Source Project
- */
-
-#include <android_ab.h>
-#include <command.h>
-#include <env.h>
-#include <part.h>
-
-static int do_ab_select(struct cmd_tbl *cmdtp, int flag, int argc,
- char *const argv[])
-{
- int ret;
- struct blk_desc *dev_desc;
- struct disk_partition part_info;
- char slot[2];
- bool dec_tries = true;
-
- if (argc < 4)
- return CMD_RET_USAGE;
-
- for (int i = 4; i < argc; i++) {
- if (strcmp(argv[i], "--no-dec") == 0) {
- dec_tries = false;
- } else {
- return CMD_RET_USAGE;
- }
- }
-
- /* Lookup the "misc" partition from argv[2] and argv[3] */
- if (part_get_info_by_dev_and_name_or_num(argv[2], argv[3],
- &dev_desc, &part_info,
- false) < 0) {
- return CMD_RET_FAILURE;
- }
-
- ret = ab_select_slot(dev_desc, &part_info, dec_tries);
- if (ret < 0) {
- printf("Android boot failed, error %d.\n", ret);
- return CMD_RET_FAILURE;
- }
-
- /* Android standard slot names are 'a', 'b', ... */
- slot[0] = BOOT_SLOT_NAME(ret);
- slot[1] = '\0';
- env_set(argv[1], slot);
- printf("ANDROID: Booting slot: %s\n", slot);
- return CMD_RET_SUCCESS;
-}
-
-U_BOOT_CMD(ab_select, 5, 0, do_ab_select,
- "Select the slot used to boot from and register the boot attempt.",
- "<slot_var_name> <interface> <dev[:part|#part_name]> [--no-dec]\n"
- " - Load the slot metadata from the partition 'part' on\n"
- " device type 'interface' instance 'dev' and store the active\n"
- " slot in the 'slot_var_name' variable. This also updates the\n"
- " Android slot metadata with a boot attempt, which can cause\n"
- " successive calls to this function to return a different result\n"
- " if the returned slot runs out of boot attempts.\n"
- " - If 'part_name' is passed, preceded with a # instead of :, the\n"
- " partition name whose label is 'part_name' will be looked up in\n"
- " the partition table. This is commonly the \"misc\" partition.\n"
- " - If '--no-dec' is set, the number of tries remaining will not\n"
- " decremented for the selected boot slot\n"
-);
@@ -8,6 +8,7 @@
#include <android_bootloader_message.h>
#include <bcb.h>
#include <command.h>
+#include <android_ab.h>
#include <display_options.h>
#include <log.h>
#include <part.h>
@@ -23,6 +24,7 @@ enum bcb_cmd {
BCB_CMD_FIELD_TEST,
BCB_CMD_FIELD_DUMP,
BCB_CMD_STORE,
+ BCB_CMD_AB_SELECT,
};
static const char * const fields[] = {
@@ -52,6 +54,8 @@ static int bcb_cmd_get(char *cmd)
return BCB_CMD_STORE;
if (!strcmp(cmd, "dump"))
return BCB_CMD_FIELD_DUMP;
+ if (!strcmp(cmd, "ab_select"))
+ return BCB_CMD_AB_SELECT;
else
return -1;
}
@@ -85,6 +89,10 @@ static int bcb_is_misused(int argc, char *const argv[])
if (argc != 2)
goto err;
break;
+ case BCB_CMD_AB_SELECT:
+ if (argc != 4 && argc != 5)
+ goto err;
+ return 0;
default:
printf("Error: 'bcb %s' not supported\n", argv[0]);
return -1;
@@ -414,6 +422,44 @@ void bcb_reset(void)
__bcb_reset();
}
+static int do_bcb_ab_select(struct cmd_tbl *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ int ret;
+ struct blk_desc *dev_desc;
+ struct disk_partition part_info;
+ char slot[2];
+ bool dec_tries = true;
+
+ for (int i = 4; i < argc; i++) {
+ if (strcmp(argv[i], "--no-dec") == 0)
+ dec_tries = false;
+ else
+ return CMD_RET_USAGE;
+ }
+
+ /* Lookup the "misc" partition from argv[2] and argv[3] */
+ if (part_get_info_by_dev_and_name_or_num(argv[2], argv[3],
+ &dev_desc, &part_info,
+ false) < 0) {
+ return CMD_RET_FAILURE;
+ }
+
+ ret = ab_select_slot(dev_desc, &part_info, dec_tries);
+ if (ret < 0) {
+ printf("Android boot failed, error %d.\n", ret);
+ return CMD_RET_FAILURE;
+ }
+
+ /* Android standard slot names are 'a', 'b', ... */
+ slot[0] = BOOT_SLOT_NAME(ret);
+ slot[1] = '\0';
+ env_set(argv[1], slot);
+ printf("ANDROID: Booting slot: %s\n", slot);
+
+ return CMD_RET_SUCCESS;
+}
+
static struct cmd_tbl cmd_bcb_sub[] = {
U_BOOT_CMD_MKENT(load, CONFIG_SYS_MAXARGS, 1, do_bcb_load, "", ""),
U_BOOT_CMD_MKENT(set, CONFIG_SYS_MAXARGS, 1, do_bcb_set, "", ""),
@@ -421,6 +467,8 @@ static struct cmd_tbl cmd_bcb_sub[] = {
U_BOOT_CMD_MKENT(test, CONFIG_SYS_MAXARGS, 1, do_bcb_test, "", ""),
U_BOOT_CMD_MKENT(dump, CONFIG_SYS_MAXARGS, 1, do_bcb_dump, "", ""),
U_BOOT_CMD_MKENT(store, CONFIG_SYS_MAXARGS, 1, do_bcb_store, "", ""),
+ U_BOOT_CMD_MKENT(ab_select, CONFIG_SYS_MAXARGS, 1,
+ do_bcb_ab_select, "", ""),
};
static int do_bcb(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
@@ -460,15 +508,18 @@ U_BOOT_CMD(
"bcb dump <field> - dump BCB <field>\n"
"bcb store - store BCB back to <interface>\n"
"\n"
- "Legend:\n"
- "<interface> - storage device interface (virtio, mmc, etc)\n"
- "<dev> - storage device index containing the BCB partition\n"
- "<part> - partition index or name containing the BCB\n"
- "<field> - one of {command,status,recovery,stage,reserved}\n"
- "<op> - the binary operator used in 'bcb test':\n"
- " '=' returns true if <val> matches the string stored in <field>\n"
- " '~' returns true if <val> matches a subset of <field>'s string\n"
- "<val> - string/text provided as input to bcb {set,test}\n"
- " NOTE: any ':' character in <val> will be replaced by line feed\n"
- " during 'bcb set' and used as separator by upper layers\n"
+ "bcb ab_select -\n"
+ " Select the slot used to boot from and register the boot attempt.\n"
+ " <slot_var_name> <interface> <dev[:part|#part_name]> [--no-dec]\n"
+ " - Load the slot metadata from the partition 'part' on\n"
+ " device type 'interface' instance 'dev' and store the active\n"
+ " slot in the 'slot_var_name' variable. This also updates the\n"
+ " Android slot metadata with a boot attempt, which can cause\n"
+ " successive calls to this function to return a different result\n"
+ " if the returned slot runs out of boot attempts.\n"
+ " - If 'part_name' is passed, preceded with a # instead of :, the\n"
+ " partition name whose label is 'part_name' will be looked up in\n"
+ " the partition table. This is commonly the \"misc\" partition.\n"
+ " - If '--no-dec' is set, the number of tries remaining will not\n"
+ " decremented for the selected boot slot\n"
);
@@ -50,7 +50,6 @@ CONFIG_CMD_ADTIMG=y
CONFIG_CMD_ABOOTIMG=y
CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
CONFIG_CMD_BCB=y
-CONFIG_CMD_AB_SELECT=y
CONFIG_BOOTP_DNS2=y
# CONFIG_CMD_PMIC is not set
CONFIG_CMD_AVB=y
@@ -47,7 +47,6 @@ CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_AB_SELECT=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_AVB=y
CONFIG_OF_CONTROL=y
@@ -47,7 +47,6 @@ CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_AB_SELECT=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_AVB=y
CONFIG_OF_CONTROL=y
@@ -25,6 +25,7 @@ CONFIG_CONSOLE_RECORD=y
CONFIG_CONSOLE_RECORD_OUT_SIZE=0x6000
CONFIG_PRE_CONSOLE_BUFFER=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_ANDROID_AB=y
CONFIG_CMD_CPU=y
CONFIG_CMD_LICENSE=y
CONFIG_CMD_BOOTZ=y
@@ -44,6 +45,7 @@ CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MX_CYCLIC=y
CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_BCB=y
CONFIG_CMD_DEMO=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
@@ -167,8 +169,8 @@ CONFIG_PWRSEQ=y
CONFIG_I2C_EEPROM=y
CONFIG_MMC_SANDBOX=y
CONFIG_DM_MTD=y
-CONFIG_MTD_RAW_NAND=y
CONFIG_SYS_MAX_NAND_DEVICE=8
+CONFIG_MTD_RAW_NAND=y
CONFIG_SYS_NAND_USE_FLASH_BBT=y
CONFIG_NAND_SANDBOX=y
CONFIG_SYS_NAND_ONFI_DETECTION=y
@@ -66,6 +66,7 @@ CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEM_SEARCH=y
CONFIG_CMD_MX_CYCLIC=y
CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_BCB=y
CONFIG_CMD_DEMO=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPIO_READ=y
@@ -93,7 +94,6 @@ CONFIG_CMD_AXI=y
CONFIG_CMD_CAT=y
CONFIG_CMD_SETEXPR_FMT=y
CONFIG_CMD_XXD=y
-CONFIG_CMD_AB_SELECT=y
CONFIG_CMD_DHCP6=y
CONFIG_BOOTP_DNS2=y
CONFIG_CMD_PCAP=y
@@ -219,8 +219,8 @@ CONFIG_MMC_PCI=y
CONFIG_MMC_SANDBOX=y
CONFIG_MMC_SDHCI=y
CONFIG_DM_MTD=y
-CONFIG_MTD_RAW_NAND=y
CONFIG_SYS_MAX_NAND_DEVICE=8
+CONFIG_MTD_RAW_NAND=y
CONFIG_SYS_NAND_USE_FLASH_BBT=y
CONFIG_NAND_SANDBOX=y
CONFIG_SYS_NAND_ONFI_DETECTION=y
@@ -18,7 +18,7 @@ The A/B updates support can be activated by specifying next options in
your board configuration file::
CONFIG_ANDROID_AB=y
- CONFIG_CMD_AB_SELECT=y
+ CONFIG_CMD_BCB=y
The disk space on target device must be partitioned in a way so that each
partition which needs to be updated has two or more instances. The name of
@@ -26,8 +26,8 @@ each instance must be formed by adding suffixes: ``_a``, ``_b``, ``_c``, etc.
For example: ``boot_a``, ``boot_b``, ``system_a``, ``system_b``, ``vendor_a``,
``vendor_b``.
-As a result you can use ``ab_select`` command to ensure A/B boot process in your
-boot script. This command analyzes and processes A/B metadata stored on a
+As a result you can use ``bcb ab_select`` command to ensure A/B boot process in
+your boot script. This command analyzes and processes A/B metadata stored on a
special partition (e.g. ``misc``) and determines which slot should be used for
booting up.
@@ -42,15 +42,15 @@ Command usage
.. code-block:: none
- ab_select <slot_var_name> <interface> <dev[:part_number|#part_name]>
+ bcb ab_select <slot_var_name> <interface> <dev[:part_number|#part_name]>
for example::
- => ab_select slot_name mmc 1:4
+ => bcb ab_select slot_name mmc 1:4
or::
- => ab_select slot_name mmc 1#misc
+ => bcb ab_select slot_name mmc 1#misc
Result::
@@ -12,7 +12,7 @@
#define LOGO_UUID "43a3305d-150f-4cc9-bd3b-38fca8693846;"
#define ROOT_UUID "ddb8c3f6-d94d-4394-b633-3134139cc2e0;"
-#if defined(CONFIG_CMD_AB_SELECT)
+#if defined(CONFIG_CMD_BCB)
#define PARTS_DEFAULT \
"uuid_disk=${uuid_gpt_disk};" \
"name=logo,start=512K,size=2M,uuid=" LOGO_UUID \
@@ -12,7 +12,7 @@
#define LOGO_UUID "43a3305d-150f-4cc9-bd3b-38fca8693846;"
#define ROOT_UUID "ddb8c3f6-d94d-4394-b633-3134139cc2e0;"
-#if defined(CONFIG_CMD_AB_SELECT)
+#if defined(CONFIG_CMD_BCB)
#define PARTS_DEFAULT \
"uuid_disk=${uuid_gpt_disk};" \
"name=logo,start=512K,size=2M,uuid=" LOGO_UUID \
@@ -47,13 +47,13 @@
#define AVB_VERIFY_CMD ""
#endif
-#if defined(CONFIG_CMD_AB_SELECT)
+#if defined(CONFIG_CMD_BCB)
#define ANDROIDBOOT_GET_CURRENT_SLOT_CMD "get_current_slot=" \
"if part number mmc ${mmcdev} " CONTROL_PARTITION " control_part_number; " \
"then " \
"echo " CONTROL_PARTITION \
" partition number:${control_part_number};" \
- "ab_select current_slot mmc ${mmcdev}:${control_part_number};" \
+ "bcb ab_select current_slot mmc ${mmcdev}:${control_part_number};" \
"else " \
"echo " CONTROL_PARTITION " partition not found;" \
"fi;\0"
@@ -93,13 +93,13 @@
#define CONTROL_PARTITION "misc"
-#if defined(CONFIG_CMD_AB_SELECT)
+#if defined(CONFIG_CMD_BCB)
#define AB_SELECT_SLOT \
"if part number mmc 1 " CONTROL_PARTITION " control_part_number; " \
"then " \
"echo " CONTROL_PARTITION \
" partition number:${control_part_number};" \
- "ab_select slot_name mmc ${mmcdev}:${control_part_number};" \
+ "bcb ab_select slot_name mmc ${mmcdev}:${control_part_number};" \
"else " \
"echo " CONTROL_PARTITION " partition not found;" \
"exit;" \
@@ -56,20 +56,20 @@ def ab_disk_image(u_boot_console):
@pytest.mark.boardspec('sandbox')
@pytest.mark.buildconfigspec('android_ab')
-@pytest.mark.buildconfigspec('cmd_ab_select')
+@pytest.mark.buildconfigspec('cmd_bcb')
@pytest.mark.requiredtool('sgdisk')
def test_ab(ab_disk_image, u_boot_console):
- """Test the 'ab_select' command."""
+ """Test the 'bcb ab_select' command."""
u_boot_console.run_command('host bind 0 ' + ab_disk_image.path)
- output = u_boot_console.run_command('ab_select slot_name host 0#misc')
+ output = u_boot_console.run_command('bcb ab_select slot_name host 0#misc')
assert 're-initializing A/B metadata' in output
assert 'Attempting slot a, tries remaining 7' in output
output = u_boot_console.run_command('printenv slot_name')
assert 'slot_name=a' in output
- output = u_boot_console.run_command('ab_select slot_name host 0:1')
+ output = u_boot_console.run_command('bcb ab_select slot_name host 0:1')
assert 'Attempting slot b, tries remaining 7' in output
output = u_boot_console.run_command('printenv slot_name')
assert 'slot_name=b' in output
To enhance code organization, it is beneficial to consolidate all A/B BCB management routines into a single super-command. The 'bcb' command is an excellent candidate for this purpose. This patch integrates the separate 'ab_select' command into the 'bcb' group as the 'ab_select' subcommand, maintaining the same parameter list for consistency. Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com> --- MAINTAINERS | 1 - cmd/Kconfig | 15 +---- cmd/Makefile | 1 - cmd/ab_select.c | 66 -------------------- cmd/bcb.c | 73 +++++++++++++++++++---- configs/am57xx_hs_evm_usb_defconfig | 1 - configs/khadas-vim3_android_ab_defconfig | 1 - configs/khadas-vim3l_android_ab_defconfig | 1 - configs/sandbox64_defconfig | 4 +- configs/sandbox_defconfig | 4 +- doc/android/ab.rst | 12 ++-- include/configs/khadas-vim3_android.h | 2 +- include/configs/khadas-vim3l_android.h | 2 +- include/configs/meson64_android.h | 4 +- include/configs/ti_omap5_common.h | 4 +- test/py/tests/test_android/test_ab.py | 8 +-- 16 files changed, 84 insertions(+), 115 deletions(-) delete mode 100644 cmd/ab_select.c