Message ID | 20240531125229.1733562-1-amusil@redhat.com |
---|---|
State | Superseded |
Headers | show |
Series | [ovs-dev] tests: Fix flaky PMUTD flows test. | expand |
Context | Check | Description |
---|---|---|
ovsrobot/apply-robot | success | apply and check: success |
ovsrobot/github-robot-_Build_and_Test | success | github build: passed |
ovsrobot/github-robot-_ovn-kubernetes | success | github build: passed |
Hi Ales Thanks for the patch. On Fri, May 31, 2024 at 2:52 PM Ales Musil <amusil@redhat.com> wrote: > Add missing sync calls to make sure that the flows are present and > strip the statistics from the flows. > > Fixes: 3faadc76ad71 ("northd: Fix pmtud for non routed traffic.") > Signed-off-by: Ales Musil <amusil@redhat.com> > --- > tests/ovn-controller.at | 42 +++++++++++++++++++++++------------------ > 1 file changed, 24 insertions(+), 18 deletions(-) > > diff --git a/tests/ovn-controller.at b/tests/ovn-controller.at > index fc50b6ff8..3d3825cb8 100644 > --- a/tests/ovn-controller.at > +++ b/tests/ovn-controller.at > @@ -3036,13 +3036,16 @@ check ovs-vsctl \ > -- add-port br-int vif2 \ > -- set Interface vif2 external_ids:iface-id=lsp2 > > +wait_for_ports_up > +check ovn-nbctl --wait=hv sync > + > AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=OFTABLE_CT_ZONE_LOOKUP > | \ > - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, > duration=??, table/' | \ > sed -e > 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ > - grep -v NXST_FLOW |sort], [0], [dnl > - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, > n_bytes=0, idle_age=0, priority=0 > actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, > n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, > n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > + grep -v NXST_FLOW | \ > + awk '{print $7, $8}' | sort], [0], [dnl > +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > +priority=100,reg14=0x1,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > +priority=100,reg14=0x2,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > ]) > > In addition to your change, I have seen a different kind of failure for this test: on some systems, the test always fails because ct_zones id are different, and hence reg11 and reg12 are filled with different values. I think that this happens depending on whether the system uses murmur or crc for hashing. Hence, I think we should also sed/replace the values loaded in reg11 and reg12 as we do for reg13. Same comment applies to the similar checks below. I have such a system where tests are failing. So, if it's easier for you, let me know if you'd like me to apply a further patch, or test your changes, or provide access to the system. check ovn-nbctl lsp-add ls1 lsp3 \ > @@ -3051,24 +3054,27 @@ check ovs-vsctl \ > -- add-port br-int vif3 \ > -- set Interface vif3 external_ids:iface-id=lsp3 > > +wait_for_ports_up > +check ovn-nbctl --wait=hv sync > + > AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=OFTABLE_CT_ZONE_LOOKUP > | \ > - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, > duration=??, table/' | \ > sed -e > 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ > - grep -v NXST_FLOW |sort], [0], [dnl > - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, > n_bytes=0, idle_age=0, priority=0 > actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, > n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, > n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, > n_bytes=0, idle_age=0, priority=100,reg14=0x3,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > + grep -v NXST_FLOW | \ > + awk '{print $7, $8}' | sort], [0], [dnl > +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > +priority=100,reg14=0x1,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > +priority=100,reg14=0x2,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > +priority=100,reg14=0x3,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > ]) > > -check ovn-nbctl lsp-del lsp3 > +check ovn-nbctl --wait=hv lsp-del lsp3 > AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=OFTABLE_CT_ZONE_LOOKUP > | \ > - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, > duration=??, table/' | \ > - sed -e > 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | > - grep -v NXST_FLOW |sort], [0], [dnl > - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, > n_bytes=0, idle_age=0, priority=0 > actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, > n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, > n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > + sed -e > 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ > + grep -v NXST_FLOW | \ > + awk '{print $7, $8}' | sort], [0], [dnl > +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > +priority=100,reg14=0x1,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > +priority=100,reg14=0x2,metadata=0x1 > actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) > ]) > > OVN_CLEANUP([hv1]) > -- > 2.45.0 > > Besides the comment above, it looks good to me. Thanks Xavier > _______________________________________________ > dev mailing list > dev@openvswitch.org > https://mail.openvswitch.org/mailman/listinfo/ovs-dev > >
On Tue, Jun 4, 2024 at 2:19 PM Xavier Simonart <xsimonar@redhat.com> wrote: > Hi Ales > > Thanks for the patch. > Hi Xavier, thank you for the review. > On Fri, May 31, 2024 at 2:52 PM Ales Musil <amusil@redhat.com> wrote: > >> Add missing sync calls to make sure that the flows are present and >> strip the statistics from the flows. >> >> Fixes: 3faadc76ad71 ("northd: Fix pmtud for non routed traffic.") >> Signed-off-by: Ales Musil <amusil@redhat.com> >> --- >> tests/ovn-controller.at | 42 +++++++++++++++++++++++------------------ >> 1 file changed, 24 insertions(+), 18 deletions(-) >> >> diff --git a/tests/ovn-controller.at b/tests/ovn-controller.at >> index fc50b6ff8..3d3825cb8 100644 >> --- a/tests/ovn-controller.at >> +++ b/tests/ovn-controller.at >> @@ -3036,13 +3036,16 @@ check ovs-vsctl \ >> -- add-port br-int vif2 \ >> -- set Interface vif2 external_ids:iface-id=lsp2 >> >> +wait_for_ports_up >> +check ovn-nbctl --wait=hv sync >> + >> AT_CHECK([as hv1 ovs-ofctl dump-flows br-int >> table=OFTABLE_CT_ZONE_LOOKUP | \ >> - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, >> duration=??, table/' | \ >> sed -e >> 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ >> - grep -v NXST_FLOW |sort], [0], [dnl >> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >> n_bytes=0, idle_age=0, priority=0 >> actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >> n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >> n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> + grep -v NXST_FLOW | \ >> + awk '{print $7, $8}' | sort], [0], [dnl >> +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> +priority=100,reg14=0x1,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> +priority=100,reg14=0x2,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> ]) >> >> In addition to your change, I have seen a different kind of failure for > this test: on some systems, the test always fails because ct_zones id are > different, and hence reg11 and reg12 are filled with different values. > I think that this happens depending on whether the system uses murmur or > crc for hashing. > Hence, I think we should also sed/replace the values loaded in reg11 and > reg12 as we do for reg13. > Same comment applies to the similar checks below. > I have such a system where tests are failing. So, if it's easier for you, > let me know if you'd like me to apply a further patch, or test your > changes, or provide access to the system. > It makes sense, I agree that we should replace all loads and the reg values, which makes me wonder if it isn't actually better to just count the flows instead WDYT? > > check ovn-nbctl lsp-add ls1 lsp3 \ >> @@ -3051,24 +3054,27 @@ check ovs-vsctl \ >> -- add-port br-int vif3 \ >> -- set Interface vif3 external_ids:iface-id=lsp3 >> >> +wait_for_ports_up >> +check ovn-nbctl --wait=hv sync >> + >> AT_CHECK([as hv1 ovs-ofctl dump-flows br-int >> table=OFTABLE_CT_ZONE_LOOKUP | \ >> - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, >> duration=??, table/' | \ >> sed -e >> 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ >> - grep -v NXST_FLOW |sort], [0], [dnl >> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >> n_bytes=0, idle_age=0, priority=0 >> actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >> n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >> n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >> n_bytes=0, idle_age=0, priority=100,reg14=0x3,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> + grep -v NXST_FLOW | \ >> + awk '{print $7, $8}' | sort], [0], [dnl >> +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> +priority=100,reg14=0x1,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> +priority=100,reg14=0x2,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> +priority=100,reg14=0x3,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> ]) >> >> -check ovn-nbctl lsp-del lsp3 >> +check ovn-nbctl --wait=hv lsp-del lsp3 >> AT_CHECK([as hv1 ovs-ofctl dump-flows br-int >> table=OFTABLE_CT_ZONE_LOOKUP | \ >> - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, >> duration=??, table/' | \ >> - sed -e >> 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | >> - grep -v NXST_FLOW |sort], [0], [dnl >> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >> n_bytes=0, idle_age=0, priority=0 >> actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >> n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >> n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> + sed -e >> 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ >> + grep -v NXST_FLOW | \ >> + awk '{print $7, $8}' | sort], [0], [dnl >> +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> +priority=100,reg14=0x1,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> +priority=100,reg14=0x2,metadata=0x1 >> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >> ]) >> >> OVN_CLEANUP([hv1]) >> -- >> 2.45.0 >> >> Besides the comment above, it looks good to me. > Thanks > Xavier > >> _______________________________________________ >> dev mailing list >> dev@openvswitch.org >> https://mail.openvswitch.org/mailman/listinfo/ovs-dev >> >> Thanks, Ales
Hi Ales On Tue, Jun 4, 2024 at 2:36 PM Ales Musil <amusil@redhat.com> wrote: > > > On Tue, Jun 4, 2024 at 2:19 PM Xavier Simonart <xsimonar@redhat.com> > wrote: > >> Hi Ales >> >> Thanks for the patch. >> > > Hi Xavier, > > thank you for the review. > > >> On Fri, May 31, 2024 at 2:52 PM Ales Musil <amusil@redhat.com> wrote: >> >>> Add missing sync calls to make sure that the flows are present and >>> strip the statistics from the flows. >>> >>> Fixes: 3faadc76ad71 ("northd: Fix pmtud for non routed traffic.") >>> Signed-off-by: Ales Musil <amusil@redhat.com> >>> --- >>> tests/ovn-controller.at | 42 +++++++++++++++++++++++------------------ >>> 1 file changed, 24 insertions(+), 18 deletions(-) >>> >>> diff --git a/tests/ovn-controller.at b/tests/ovn-controller.at >>> index fc50b6ff8..3d3825cb8 100644 >>> --- a/tests/ovn-controller.at >>> +++ b/tests/ovn-controller.at >>> @@ -3036,13 +3036,16 @@ check ovs-vsctl \ >>> -- add-port br-int vif2 \ >>> -- set Interface vif2 external_ids:iface-id=lsp2 >>> >>> +wait_for_ports_up >>> +check ovn-nbctl --wait=hv sync >>> + >>> AT_CHECK([as hv1 ovs-ofctl dump-flows br-int >>> table=OFTABLE_CT_ZONE_LOOKUP | \ >>> - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, >>> duration=??, table/' | \ >>> sed -e >>> 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ >>> - grep -v NXST_FLOW |sort], [0], [dnl >>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>> n_bytes=0, idle_age=0, priority=0 >>> actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>> n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>> n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> + grep -v NXST_FLOW | \ >>> + awk '{print $7, $8}' | sort], [0], [dnl >>> +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> +priority=100,reg14=0x1,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> +priority=100,reg14=0x2,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> ]) >>> >>> In addition to your change, I have seen a different kind of failure for >> this test: on some systems, the test always fails because ct_zones id are >> different, and hence reg11 and reg12 are filled with different values. >> I think that this happens depending on whether the system uses murmur or >> crc for hashing. >> Hence, I think we should also sed/replace the values loaded in reg11 and >> reg12 as we do for reg13. >> Same comment applies to the similar checks below. >> I have such a system where tests are failing. So, if it's easier for you, >> let me know if you'd like me to apply a further patch, or test your >> changes, or provide access to the system. >> > > It makes sense, I agree that we should replace all loads and the reg > values, which makes me wonder if it isn't actually better to just count the > flows instead WDYT? > In fact, I was wondering about almost the opposite (:-)) - we could query the ct-zone-list to find out the zone_id and check whether the flows are exactly what we expect. But then I found that to be really overkill. So, I think that checking the flows (w/ zone-id hidden) seemed a correct trade-off. Also, it makes the test easier to understand (we know what we expect), and make debugging easier if the test fails. WDYT? > > >> >> check ovn-nbctl lsp-add ls1 lsp3 \ >>> @@ -3051,24 +3054,27 @@ check ovs-vsctl \ >>> -- add-port br-int vif3 \ >>> -- set Interface vif3 external_ids:iface-id=lsp3 >>> >>> +wait_for_ports_up >>> +check ovn-nbctl --wait=hv sync >>> + >>> AT_CHECK([as hv1 ovs-ofctl dump-flows br-int >>> table=OFTABLE_CT_ZONE_LOOKUP | \ >>> - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, >>> duration=??, table/' | \ >>> sed -e >>> 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ >>> - grep -v NXST_FLOW |sort], [0], [dnl >>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>> n_bytes=0, idle_age=0, priority=0 >>> actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>> n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>> n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>> n_bytes=0, idle_age=0, priority=100,reg14=0x3,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> + grep -v NXST_FLOW | \ >>> + awk '{print $7, $8}' | sort], [0], [dnl >>> +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> +priority=100,reg14=0x1,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> +priority=100,reg14=0x2,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> +priority=100,reg14=0x3,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> ]) >>> >>> -check ovn-nbctl lsp-del lsp3 >>> +check ovn-nbctl --wait=hv lsp-del lsp3 >>> AT_CHECK([as hv1 ovs-ofctl dump-flows br-int >>> table=OFTABLE_CT_ZONE_LOOKUP | \ >>> - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, >>> duration=??, table/' | \ >>> - sed -e >>> 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | >>> - grep -v NXST_FLOW |sort], [0], [dnl >>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>> n_bytes=0, idle_age=0, priority=0 >>> actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>> n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>> n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> + sed -e >>> 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ >>> + grep -v NXST_FLOW | \ >>> + awk '{print $7, $8}' | sort], [0], [dnl >>> +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> +priority=100,reg14=0x1,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> +priority=100,reg14=0x2,metadata=0x1 >>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>> ]) >>> >>> OVN_CLEANUP([hv1]) >>> -- >>> 2.45.0 >>> >>> Besides the comment above, it looks good to me. >> Thanks >> Xavier >> >>> _______________________________________________ >>> dev mailing list >>> dev@openvswitch.org >>> https://mail.openvswitch.org/mailman/listinfo/ovs-dev >>> >>> > Thanks, > Ales > Thanks Xavier > -- > > Ales Musil > > Senior Software Engineer - OVN Core > > Red Hat EMEA <https://www.redhat.com> > > amusil@redhat.com > <https://red.ht/sig> >
On Tue, Jun 4, 2024 at 2:55 PM Xavier Simonart <xsimonar@redhat.com> wrote: > Hi Ales > > On Tue, Jun 4, 2024 at 2:36 PM Ales Musil <amusil@redhat.com> wrote: > >> >> >> On Tue, Jun 4, 2024 at 2:19 PM Xavier Simonart <xsimonar@redhat.com> >> wrote: >> >>> Hi Ales >>> >>> Thanks for the patch. >>> >> >> Hi Xavier, >> >> thank you for the review. >> >> >>> On Fri, May 31, 2024 at 2:52 PM Ales Musil <amusil@redhat.com> wrote: >>> >>>> Add missing sync calls to make sure that the flows are present and >>>> strip the statistics from the flows. >>>> >>>> Fixes: 3faadc76ad71 ("northd: Fix pmtud for non routed traffic.") >>>> Signed-off-by: Ales Musil <amusil@redhat.com> >>>> --- >>>> tests/ovn-controller.at | 42 +++++++++++++++++++++++------------------ >>>> 1 file changed, 24 insertions(+), 18 deletions(-) >>>> >>>> diff --git a/tests/ovn-controller.at b/tests/ovn-controller.at >>>> index fc50b6ff8..3d3825cb8 100644 >>>> --- a/tests/ovn-controller.at >>>> +++ b/tests/ovn-controller.at >>>> @@ -3036,13 +3036,16 @@ check ovs-vsctl \ >>>> -- add-port br-int vif2 \ >>>> -- set Interface vif2 external_ids:iface-id=lsp2 >>>> >>>> +wait_for_ports_up >>>> +check ovn-nbctl --wait=hv sync >>>> + >>>> AT_CHECK([as hv1 ovs-ofctl dump-flows br-int >>>> table=OFTABLE_CT_ZONE_LOOKUP | \ >>>> - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, >>>> duration=??, table/' | \ >>>> sed -e >>>> 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ >>>> - grep -v NXST_FLOW |sort], [0], [dnl >>>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>>> n_bytes=0, idle_age=0, priority=0 >>>> actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>>> n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>>> n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> + grep -v NXST_FLOW | \ >>>> + awk '{print $7, $8}' | sort], [0], [dnl >>>> +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> +priority=100,reg14=0x1,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> +priority=100,reg14=0x2,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> ]) >>>> >>>> In addition to your change, I have seen a different kind of failure for >>> this test: on some systems, the test always fails because ct_zones id are >>> different, and hence reg11 and reg12 are filled with different values. >>> I think that this happens depending on whether the system uses murmur or >>> crc for hashing. >>> Hence, I think we should also sed/replace the values loaded in reg11 and >>> reg12 as we do for reg13. >>> Same comment applies to the similar checks below. >>> I have such a system where tests are failing. So, if it's easier for >>> you, let me know if you'd like me to apply a further patch, or test your >>> changes, or provide access to the system. >>> >> >> It makes sense, I agree that we should replace all loads and the reg >> values, which makes me wonder if it isn't actually better to just count the >> flows instead WDYT? >> > In fact, I was wondering about almost the opposite (:-)) - we could query > the ct-zone-list to find out the zone_id and check whether the flows are > exactly what we expect. But then I found that to be really overkill. > So, I think that checking the flows (w/ zone-id hidden) seemed a correct > trade-off. Also, it makes the test easier to understand (we know what we > expect), and make debugging easier if the test fails. > WDYT? > I'll do that in v2. Thanks > >> >>> >>> check ovn-nbctl lsp-add ls1 lsp3 \ >>>> @@ -3051,24 +3054,27 @@ check ovs-vsctl \ >>>> -- add-port br-int vif3 \ >>>> -- set Interface vif3 external_ids:iface-id=lsp3 >>>> >>>> +wait_for_ports_up >>>> +check ovn-nbctl --wait=hv sync >>>> + >>>> AT_CHECK([as hv1 ovs-ofctl dump-flows br-int >>>> table=OFTABLE_CT_ZONE_LOOKUP | \ >>>> - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, >>>> duration=??, table/' | \ >>>> sed -e >>>> 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ >>>> - grep -v NXST_FLOW |sort], [0], [dnl >>>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>>> n_bytes=0, idle_age=0, priority=0 >>>> actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>>> n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>>> n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>>> n_bytes=0, idle_age=0, priority=100,reg14=0x3,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> + grep -v NXST_FLOW | \ >>>> + awk '{print $7, $8}' | sort], [0], [dnl >>>> +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> +priority=100,reg14=0x1,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> +priority=100,reg14=0x2,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> +priority=100,reg14=0x3,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> ]) >>>> >>>> -check ovn-nbctl lsp-del lsp3 >>>> +check ovn-nbctl --wait=hv lsp-del lsp3 >>>> AT_CHECK([as hv1 ovs-ofctl dump-flows br-int >>>> table=OFTABLE_CT_ZONE_LOOKUP | \ >>>> - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, >>>> duration=??, table/' | \ >>>> - sed -e >>>> 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | >>>> - grep -v NXST_FLOW |sort], [0], [dnl >>>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>>> n_bytes=0, idle_age=0, priority=0 >>>> actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>>> n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, >>>> n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> + sed -e >>>> 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ >>>> + grep -v NXST_FLOW | \ >>>> + awk '{print $7, $8}' | sort], [0], [dnl >>>> +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> +priority=100,reg14=0x1,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> +priority=100,reg14=0x2,metadata=0x1 >>>> actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) >>>> ]) >>>> >>>> OVN_CLEANUP([hv1]) >>>> -- >>>> 2.45.0 >>>> >>>> Besides the comment above, it looks good to me. >>> Thanks >>> Xavier >>> >>>> _______________________________________________ >>>> dev mailing list >>>> dev@openvswitch.org >>>> https://mail.openvswitch.org/mailman/listinfo/ovs-dev >>>> >>>> >> Thanks, >> Ales >> > Thanks > Xavier > >> -- >> >> Ales Musil >> >> Senior Software Engineer - OVN Core >> >> Red Hat EMEA <https://www.redhat.com> >> >> amusil@redhat.com >> <https://red.ht/sig> >> >
diff --git a/tests/ovn-controller.at b/tests/ovn-controller.at index fc50b6ff8..3d3825cb8 100644 --- a/tests/ovn-controller.at +++ b/tests/ovn-controller.at @@ -3036,13 +3036,16 @@ check ovs-vsctl \ -- add-port br-int vif2 \ -- set Interface vif2 external_ids:iface-id=lsp2 +wait_for_ports_up +check ovn-nbctl --wait=hv sync + AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=OFTABLE_CT_ZONE_LOOKUP | \ - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, duration=??, table/' | \ sed -e 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ - grep -v NXST_FLOW |sort], [0], [dnl - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, n_bytes=0, idle_age=0, priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) + grep -v NXST_FLOW | \ + awk '{print $7, $8}' | sort], [0], [dnl +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) +priority=100,reg14=0x1,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) +priority=100,reg14=0x2,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) ]) check ovn-nbctl lsp-add ls1 lsp3 \ @@ -3051,24 +3054,27 @@ check ovs-vsctl \ -- add-port br-int vif3 \ -- set Interface vif3 external_ids:iface-id=lsp3 +wait_for_ports_up +check ovn-nbctl --wait=hv sync + AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=OFTABLE_CT_ZONE_LOOKUP | \ - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, duration=??, table/' | \ sed -e 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ - grep -v NXST_FLOW |sort], [0], [dnl - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, n_bytes=0, idle_age=0, priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, n_bytes=0, idle_age=0, priority=100,reg14=0x3,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) + grep -v NXST_FLOW | \ + awk '{print $7, $8}' | sort], [0], [dnl +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) +priority=100,reg14=0x1,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) +priority=100,reg14=0x2,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) +priority=100,reg14=0x3,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) ]) -check ovn-nbctl lsp-del lsp3 +check ovn-nbctl --wait=hv lsp-del lsp3 AT_CHECK([as hv1 ovs-ofctl dump-flows br-int table=OFTABLE_CT_ZONE_LOOKUP | \ - sed -e 's/cookie=0x.*, duration=.*, table/cookie=??, duration=??, table/' | \ - sed -e 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | - grep -v NXST_FLOW |sort], [0], [dnl - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, n_bytes=0, idle_age=0, priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, n_bytes=0, idle_age=0, priority=100,reg14=0x1,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) - cookie=??, duration=??, table=OFTABLE_CT_ZONE_LOOKUP, n_packets=0, n_bytes=0, idle_age=0, priority=100,reg14=0x2,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) + sed -e 's/actions=load:0x.*->NXM_NX_REG13/actions=load:0x?->NXM_NX_REG13/' | \ + grep -v NXST_FLOW | \ + awk '{print $7, $8}' | sort], [0], [dnl +priority=0 actions=resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) +priority=100,reg14=0x1,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) +priority=100,reg14=0x2,metadata=0x1 actions=load:0x?->NXM_NX_REG13[[0..15]],load:0x2->NXM_NX_REG11[[]],load:0x1->NXM_NX_REG12[[]],resubmit(,OFTABLE_LOG_INGRESS_PIPELINE) ]) OVN_CLEANUP([hv1])
Add missing sync calls to make sure that the flows are present and strip the statistics from the flows. Fixes: 3faadc76ad71 ("northd: Fix pmtud for non routed traffic.") Signed-off-by: Ales Musil <amusil@redhat.com> --- tests/ovn-controller.at | 42 +++++++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 18 deletions(-)