mbox series

[0/2] Add support for ADMA

Message ID 20240726062639.2609974-1-abin.joseph@amd.com
Headers show
Series Add support for ADMA | expand

Message

Abin Joseph July 26, 2024, 6:26 a.m. UTC 
Add support for Versal Gen 2 DMA IP by adding a compatible string and
separate Versal Gen 2 DMA IP register offset.

Abin Joseph (2):
  dt-bindings: dmaengine: zynqmp_dma: Add a new compatible string
  dmaengine: zynqmp_dma: Add support for AMD Versal Gen 2 DMA IP

 .../dma/xilinx/xlnx,zynqmp-dma-1.0.yaml         | 17 ++++++++++++++++-
 drivers/dma/xilinx/zynqmp_dma.c                 | 17 +++++++++++++----
 2 files changed, 29 insertions(+), 5 deletions(-)

Comments

Krzysztof Kozlowski July 26, 2024, 9:12 a.m. UTC | #1 
On 26/07/2024 08:26, Abin Joseph wrote:
> ZynqMp DMA IP and AMD Versal Gen 2 DMA IP are similar but have different
> interrupt register offset. Create a dedicated compatible string to
> support Versal Gen 2 DMA IP with Irq register offset for interrupt
> Enable/Disable/Status/Mask functionality.
> 
>  
>  /**
> @@ -919,6 +924,9 @@ static int zynqmp_dma_chan_probe(struct zynqmp_dma_device *zdev,
>  		return -EINVAL;
>  	}
>  
> +	if (of_device_is_compatible(node, "amd,versal2-dma-1.0"))
> +		chan->irq_offset = IRQ_REG_OFFSET;

Do not sprinkle compatibles, but use match data.

Best regards,
Krzysztof
Vinod Koul Aug. 5, 2024, 4:53 p.m. UTC | #2 
On 26-07-24, 11:56, Abin Joseph wrote:
> ZynqMp DMA IP and AMD Versal Gen 2 DMA IP are similar but have different
> interrupt register offset. Create a dedicated compatible string to
> support Versal Gen 2 DMA IP with Irq register offset for interrupt
> Enable/Disable/Status/Mask functionality.
> 
> Signed-off-by: Abin Joseph <abin.joseph@amd.com>
> ---
>  drivers/dma/xilinx/zynqmp_dma.c | 17 +++++++++++++----
>  1 file changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
> index f31631bef961..a5d84d746929 100644
> --- a/drivers/dma/xilinx/zynqmp_dma.c
> +++ b/drivers/dma/xilinx/zynqmp_dma.c
> @@ -22,10 +22,10 @@
>  #include "../dmaengine.h"
>  
>  /* Register Offsets */
> -#define ZYNQMP_DMA_ISR			0x100
> -#define ZYNQMP_DMA_IMR			0x104
> -#define ZYNQMP_DMA_IER			0x108
> -#define ZYNQMP_DMA_IDS			0x10C
> +#define ZYNQMP_DMA_ISR			(chan->irq_offset + 0x100)
> +#define ZYNQMP_DMA_IMR			(chan->irq_offset + 0x104)
> +#define ZYNQMP_DMA_IER			(chan->irq_offset + 0x108)
> +#define ZYNQMP_DMA_IDS			(chan->irq_offset + 0x10C)

Lower case please

>  #define ZYNQMP_DMA_CTRL0		0x110
>  #define ZYNQMP_DMA_CTRL1		0x114
>  #define ZYNQMP_DMA_DATA_ATTR		0x120
> @@ -145,6 +145,9 @@
>  #define tx_to_desc(tx)		container_of(tx, struct zynqmp_dma_desc_sw, \
>  					     async_tx)
>  
> +/* IRQ Register offset for VersalGen2 */
> +#define IRQ_REG_OFFSET			0x308
> +
>  /**
>   * struct zynqmp_dma_desc_ll - Hw linked list descriptor
>   * @addr: Buffer address
> @@ -211,6 +214,7 @@ struct zynqmp_dma_desc_sw {
>   * @bus_width: Bus width
>   * @src_burst_len: Source burst length
>   * @dst_burst_len: Dest burst length
> + * @irq_offset: Irq register offset
>   */
>  struct zynqmp_dma_chan {
>  	struct zynqmp_dma_device *zdev;
> @@ -235,6 +239,7 @@ struct zynqmp_dma_chan {
>  	u32 bus_width;
>  	u32 src_burst_len;
>  	u32 dst_burst_len;
> +	u32 irq_offset;
>  };
>  
>  /**
> @@ -919,6 +924,9 @@ static int zynqmp_dma_chan_probe(struct zynqmp_dma_device *zdev,
>  		return -EINVAL;
>  	}
>  
> +	if (of_device_is_compatible(node, "amd,versal2-dma-1.0"))
> +		chan->irq_offset = IRQ_REG_OFFSET;

This should be added as driver_data

> +
>  	chan->is_dmacoherent =  of_property_read_bool(node, "dma-coherent");
>  	zdev->chan = chan;
>  	tasklet_setup(&chan->tasklet, zynqmp_dma_do_tasklet);
> @@ -1162,6 +1170,7 @@ static void zynqmp_dma_remove(struct platform_device *pdev)
>  
>  static const struct of_device_id zynqmp_dma_of_match[] = {
>  	{ .compatible = "xlnx,zynqmp-dma-1.0", },
> +	{ .compatible = "amd,versal2-dma-1.0", },
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, zynqmp_dma_of_match);
> -- 
> 2.25.1