Message ID | 20240711083520.6751-1-luis.henriques@linux.dev |
---|---|
State | Superseded |
Headers | show |
Series | [v4] ext4: fix fast commit inode enqueueing during a full journal commit | expand |
On 2024/7/11 16:35, Luis Henriques (SUSE) wrote: > When a full journal commit is on-going, any fast commit has to be enqueued > into a different queue: FC_Q_STAGING instead of FC_Q_MAIN. This enqueueing > is done only once, i.e. if an inode is already queued in a previous fast > commit entry it won't be enqueued again. However, if a full commit starts > _after_ the inode is enqueued into FC_Q_MAIN, the next fast commit needs to > be done into FC_Q_STAGING. And this is not being done in function > ext4_fc_track_template(). > > This patch fixes the issue by re-enqueuing an inode into the STAGING queue > during the fast commit clean-up callback if it has a tid (i_sync_tid) > greater than the one being handled. The STAGING queue will then be spliced > back into MAIN. > > This bug was found using fstest generic/047. This test creates several 32k > bytes files, sync'ing each of them after it's creation, and then shutting > down the filesystem. Some data may be loss in this operation; for example a > file may have it's size truncated to zero. > > Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev> > --- > Hi! > > v4 of this patch enqueues the inode into STAGING *only* if the current tid > is non-zero. It will be zero when doing an fc commit, and this would mean > to always re-enqueue the inode. This fixes the regressions caught by Ted > in v3 with fstests generic/472 generic/496 generic/643. > > Also, since 2nd patch of v3 has already been merged, I've rebased this patch > to be applied on top of it. > > fs/ext4/fast_commit.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/fs/ext4/fast_commit.c b/fs/ext4/fast_commit.c > index 3926a05eceee..facbc8dbbaa2 100644 > --- a/fs/ext4/fast_commit.c > +++ b/fs/ext4/fast_commit.c > @@ -1290,6 +1290,16 @@ static void ext4_fc_cleanup(journal_t *journal, int full, tid_t tid) > EXT4_STATE_FC_COMMITTING); > if (tid_geq(tid, iter->i_sync_tid)) > ext4_fc_reset_inode(&iter->vfs_inode); > + } else if (tid) { > + /* > + * If the tid is valid (i.e. non-zero) re-enqueue the one quick question about tid, if one disk is using long time and its tid get wrapped to 0, is it a valid seq? I don't find code handling this situation. > + * inode into STAGING, which will then be splice back > + * into MAIN > + */ > + list_add_tail(&EXT4_I(&iter->vfs_inode)->i_fc_list, > + &sbi->s_fc_q[FC_Q_STAGING]); > + } > + > /* Make sure EXT4_STATE_FC_COMMITTING bit is clear */ > smp_mb(); > #if (BITS_PER_LONG < 64) >
On Thu, Jul 11 2024, wangjianjian (C) wrote: > On 2024/7/11 16:35, Luis Henriques (SUSE) wrote: >> When a full journal commit is on-going, any fast commit has to be enqueued >> into a different queue: FC_Q_STAGING instead of FC_Q_MAIN. This enqueueing >> is done only once, i.e. if an inode is already queued in a previous fast >> commit entry it won't be enqueued again. However, if a full commit starts >> _after_ the inode is enqueued into FC_Q_MAIN, the next fast commit needs to >> be done into FC_Q_STAGING. And this is not being done in function >> ext4_fc_track_template(). >> This patch fixes the issue by re-enqueuing an inode into the STAGING queue >> during the fast commit clean-up callback if it has a tid (i_sync_tid) >> greater than the one being handled. The STAGING queue will then be spliced >> back into MAIN. >> This bug was found using fstest generic/047. This test creates several 32k >> bytes files, sync'ing each of them after it's creation, and then shutting >> down the filesystem. Some data may be loss in this operation; for example a >> file may have it's size truncated to zero. >> Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev> >> --- >> Hi! >> v4 of this patch enqueues the inode into STAGING *only* if the current tid >> is non-zero. It will be zero when doing an fc commit, and this would mean >> to always re-enqueue the inode. This fixes the regressions caught by Ted >> in v3 with fstests generic/472 generic/496 generic/643. >> Also, since 2nd patch of v3 has already been merged, I've rebased this patch >> to be applied on top of it. >> fs/ext4/fast_commit.c | 10 ++++++++++ >> 1 file changed, 10 insertions(+) >> diff --git a/fs/ext4/fast_commit.c b/fs/ext4/fast_commit.c >> index 3926a05eceee..facbc8dbbaa2 100644 >> --- a/fs/ext4/fast_commit.c >> +++ b/fs/ext4/fast_commit.c >> @@ -1290,6 +1290,16 @@ static void ext4_fc_cleanup(journal_t *journal, int full, tid_t tid) >> EXT4_STATE_FC_COMMITTING); >> if (tid_geq(tid, iter->i_sync_tid)) >> ext4_fc_reset_inode(&iter->vfs_inode); >> + } else if (tid) { >> + /* >> + * If the tid is valid (i.e. non-zero) re-enqueue the > one quick question about tid, if one disk is using long time and its tid get > wrapped to 0, is it a valid seq? I don't find code handling this situation. Hmm... OK. So, to answer to your question, the 'tid' is expected to wrap. That's why we use: if (tid_geq(tid, iter->i_sync_tid)) instead of: if (tid >= iter->i_sync_tid) (The second patch in v3 actually fixed a few places where the tid_*() helpers weren't being used.) But your question shows me that my patch is wrong as '0' may actually be a valid 'tid' value. Cheers,
On 2024/7/11 23:16, Luis Henriques wrote: > On Thu, Jul 11 2024, wangjianjian (C) wrote: > >> On 2024/7/11 16:35, Luis Henriques (SUSE) wrote: >>> When a full journal commit is on-going, any fast commit has to be enqueued >>> into a different queue: FC_Q_STAGING instead of FC_Q_MAIN. This enqueueing >>> is done only once, i.e. if an inode is already queued in a previous fast >>> commit entry it won't be enqueued again. However, if a full commit starts >>> _after_ the inode is enqueued into FC_Q_MAIN, the next fast commit needs to >>> be done into FC_Q_STAGING. And this is not being done in function >>> ext4_fc_track_template(). >>> This patch fixes the issue by re-enqueuing an inode into the STAGING queue >>> during the fast commit clean-up callback if it has a tid (i_sync_tid) >>> greater than the one being handled. The STAGING queue will then be spliced >>> back into MAIN. >>> This bug was found using fstest generic/047. This test creates several 32k >>> bytes files, sync'ing each of them after it's creation, and then shutting >>> down the filesystem. Some data may be loss in this operation; for example a >>> file may have it's size truncated to zero. >>> Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev> >>> --- >>> Hi! >>> v4 of this patch enqueues the inode into STAGING *only* if the current tid >>> is non-zero. It will be zero when doing an fc commit, and this would mean >>> to always re-enqueue the inode. This fixes the regressions caught by Ted >>> in v3 with fstests generic/472 generic/496 generic/643. >>> Also, since 2nd patch of v3 has already been merged, I've rebased this patch >>> to be applied on top of it. >>> fs/ext4/fast_commit.c | 10 ++++++++++ >>> 1 file changed, 10 insertions(+) >>> diff --git a/fs/ext4/fast_commit.c b/fs/ext4/fast_commit.c >>> index 3926a05eceee..facbc8dbbaa2 100644 >>> --- a/fs/ext4/fast_commit.c >>> +++ b/fs/ext4/fast_commit.c >>> @@ -1290,6 +1290,16 @@ static void ext4_fc_cleanup(journal_t *journal, int full, tid_t tid) >>> EXT4_STATE_FC_COMMITTING); >>> if (tid_geq(tid, iter->i_sync_tid)) >>> ext4_fc_reset_inode(&iter->vfs_inode); >>> + } else if (tid) { >>> + /* >>> + * If the tid is valid (i.e. non-zero) re-enqueue the >> one quick question about tid, if one disk is using long time and its tid get >> wrapped to 0, is it a valid seq? I don't find code handling this situation. > Hmm... OK. So, to answer to your question, the 'tid' is expected to wrap. > That's why we use: > > if (tid_geq(tid, iter->i_sync_tid)) Yes, I know this. > > instead of: > > if (tid >= iter->i_sync_tid) > > (The second patch in v3 actually fixed a few places where the tid_*() > helpers weren't being used.) > > But your question shows me that my patch is wrong as '0' may actually be a > valid 'tid' value. Actually my question is, there are some place use '0' to check if a transaction is valid, e.g. In ext4_wait_for_tail_page_commit() 5218 while (1) { 5219 struct folio *folio = filemap_lock_folio(inode->i_mapping, 5220 inode->i_size >> PAGE_SHIFT); 5221 if (IS_ERR(folio)) 5222 return; 5223 ret = __ext4_journalled_invalidate_folio(folio, offset, 5224 folio_size(folio) - offset); 5225 folio_unlock(folio); 5226 folio_put(folio); 5227 if (ret != -EBUSY) 5228 return; 5229 commit_tid = 0; 5230 read_lock(&journal->j_state_lock); 5231 if (journal->j_committing_transaction) 5232 commit_tid = journal->j_committing_transaction->t_tid; 5233 read_unlock(&journal->j_state_lock); 5234 if (commit_tid) 5235 jbd2_log_wait_commit(journal, commit_tid); 5236 } 5237 We only wait commit if tid is not zero. And in __jbd2_log_wait_for_space() 79 if (space_left < nblocks) { 80 int chkpt = journal->j_checkpoint_transactions != NULL; 81 tid_t tid = 0; 82 83 if (journal->j_committing_transaction) 84 tid = journal->j_committing_transaction->t_tid; 85 spin_unlock(&journal->j_list_lock); 86 write_unlock(&journal->j_state_lock); 87 if (chkpt) { 88 jbd2_log_do_checkpoint(journal); 89 } else if (jbd2_cleanup_journal_tail(journal) == 0) { 90 /* We were able to recover space; yay! */ 91 ; 92 } else if (tid) { 93 /* 94 * jbd2_journal_commit_transaction() may want 95 * to take the checkpoint_mutex if JBD2_FLUSHED 96 * is set. So we need to temporarily drop it. 97 */ 98 mutex_unlock(&journal->j_checkpoint_mutex); 99 jbd2_log_wait_commit(journal, tid); 100 write_lock(&journal->j_state_lock); 101 continue; We also only wait commit if tid is not zero. Does it mean all these have bugs if '0' is a valid 'tid' ? But on the other hand, if we don't consider sync and fsync, and default commit interval is 5s, time of tid wrap to 0 is nearly 680 years. However, we can run sync/fsync to make tid to increase more quickly in real world ? > Cheers,
On Jul 11, 2024, at 10:16 AM, Wang Jianjian <wangjianjian0@foxmail.com> wrote: > On 2024/7/11 23:16, Luis Henriques wrote: >> On Thu, Jul 11 2024, wangjianjian (C) wrote: >> >>> On 2024/7/11 16:35, Luis Henriques (SUSE) wrote: >>>> When a full journal commit is on-going, any fast commit has to be enqueued >>>> into a different queue: FC_Q_STAGING instead of FC_Q_MAIN. This enqueueing >>>> is done only once, i.e. if an inode is already queued in a previous fast >>>> commit entry it won't be enqueued again. However, if a full commit starts >>>> _after_ the inode is enqueued into FC_Q_MAIN, the next fast commit needs to >>>> be done into FC_Q_STAGING. And this is not being done in function >>>> ext4_fc_track_template(). >>>> This patch fixes the issue by re-enqueuing an inode into the STAGING queue >>>> during the fast commit clean-up callback if it has a tid (i_sync_tid) >>>> greater than the one being handled. The STAGING queue will then be spliced >>>> back into MAIN. >>>> This bug was found using fstest generic/047. This test creates several 32k >>>> bytes files, sync'ing each of them after it's creation, and then shutting >>>> down the filesystem. Some data may be loss in this operation; for example a >>>> file may have it's size truncated to zero. >>>> Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev> >>>> --- >>>> Hi! >>>> v4 of this patch enqueues the inode into STAGING *only* if the current tid >>>> is non-zero. It will be zero when doing an fc commit, and this would mean >>>> to always re-enqueue the inode. This fixes the regressions caught by Ted >>>> in v3 with fstests generic/472 generic/496 generic/643. >>>> Also, since 2nd patch of v3 has already been merged, I've rebased this patch >>>> to be applied on top of it. >>>> fs/ext4/fast_commit.c | 10 ++++++++++ >>>> 1 file changed, 10 insertions(+) >>>> diff --git a/fs/ext4/fast_commit.c b/fs/ext4/fast_commit.c >>>> index 3926a05eceee..facbc8dbbaa2 100644 >>>> --- a/fs/ext4/fast_commit.c >>>> +++ b/fs/ext4/fast_commit.c >>>> @@ -1290,6 +1290,16 @@ static void ext4_fc_cleanup(journal_t *journal, int full, tid_t tid) >>>> EXT4_STATE_FC_COMMITTING); >>>> if (tid_geq(tid, iter->i_sync_tid)) >>>> ext4_fc_reset_inode(&iter->vfs_inode); >>>> + } else if (tid) { >>>> + /* >>>> + * If the tid is valid (i.e. non-zero) re-enqueue the >>> one quick question about tid, if one disk is using long time and its tid get >>> wrapped to 0, is it a valid seq? I don't find code handling this situation. >> Hmm... OK. So, to answer to your question, the 'tid' is expected to wrap. >> That's why we use: >> >> if (tid_geq(tid, iter->i_sync_tid)) > Yes, I know this. >> >> instead of: >> >> if (tid >= iter->i_sync_tid) >> >> (The second patch in v3 actually fixed a few places where the tid_*() >> helpers weren't being used.) >> >> But your question shows me that my patch is wrong as '0' may actually be a >> valid 'tid' value. > > Actually my question is, there are some place use '0' to check if a transaction is valid, e.g. > > In ext4_wait_for_tail_page_commit() > > 5218 while (1) { > 5219 struct folio *folio = filemap_lock_folio(inode->i_mapping, > 5220 inode->i_size >> PAGE_SHIFT); > 5221 if (IS_ERR(folio)) > 5222 return; > 5223 ret = __ext4_journalled_invalidate_folio(folio, offset, > 5224 folio_size(folio) - offset); > 5225 folio_unlock(folio); > 5226 folio_put(folio); > 5227 if (ret != -EBUSY) > 5228 return; > 5229 commit_tid = 0; > 5230 read_lock(&journal->j_state_lock); > 5231 if (journal->j_committing_transaction) > 5232 commit_tid = journal->j_committing_transaction->t_tid; > 5233 read_unlock(&journal->j_state_lock); > 5234 if (commit_tid) > 5235 jbd2_log_wait_commit(journal, commit_tid); > 5236 } > 5237 We only wait commit if tid is not zero. > > And in __jbd2_log_wait_for_space() > > 79 if (space_left < nblocks) { > 80 int chkpt = journal->j_checkpoint_transactions != NULL; > 81 tid_t tid = 0; > 82 > 83 if (journal->j_committing_transaction) > 84 tid = journal->j_committing_transaction->t_tid; > 85 spin_unlock(&journal->j_list_lock); > 86 write_unlock(&journal->j_state_lock); > 87 if (chkpt) { > 88 jbd2_log_do_checkpoint(journal); > 89 } else if (jbd2_cleanup_journal_tail(journal) == 0) { > 90 /* We were able to recover space; yay! */ > 91 ; > 92 } else if (tid) { > 93 /* > 94 * jbd2_journal_commit_transaction() may want > 95 * to take the checkpoint_mutex if JBD2_FLUSHED > 96 * is set. So we need to temporarily drop it. > 97 */ > 98 mutex_unlock(&journal->j_checkpoint_mutex); > 99 jbd2_log_wait_commit(journal, tid); > 100 write_lock(&journal->j_state_lock); > 101 continue; > We also only wait commit if tid is not zero. > > Does it mean all these have bugs if '0' is a valid 'tid' ? > > But on the other hand, if we don't consider sync and fsync, and default commit interval is 5s, > > time of tid wrap to 0 is nearly 680 years. However, we can run sync/fsync to make tid to increase > > more quickly in real world ? The simple solution is that "0" is not a valid sequence. It looks like this is a bug in jbd2_get_transaction() where it is incrementing the TID: transaction->t_tid = journal->j_transaction_sequence++; it should add a check to handle the wrap-around: if (unlikely(transaction->t_tid == 0)) transaction->t_tid = journal->j_transaction_sequence++; Cheers, Andreas
On 2024/7/12 3:28, Andreas Dilger wrote: > On Jul 11, 2024, at 10:16 AM, Wang Jianjian <wangjianjian0@foxmail.com> wrote: >> On 2024/7/11 23:16, Luis Henriques wrote: >>> On Thu, Jul 11 2024, wangjianjian (C) wrote: >>> >>>> On 2024/7/11 16:35, Luis Henriques (SUSE) wrote: >>>>> When a full journal commit is on-going, any fast commit has to be enqueued >>>>> into a different queue: FC_Q_STAGING instead of FC_Q_MAIN. This enqueueing >>>>> is done only once, i.e. if an inode is already queued in a previous fast >>>>> commit entry it won't be enqueued again. However, if a full commit starts >>>>> _after_ the inode is enqueued into FC_Q_MAIN, the next fast commit needs to >>>>> be done into FC_Q_STAGING. And this is not being done in function >>>>> ext4_fc_track_template(). >>>>> This patch fixes the issue by re-enqueuing an inode into the STAGING queue >>>>> during the fast commit clean-up callback if it has a tid (i_sync_tid) >>>>> greater than the one being handled. The STAGING queue will then be spliced >>>>> back into MAIN. >>>>> This bug was found using fstest generic/047. This test creates several 32k >>>>> bytes files, sync'ing each of them after it's creation, and then shutting >>>>> down the filesystem. Some data may be loss in this operation; for example a >>>>> file may have it's size truncated to zero. >>>>> Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev> >>>>> --- >>>>> Hi! >>>>> v4 of this patch enqueues the inode into STAGING *only* if the current tid >>>>> is non-zero. It will be zero when doing an fc commit, and this would mean >>>>> to always re-enqueue the inode. This fixes the regressions caught by Ted >>>>> in v3 with fstests generic/472 generic/496 generic/643. >>>>> Also, since 2nd patch of v3 has already been merged, I've rebased this patch >>>>> to be applied on top of it. >>>>> fs/ext4/fast_commit.c | 10 ++++++++++ >>>>> 1 file changed, 10 insertions(+) >>>>> diff --git a/fs/ext4/fast_commit.c b/fs/ext4/fast_commit.c >>>>> index 3926a05eceee..facbc8dbbaa2 100644 >>>>> --- a/fs/ext4/fast_commit.c >>>>> +++ b/fs/ext4/fast_commit.c >>>>> @@ -1290,6 +1290,16 @@ static void ext4_fc_cleanup(journal_t *journal, int full, tid_t tid) >>>>> EXT4_STATE_FC_COMMITTING); >>>>> if (tid_geq(tid, iter->i_sync_tid)) >>>>> ext4_fc_reset_inode(&iter->vfs_inode); >>>>> + } else if (tid) { >>>>> + /* >>>>> + * If the tid is valid (i.e. non-zero) re-enqueue the >>>> one quick question about tid, if one disk is using long time and its tid get >>>> wrapped to 0, is it a valid seq? I don't find code handling this situation. >>> Hmm... OK. So, to answer to your question, the 'tid' is expected to wrap. >>> That's why we use: >>> >>> if (tid_geq(tid, iter->i_sync_tid)) >> Yes, I know this. >>> >>> instead of: >>> >>> if (tid >= iter->i_sync_tid) >>> >>> (The second patch in v3 actually fixed a few places where the tid_*() >>> helpers weren't being used.) >>> >>> But your question shows me that my patch is wrong as '0' may actually be a >>> valid 'tid' value. >> >> Actually my question is, there are some place use '0' to check if a transaction is valid, e.g. >> >> In ext4_wait_for_tail_page_commit() >> >> 5218 while (1) { >> 5219 struct folio *folio = filemap_lock_folio(inode->i_mapping, >> 5220 inode->i_size >> PAGE_SHIFT); >> 5221 if (IS_ERR(folio)) >> 5222 return; >> 5223 ret = __ext4_journalled_invalidate_folio(folio, offset, >> 5224 folio_size(folio) - offset); >> 5225 folio_unlock(folio); >> 5226 folio_put(folio); >> 5227 if (ret != -EBUSY) >> 5228 return; >> 5229 commit_tid = 0; >> 5230 read_lock(&journal->j_state_lock); >> 5231 if (journal->j_committing_transaction) >> 5232 commit_tid = journal->j_committing_transaction->t_tid; >> 5233 read_unlock(&journal->j_state_lock); >> 5234 if (commit_tid) >> 5235 jbd2_log_wait_commit(journal, commit_tid); >> 5236 } >> 5237 We only wait commit if tid is not zero. >> >> And in __jbd2_log_wait_for_space() >> >> 79 if (space_left < nblocks) { >> 80 int chkpt = journal->j_checkpoint_transactions != NULL; >> 81 tid_t tid = 0; >> 82 >> 83 if (journal->j_committing_transaction) >> 84 tid = journal->j_committing_transaction->t_tid; >> 85 spin_unlock(&journal->j_list_lock); >> 86 write_unlock(&journal->j_state_lock); >> 87 if (chkpt) { >> 88 jbd2_log_do_checkpoint(journal); >> 89 } else if (jbd2_cleanup_journal_tail(journal) == 0) { >> 90 /* We were able to recover space; yay! */ >> 91 ; >> 92 } else if (tid) { >> 93 /* >> 94 * jbd2_journal_commit_transaction() may want >> 95 * to take the checkpoint_mutex if JBD2_FLUSHED >> 96 * is set. So we need to temporarily drop it. >> 97 */ >> 98 mutex_unlock(&journal->j_checkpoint_mutex); >> 99 jbd2_log_wait_commit(journal, tid); >> 100 write_lock(&journal->j_state_lock); >> 101 continue; >> We also only wait commit if tid is not zero. >> >> Does it mean all these have bugs if '0' is a valid 'tid' ? >> >> But on the other hand, if we don't consider sync and fsync, and default commit interval is 5s, >> >> time of tid wrap to 0 is nearly 680 years. However, we can run sync/fsync to make tid to increase >> >> more quickly in real world ? > > The simple solution is that "0" is not a valid sequence. It looks like > this is a bug in jbd2_get_transaction() where it is incrementing the TID: > > transaction->t_tid = journal->j_transaction_sequence++; > > it should add a check to handle the wrap-around: > > if (unlikely(transaction->t_tid == 0)) > transaction->t_tid = journal->j_transaction_sequence++; Yes, I had ever thought about this, just curious why nobody encounter problems here. > > Cheers, Andreas > > > > >
On Thu, Jul 11 2024, Andreas Dilger wrote: > On Jul 11, 2024, at 10:16 AM, Wang Jianjian <wangjianjian0@foxmail.com> wrote: >> On 2024/7/11 23:16, Luis Henriques wrote: >>> On Thu, Jul 11 2024, wangjianjian (C) wrote: >>> >>>> On 2024/7/11 16:35, Luis Henriques (SUSE) wrote: >>>>> When a full journal commit is on-going, any fast commit has to be enqueued >>>>> into a different queue: FC_Q_STAGING instead of FC_Q_MAIN. This enqueueing >>>>> is done only once, i.e. if an inode is already queued in a previous fast >>>>> commit entry it won't be enqueued again. However, if a full commit starts >>>>> _after_ the inode is enqueued into FC_Q_MAIN, the next fast commit needs to >>>>> be done into FC_Q_STAGING. And this is not being done in function >>>>> ext4_fc_track_template(). >>>>> This patch fixes the issue by re-enqueuing an inode into the STAGING queue >>>>> during the fast commit clean-up callback if it has a tid (i_sync_tid) >>>>> greater than the one being handled. The STAGING queue will then be spliced >>>>> back into MAIN. >>>>> This bug was found using fstest generic/047. This test creates several 32k >>>>> bytes files, sync'ing each of them after it's creation, and then shutting >>>>> down the filesystem. Some data may be loss in this operation; for example a >>>>> file may have it's size truncated to zero. >>>>> Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev> >>>>> --- >>>>> Hi! >>>>> v4 of this patch enqueues the inode into STAGING *only* if the current tid >>>>> is non-zero. It will be zero when doing an fc commit, and this would mean >>>>> to always re-enqueue the inode. This fixes the regressions caught by Ted >>>>> in v3 with fstests generic/472 generic/496 generic/643. >>>>> Also, since 2nd patch of v3 has already been merged, I've rebased this patch >>>>> to be applied on top of it. >>>>> fs/ext4/fast_commit.c | 10 ++++++++++ >>>>> 1 file changed, 10 insertions(+) >>>>> diff --git a/fs/ext4/fast_commit.c b/fs/ext4/fast_commit.c >>>>> index 3926a05eceee..facbc8dbbaa2 100644 >>>>> --- a/fs/ext4/fast_commit.c >>>>> +++ b/fs/ext4/fast_commit.c >>>>> @@ -1290,6 +1290,16 @@ static void ext4_fc_cleanup(journal_t *journal, int full, tid_t tid) >>>>> EXT4_STATE_FC_COMMITTING); >>>>> if (tid_geq(tid, iter->i_sync_tid)) >>>>> ext4_fc_reset_inode(&iter->vfs_inode); >>>>> + } else if (tid) { >>>>> + /* >>>>> + * If the tid is valid (i.e. non-zero) re-enqueue the >>>> one quick question about tid, if one disk is using long time and its tid get >>>> wrapped to 0, is it a valid seq? I don't find code handling this situation. >>> Hmm... OK. So, to answer to your question, the 'tid' is expected to wrap. >>> That's why we use: >>> >>> if (tid_geq(tid, iter->i_sync_tid)) >> Yes, I know this. >>> >>> instead of: >>> >>> if (tid >= iter->i_sync_tid) >>> >>> (The second patch in v3 actually fixed a few places where the tid_*() >>> helpers weren't being used.) >>> >>> But your question shows me that my patch is wrong as '0' may actually be a >>> valid 'tid' value. >> >> Actually my question is, there are some place use '0' to check if a transaction is valid, e.g. >> >> In ext4_wait_for_tail_page_commit() >> >> 5218 while (1) { >> 5219 struct folio *folio = filemap_lock_folio(inode->i_mapping, >> 5220 inode->i_size >> PAGE_SHIFT); >> 5221 if (IS_ERR(folio)) >> 5222 return; >> 5223 ret = __ext4_journalled_invalidate_folio(folio, offset, >> 5224 folio_size(folio) - offset); >> 5225 folio_unlock(folio); >> 5226 folio_put(folio); >> 5227 if (ret != -EBUSY) >> 5228 return; >> 5229 commit_tid = 0; >> 5230 read_lock(&journal->j_state_lock); >> 5231 if (journal->j_committing_transaction) >> 5232 commit_tid = journal->j_committing_transaction->t_tid; >> 5233 read_unlock(&journal->j_state_lock); >> 5234 if (commit_tid) >> 5235 jbd2_log_wait_commit(journal, commit_tid); >> 5236 } >> 5237 We only wait commit if tid is not zero. >> >> And in __jbd2_log_wait_for_space() >> >> 79 if (space_left < nblocks) { >> 80 int chkpt = journal->j_checkpoint_transactions != NULL; >> 81 tid_t tid = 0; >> 82 >> 83 if (journal->j_committing_transaction) >> 84 tid = journal->j_committing_transaction->t_tid; >> 85 spin_unlock(&journal->j_list_lock); >> 86 write_unlock(&journal->j_state_lock); >> 87 if (chkpt) { >> 88 jbd2_log_do_checkpoint(journal); >> 89 } else if (jbd2_cleanup_journal_tail(journal) == 0) { >> 90 /* We were able to recover space; yay! */ >> 91 ; >> 92 } else if (tid) { >> 93 /* >> 94 * jbd2_journal_commit_transaction() may want >> 95 * to take the checkpoint_mutex if JBD2_FLUSHED >> 96 * is set. So we need to temporarily drop it. >> 97 */ >> 98 mutex_unlock(&journal->j_checkpoint_mutex); >> 99 jbd2_log_wait_commit(journal, tid); >> 100 write_lock(&journal->j_state_lock); >> 101 continue; >> We also only wait commit if tid is not zero. >> >> Does it mean all these have bugs if '0' is a valid 'tid' ? >> >> But on the other hand, if we don't consider sync and fsync, and default commit interval is 5s, >> >> time of tid wrap to 0 is nearly 680 years. However, we can run sync/fsync to make tid to increase >> >> more quickly in real world ? > > The simple solution is that "0" is not a valid sequence. It looks like > this is a bug in jbd2_get_transaction() where it is incrementing the TID: > > transaction->t_tid = journal->j_transaction_sequence++; > > it should add a check to handle the wrap-around: > > if (unlikely(transaction->t_tid == 0)) > transaction->t_tid = journal->j_transaction_sequence++; Sound good to me. I can prepare a patch with this change if no one else sees other issues. As far as I can see, this shouldn't be a problem even when replaying journals that still have a '0' tid. Thanks, Andreas. And thanks Wang, for spotting this. Cheers,
On Thu 11-07-24 09:35:20, Luis Henriques (SUSE) wrote: > When a full journal commit is on-going, any fast commit has to be enqueued > into a different queue: FC_Q_STAGING instead of FC_Q_MAIN. This enqueueing > is done only once, i.e. if an inode is already queued in a previous fast > commit entry it won't be enqueued again. However, if a full commit starts > _after_ the inode is enqueued into FC_Q_MAIN, the next fast commit needs to > be done into FC_Q_STAGING. And this is not being done in function > ext4_fc_track_template(). > > This patch fixes the issue by re-enqueuing an inode into the STAGING queue > during the fast commit clean-up callback if it has a tid (i_sync_tid) > greater than the one being handled. The STAGING queue will then be spliced > back into MAIN. > > This bug was found using fstest generic/047. This test creates several 32k > bytes files, sync'ing each of them after it's creation, and then shutting > down the filesystem. Some data may be loss in this operation; for example a > file may have it's size truncated to zero. > > Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev> ... > diff --git a/fs/ext4/fast_commit.c b/fs/ext4/fast_commit.c > index 3926a05eceee..facbc8dbbaa2 100644 > --- a/fs/ext4/fast_commit.c > +++ b/fs/ext4/fast_commit.c > @@ -1290,6 +1290,16 @@ static void ext4_fc_cleanup(journal_t *journal, int full, tid_t tid) > EXT4_STATE_FC_COMMITTING); > if (tid_geq(tid, iter->i_sync_tid)) > ext4_fc_reset_inode(&iter->vfs_inode); > + } else if (tid) { > + /* > + * If the tid is valid (i.e. non-zero) re-enqueue the > + * inode into STAGING, which will then be splice back > + * into MAIN > + */ > + list_add_tail(&EXT4_I(&iter->vfs_inode)->i_fc_list, > + &sbi->s_fc_q[FC_Q_STAGING]); > + } I don't think this is going to work (even if we fix the tid 0 being special assumption). With this there would be a race like: Task 1 Task2 modify inode I ext4_fc_commit() jbd2_fc_begin_commit() commits changes jbd2_fc_end_commit() __jbd2_fc_end_commit(journal, 0, false) jbd2_journal_unlock_updates(journal) jbd2_journal_start() modify inode I ... ext4_mark_iloc_dirty() ext4_fc_track_inode() ext4_fc_track_template() - doesn't add inode anywhere because i_fc_list is not empty ext4_fc_cleanup(journal, 0, 0) removes inode I from i_fc_list => next fastcommit will not properly flush it. To avoid this race I think we could move the journal->j_fc_cleanup_callback() call to happen before we call jbd2_journal_unlock_updates(). Then we are sure that inode cannot be modified (journal is locked) until we are done processing the fastcommit lists when doing fastcommit. Hence your patch could then be changed like: + } else if (full) { + /* + * We are called after a full commit, inode has been + * modified while the commit was running. Re-enqueue + * the inode into STAGING, which will then be splice + * back into MAIN. This cannot happen during + * fastcommit because the journal is locked all the + * time in that case (and tid doesn't increase so + * tid check above isn't reliable). + */ + list_add_tail(&EXT4_I(&iter->vfs_inode)->i_fc_list, + &sbi->s_fc_q[FC_Q_STAGING]); + } Later, Harshad's patches change the code to use EXT4_STATE_FC_COMMITTING for protecting inodes during fastcommit and that will also deal with these races without having to keep the whole journal locked. Honza
On Tue, Jul 16 2024, Jan Kara wrote: > On Thu 11-07-24 09:35:20, Luis Henriques (SUSE) wrote: >> When a full journal commit is on-going, any fast commit has to be enqueued >> into a different queue: FC_Q_STAGING instead of FC_Q_MAIN. This enqueueing >> is done only once, i.e. if an inode is already queued in a previous fast >> commit entry it won't be enqueued again. However, if a full commit starts >> _after_ the inode is enqueued into FC_Q_MAIN, the next fast commit needs to >> be done into FC_Q_STAGING. And this is not being done in function >> ext4_fc_track_template(). >> >> This patch fixes the issue by re-enqueuing an inode into the STAGING queue >> during the fast commit clean-up callback if it has a tid (i_sync_tid) >> greater than the one being handled. The STAGING queue will then be spliced >> back into MAIN. >> >> This bug was found using fstest generic/047. This test creates several 32k >> bytes files, sync'ing each of them after it's creation, and then shutting >> down the filesystem. Some data may be loss in this operation; for example a >> file may have it's size truncated to zero. >> >> Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev> > > ... > >> diff --git a/fs/ext4/fast_commit.c b/fs/ext4/fast_commit.c >> index 3926a05eceee..facbc8dbbaa2 100644 >> --- a/fs/ext4/fast_commit.c >> +++ b/fs/ext4/fast_commit.c >> @@ -1290,6 +1290,16 @@ static void ext4_fc_cleanup(journal_t *journal, int full, tid_t tid) >> EXT4_STATE_FC_COMMITTING); >> if (tid_geq(tid, iter->i_sync_tid)) >> ext4_fc_reset_inode(&iter->vfs_inode); >> + } else if (tid) { >> + /* >> + * If the tid is valid (i.e. non-zero) re-enqueue the >> + * inode into STAGING, which will then be splice back >> + * into MAIN >> + */ >> + list_add_tail(&EXT4_I(&iter->vfs_inode)->i_fc_list, >> + &sbi->s_fc_q[FC_Q_STAGING]); >> + } > > I don't think this is going to work (even if we fix the tid 0 being special > assumption). With this there would be a race like: > > Task 1 Task2 > modify inode I > ext4_fc_commit() > jbd2_fc_begin_commit() > commits changes > jbd2_fc_end_commit() > __jbd2_fc_end_commit(journal, 0, false) > jbd2_journal_unlock_updates(journal) > jbd2_journal_start() > modify inode I > ... > ext4_mark_iloc_dirty() > ext4_fc_track_inode() > ext4_fc_track_template() > - doesn't add inode anywhere > because i_fc_list is not empty > ext4_fc_cleanup(journal, 0, 0) > removes inode I from i_fc_list => next fastcommit will not properly > flush it. > > To avoid this race I think we could move the > journal->j_fc_cleanup_callback() call to happen before we call > jbd2_journal_unlock_updates(). Then we are sure that inode cannot be > modified (journal is locked) until we are done processing the fastcommit > lists when doing fastcommit. Hence your patch could then be changed like: > > + } else if (full) { > + /* > + * We are called after a full commit, inode has been > + * modified while the commit was running. Re-enqueue > + * the inode into STAGING, which will then be splice > + * back into MAIN. This cannot happen during > + * fastcommit because the journal is locked all the > + * time in that case (and tid doesn't increase so > + * tid check above isn't reliable). > + */ > + list_add_tail(&EXT4_I(&iter->vfs_inode)->i_fc_list, > + &sbi->s_fc_q[FC_Q_STAGING]); > + } > > Later, Harshad's patches change the code to use EXT4_STATE_FC_COMMITTING > for protecting inodes during fastcommit and that will also deal with these > races without having to keep the whole journal locked. OK, this looks like it should fix all the issues I was trying to fix (g/047, g/472, and a few others Ted pointed out). I'll go run a few more tests on this to try to catch any possible regression. Once again, thanks a lot for your help, Jan. Cheers,
diff --git a/fs/ext4/fast_commit.c b/fs/ext4/fast_commit.c index 3926a05eceee..facbc8dbbaa2 100644 --- a/fs/ext4/fast_commit.c +++ b/fs/ext4/fast_commit.c @@ -1290,6 +1290,16 @@ static void ext4_fc_cleanup(journal_t *journal, int full, tid_t tid) EXT4_STATE_FC_COMMITTING); if (tid_geq(tid, iter->i_sync_tid)) ext4_fc_reset_inode(&iter->vfs_inode); + } else if (tid) { + /* + * If the tid is valid (i.e. non-zero) re-enqueue the + * inode into STAGING, which will then be splice back + * into MAIN + */ + list_add_tail(&EXT4_I(&iter->vfs_inode)->i_fc_list, + &sbi->s_fc_q[FC_Q_STAGING]); + } + /* Make sure EXT4_STATE_FC_COMMITTING bit is clear */ smp_mb(); #if (BITS_PER_LONG < 64)
When a full journal commit is on-going, any fast commit has to be enqueued into a different queue: FC_Q_STAGING instead of FC_Q_MAIN. This enqueueing is done only once, i.e. if an inode is already queued in a previous fast commit entry it won't be enqueued again. However, if a full commit starts _after_ the inode is enqueued into FC_Q_MAIN, the next fast commit needs to be done into FC_Q_STAGING. And this is not being done in function ext4_fc_track_template(). This patch fixes the issue by re-enqueuing an inode into the STAGING queue during the fast commit clean-up callback if it has a tid (i_sync_tid) greater than the one being handled. The STAGING queue will then be spliced back into MAIN. This bug was found using fstest generic/047. This test creates several 32k bytes files, sync'ing each of them after it's creation, and then shutting down the filesystem. Some data may be loss in this operation; for example a file may have it's size truncated to zero. Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev> --- Hi! v4 of this patch enqueues the inode into STAGING *only* if the current tid is non-zero. It will be zero when doing an fc commit, and this would mean to always re-enqueue the inode. This fixes the regressions caught by Ted in v3 with fstests generic/472 generic/496 generic/643. Also, since 2nd patch of v3 has already been merged, I've rebased this patch to be applied on top of it. fs/ext4/fast_commit.c | 10 ++++++++++ 1 file changed, 10 insertions(+)