mbox series

[GIT,PULL] xilinx patches for v2024.10-rc1

Message ID 8a2e058d-5424-46de-bcf7-87ff574d25b2@amd.com
State Accepted
Delegated to: Tom Rini
Headers show
Series [GIT,PULL] xilinx patches for v2024.10-rc1 | expand

Pull-request

git@source.denx.de:u-boot/custodians/u-boot-microblaze.git tags/xilinx-for-v2024.10-rc1

Message

Michal Simek June 17, 2024, 4:12 p.m. UTC 
Hi Tom,

please pull these patches to your tree. Gitlab CI is not showing any issue.
There are some alignments and improvements but overall nothing significant. The 
biggest patchset is add support for new AMD Versal Gen 2 SoC.

Thanks,
Michal


The following changes since commit 0786dd573d0793417852e009dee3148ebdd163f3:

   test/py: net_boot: Add test cases for net boot (2024-06-13 16:31:24 -0600)

are available in the Git repository at:

   git@source.denx.de:u-boot/custodians/u-boot-microblaze.git 
tags/xilinx-for-v2024.10-rc1

for you to fetch changes up to e4a11e984d11cf4bbe55385cbae03c08f27ecd02:

   xilinx: Enable FF-A for all our arm64 SoCs (2024-06-17 16:02:30 +0200)

----------------------------------------------------------------
AMD/Xilinx changes for v2024.10-rc1

common:
- spl: Introduce SoC specific init function

xilinx:
- Enable FF-A and NVMEM
- Rename spl_board_init() to spl_soc_init()

zynqmp:
- DT alignments
- Enable reset from SPL
- Enable USB3 for KD240
- Align multiboot register on Kria for proper reboot
- Allow multiboot environment write even in saved environment
- Move zynqmp commands from board/ to arch/
- Clean up xilinx_zynqmp.h

versal:
- Do not prioritize boot device if driver is not enabled

versal-net:
- Setup location for redundant variables in SPI

versal2:
- Add support for new SOC

mmc:
- Fix tap delay for SD on Versal NET

spi:
- Add SPI_NOR_OCTAL_READ flag for mx66uw2g345gx0 flash part

gpio:
- Cover MODEPIN firmware dependency

----------------------------------------------------------------
Charlie Johnston (1):
       board: zynqmp: Move zynqmp commands from board/ to arch/

Kory Maincent (1):
       xilinx: zynqmp: Allow multiboot environment write even in saved environment

Lukas Funke (3):
       spl: Introduce SoC specific init function
       arm64: zynq(mp): Rename spl_board_init() to spl_soc_init()
       xilinx: zynqmp: Enable reset_cpu() in SPL

Michal Simek (11):
       xilinx: zynqmp: Clean up xilinx_zynqmp.h
       xilinx: Enable NVMEM framework for all platforms
       arm64: zynqmp: Update rproc node
       arm64: versal2: Add support for AMD Versal Gen 2
       soc: versal2: Add SoC driver for AMD Versal Gen 2
       mmc: versal2: Update zynq_sdhci driver to support AMD Versal Gen 2
       spi: versal2: Enable spi drivers for Versal Gen 2
       arm64: zynqmp: Setup multiboot register to 0
       arm64: zynqmp: Align #address/size-cells with node
       gpio: Add proper dependency on ZYNQMP_FIRMWARE
       xilinx: Enable FF-A for all our arm64 SoCs

Neal Frager (1):
       arm64: zynqmp: Enable usb3 for k24 som

Prasad Kummari (1):
       mtd: spi-nor: Add SPI_NOR_OCTAL_READ flag for mx66uw2g345gx0 flash part

Simek, Michal (1):
       sdhci: zynq: Fix tap delay for SD on Versal NET

Venkatesh Yadav Abbarapu (2):
       xilinx: versal: Do not prioritize boot device if driver is not enabled
       xilinx: versal-net: Add env redund offset

  arch/arm/Kconfig                                            |  18 +-
  arch/arm/Makefile                                           |   1 +
  arch/arm/dts/Makefile                                       |   2 +
  arch/arm/dts/amd-versal2-virt.dts                           |  11 +
  arch/arm/dts/zynqmp-mini-nand.dts                           |   4 +-
  arch/arm/dts/zynqmp.dtsi                                    |  67 +++-
  arch/arm/mach-versal2/Kconfig                               |  55 ++++
  arch/arm/mach-versal2/Makefile                              |  10 +
  arch/arm/mach-versal2/clk.c                                 |  34 ++
  arch/arm/mach-versal2/cpu.c                                 |  93 ++++++
  arch/arm/mach-versal2/include/mach/hardware.h               |  97 ++++++
  arch/arm/mach-versal2/include/mach/sys_proto.h              |   9 +
  arch/arm/mach-zynq/spl.c                                    |   4 +-
  arch/arm/mach-zynqmp/Kconfig                                |  13 +-
  arch/arm/mach-zynqmp/Makefile                               |   4 +
  arch/arm/mach-zynqmp/spl.c                                  |   4 +-
  board/xilinx/zynqmp/cmds.c => arch/arm/mach-zynqmp/zynqmp.c |   0
  board/amd/common                                            |   1 +
  board/amd/versal2/Kconfig                                   |  16 +
  board/amd/versal2/MAINTAINERS                               |   7 +
  board/amd/versal2/Makefile                                  |  11 +
  board/amd/versal2/board.c                                   | 343 
++++++++++++++++++++
  board/amd/versal2/cmds.c                                    |  81 +++++
  board/xilinx/Kconfig                                        |   6 +-
  board/xilinx/versal/board.c                                 |  15 +
  board/xilinx/zynqmp/Kconfig                                 |  19 --
  board/xilinx/zynqmp/Makefile                                |   4 -
  board/xilinx/zynqmp/zynqmp-sm-k24-revA/psu_init_gpl.c       |  23 +-
  board/xilinx/zynqmp/zynqmp.c                                |  20 +-
  board/xilinx/zynqmp/zynqmp_kria.env                         |   1 +
  common/spl/Kconfig                                          |   7 +
  common/spl/spl.c                                            |   3 +
  configs/amd_versal2_virt_defconfig                          | 151 +++++++++
  configs/xilinx_versal_net_virt_defconfig                    |   3 +
  configs/xilinx_versal_virt_defconfig                        |   2 +
  configs/xilinx_zynq_virt_defconfig                          |   1 +
  configs/xilinx_zynqmp_kria_defconfig                        |   1 +
  configs/xilinx_zynqmp_virt_defconfig                        |   2 +
  drivers/gpio/Kconfig                                        |   4 +-
  drivers/mailbox/Kconfig                                     |   2 +-
  drivers/mmc/zynq_sdhci.c                                    |  24 +-
  drivers/mtd/spi/spi-nor-ids.c                               |   2 +-
  drivers/soc/Kconfig                                         |   8 +
  drivers/soc/Makefile                                        |   1 +
  drivers/soc/soc_amd_versal2.c                               |  77 +++++
  drivers/spi/Kconfig                                         |   2 +-
  drivers/spi/cadence_qspi.c                                  |   3 +-
  drivers/spi/zynqmp_gqspi.c                                  |   6 +-
  env/Kconfig                                                 |   6 +-
  include/configs/amd_versal2.h                               | 143 ++++++++
  include/configs/xilinx_zynqmp.h                             |   6 -
  include/dt-bindings/power/xlnx-zynqmp-power.h               |  17 +-
  include/spl.h                                               |   8 +
  53 files changed, 1359 insertions(+), 93 deletions(-)
  create mode 100644 arch/arm/dts/amd-versal2-virt.dts
  create mode 100644 arch/arm/mach-versal2/Kconfig
  create mode 100644 arch/arm/mach-versal2/Makefile
  create mode 100644 arch/arm/mach-versal2/clk.c
  create mode 100644 arch/arm/mach-versal2/cpu.c
  create mode 100644 arch/arm/mach-versal2/include/mach/hardware.h
  create mode 100644 arch/arm/mach-versal2/include/mach/sys_proto.h
  rename board/xilinx/zynqmp/cmds.c => arch/arm/mach-zynqmp/zynqmp.c (100%)
  create mode 120000 board/amd/common
  create mode 100644 board/amd/versal2/Kconfig
  create mode 100644 board/amd/versal2/MAINTAINERS
  create mode 100644 board/amd/versal2/Makefile
  create mode 100644 board/amd/versal2/board.c
  create mode 100644 board/amd/versal2/cmds.c
  delete mode 100644 board/xilinx/zynqmp/Kconfig
  create mode 100644 configs/amd_versal2_virt_defconfig
  create mode 100644 drivers/soc/soc_amd_versal2.c
  create mode 100644 include/configs/amd_versal2.h

Comments

Tom Rini June 17, 2024, 7:07 p.m. UTC | #1 
On Mon, Jun 17, 2024 at 06:12:06PM +0200, Michal Simek wrote:

> Hi Tom,
> 
> please pull these patches to your tree. Gitlab CI is not showing any issue.
> There are some alignments and improvements but overall nothing significant.
> The biggest patchset is add support for new AMD Versal Gen 2 SoC.
> 
> Thanks,
> Michal
> 
> 
> The following changes since commit 0786dd573d0793417852e009dee3148ebdd163f3:
> 
>   test/py: net_boot: Add test cases for net boot (2024-06-13 16:31:24 -0600)
> 
> are available in the Git repository at:
> 
>   git@source.denx.de:u-boot/custodians/u-boot-microblaze.git
> tags/xilinx-for-v2024.10-rc1
> 
> for you to fetch changes up to e4a11e984d11cf4bbe55385cbae03c08f27ecd02:
> 
>   xilinx: Enable FF-A for all our arm64 SoCs (2024-06-17 16:02:30 +0200)
> 

Applied to u-boot/next, thanks!