@@ -44,39 +44,6 @@ i2c@c240000 {
status = "okay";
};
- i2c@c250000 {
- power-sensor@41 {
- compatible = "ti,ina3221";
- reg = <0x41>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- input@0 {
- reg = <0x0>;
- label = "CVB_ATX_12V";
- shunt-resistor-micro-ohms = <2000>;
- };
-
- input@1 {
- reg = <0x1>;
- label = "CVB_ATX_3V3";
- shunt-resistor-micro-ohms = <2000>;
- };
-
- input@2 {
- reg = <0x2>;
- label = "CVB_ATX_5V";
- shunt-resistor-micro-ohms = <2000>;
- };
- };
-
- power-sensor@44 {
- compatible = "ti,ina219";
- reg = <0x44>;
- shunt-resistor = <2000>;
- };
- };
-
rtc@c2a0000 {
status = "okay";
};
@@ -183,6 +183,39 @@ usb@3610000 {
phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
"usb3-0", "usb3-1", "usb3-2";
};
+
+ i2c@c250000 {
+ power-sensor@41 {
+ compatible = "ti,ina3221";
+ reg = <0x41>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ input@0 {
+ reg = <0x0>;
+ label = "CVB_ATX_12V";
+ shunt-resistor-micro-ohms = <2000>;
+ };
+
+ input@1 {
+ reg = <0x1>;
+ label = "CVB_ATX_3V3";
+ shunt-resistor-micro-ohms = <2000>;
+ };
+
+ input@2 {
+ reg = <0x2>;
+ label = "CVB_ATX_5V";
+ shunt-resistor-micro-ohms = <2000>;
+ };
+ };
+
+ power-sensor@44 {
+ compatible = "ti,ina219";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+ };
};
vdd_3v3_dp: regulator-vdd-3v3-dp {
The power-sensors are located on the carrier board and not the module board and so update the IGX Orin device-tree files to fix this. Fixes: 9152ed09309d ("arm64: tegra: Add power-sensors for Tegra234 boards") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> --- Changes since V1: - Updated subject from "arm64: tegra: Correct location of INA219 for IGX Orin" - Moved both the INA219 and INA3221 power-sensors .../boot/dts/nvidia/tegra234-p3701-0008.dtsi | 33 ------------------- .../boot/dts/nvidia/tegra234-p3740-0002.dtsi | 33 +++++++++++++++++++ 2 files changed, 33 insertions(+), 33 deletions(-)