| Message ID | 20240624104239.132159-2-thippesw@amd.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for Xilinx XDMA Soft IP as Root Port | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dt-meta-schema | fail | build log |
On Mon, 24 Jun 2024 16:12:38 +0530, Thippeswamy Havalige wrote: > Add YAML devicetree schemas for Xilinx QDMA Soft IP PCIe Root Port Bridge. > > Signed-off-by: Thippeswamy Havalige <thippesw@amd.com> > --- > .../devicetree/bindings/pci/xlnx,xdma-host.yaml | 41 ++++++++++++++++++++-- > 1 file changed, 39 insertions(+), 2 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dts:55.31-79.15: Warning (pci_bridge): /example-0/soc/axi-pcie@80000000: node name is not "pci" or "pcie" Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge' Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge' Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge' /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: axi-pcie@80000000: $nodename:0: 'axi-pcie@80000000' does not match '^pcie?@' from schema $id: http://devicetree.org/schemas/pci/xlnx,xdma-host.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: axi-pcie@80000000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'device_type' were unexpected) from schema $id: http://devicetree.org/schemas/pci/xlnx,xdma-host.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240624104239.132159-2-thippesw@amd.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml index 2f59b3a..b705e47 100644 --- a/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml +++ b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml @@ -14,10 +14,21 @@ allOf: properties: compatible: - const: xlnx,xdma-host-3.00 + enum: + - xlnx,xdma-host-3.00 + - xlnx,qdma-host-3.00 reg: - maxItems: 1 + items: + - description: configuration region and XDMA bridge register. + - description: QDMA bridge register. + minItems: 1 + + reg-names: + items: + - const: cfg + - const: breg + minItems: 1 ranges: maxItems: 2 @@ -111,4 +122,30 @@ examples: interrupt-controller; }; }; + + axi-pcie@80000000 { + compatible = "xlnx,qdma-host-3.00"; + reg = <0x0 0x80000000 0x0 0x10000000>, <0x0 0x90000000 0x0 0x10000000>; + reg-names = "cfg", "breg"; + ranges = <0x2000000 0x0 0xa8000000 0x0 0xa8000000 0x0 0x8000000>, + <0x43000000 0x4 0x80000000 0x4 0x80000000 0x0 0x40000000>; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "misc", "msi0", "msi1"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc_0 0>, + <0 0 0 2 &pcie_intc_0 1>, + <0 0 0 3 &pcie_intc_0 2>, + <0 0 0 4 &pcie_intc_0 3>; + pcie_intc_1: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; };
Add YAML devicetree schemas for Xilinx QDMA Soft IP PCIe Root Port Bridge. Signed-off-by: Thippeswamy Havalige <thippesw@amd.com> --- .../devicetree/bindings/pci/xlnx,xdma-host.yaml | 41 ++++++++++++++++++++-- 1 file changed, 39 insertions(+), 2 deletions(-)