Message ID | 8b7cca5c7b84cb4854104e0c48f8aa63c4ec5ace.1715322156.git.michal.simek@amd.com |
---|---|
State | Accepted |
Commit | 454f948ff4828ebd5361e9976a8c51087d7cfab1 |
Delegated to: | Michal Simek |
Headers | show |
Series | xilinx: versal: Do not prioritize boot device if driver is not enabled | expand |
On 5/10/24 08:22, Michal Simek wrote: > From: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> > > SOC can boot out of the device which is not accessible from APU and running > this is detected as a warning, as the device is not accessible.For example > getting below warning when the boot mode is OSPI and OSPI is not enabled in > device tree. > Invalid bus 0 (err=-19) > Failed to initialize SPI flash at 0:0 (error -19) > > Ignoring the prioritization of the boot device which driver is not enabled > and continue with the default boot_targets. Recommendation is to use custom > boot_targets via environment file as is done for example for Kria via > zynqmp_kria.env file. > > Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> > Signed-off-by: Michal Simek <michal.simek@amd.com> > --- > > board/xilinx/versal/board.c | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c > index 4f6d56119db1..f00605da7825 100644 > --- a/board/xilinx/versal/board.c > +++ b/board/xilinx/versal/board.c > @@ -151,14 +151,29 @@ static int boot_targets_setup(void) > break; > case QSPI_MODE_24BIT: > puts("QSPI_MODE_24\n"); > + if (uclass_get_device_by_name(UCLASS_SPI, > + "spi@f1030000", &dev)) { > + debug("QSPI driver for QSPI device is not present\n"); > + break; > + } > mode = "xspi0"; > break; > case QSPI_MODE_32BIT: > puts("QSPI_MODE_32\n"); > + if (uclass_get_device_by_name(UCLASS_SPI, > + "spi@f1030000", &dev)) { > + debug("QSPI driver for QSPI device is not present\n"); > + break; > + } > mode = "xspi0"; > break; > case OSPI_MODE: > puts("OSPI_MODE\n"); > + if (uclass_get_device_by_name(UCLASS_SPI, > + "spi@f1010000", &dev)) { > + debug("OSPI driver for OSPI device is not present\n"); > + break; > + } > mode = "xspi0"; > break; > case EMMC_MODE: Applied. M
diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c index 4f6d56119db1..f00605da7825 100644 --- a/board/xilinx/versal/board.c +++ b/board/xilinx/versal/board.c @@ -151,14 +151,29 @@ static int boot_targets_setup(void) break; case QSPI_MODE_24BIT: puts("QSPI_MODE_24\n"); + if (uclass_get_device_by_name(UCLASS_SPI, + "spi@f1030000", &dev)) { + debug("QSPI driver for QSPI device is not present\n"); + break; + } mode = "xspi0"; break; case QSPI_MODE_32BIT: puts("QSPI_MODE_32\n"); + if (uclass_get_device_by_name(UCLASS_SPI, + "spi@f1030000", &dev)) { + debug("QSPI driver for QSPI device is not present\n"); + break; + } mode = "xspi0"; break; case OSPI_MODE: puts("OSPI_MODE\n"); + if (uclass_get_device_by_name(UCLASS_SPI, + "spi@f1010000", &dev)) { + debug("OSPI driver for OSPI device is not present\n"); + break; + } mode = "xspi0"; break; case EMMC_MODE: