mbox

[GIT,PULL] gpio/omap: cleanup and runtime PM conversion for v3.4

Message ID 8762f6fr13.fsf@ti.com
State New
Headers show

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_3.4/gpio/runtime-pm-cleanup

Message

Kevin Hilman Feb. 16, 2012, 8:43 p.m. UTC
Hi Grant,

I've given this a final review and testing and I believe it's ready for
3.4, so here you go.

Also note that Benoit's recently posted GPIO cleanups and DT conversion
depend on this series.

Thanks,

Kevin


The following changes since commit 62aa2b537c6f5957afd98e29f96897419ed5ebab:

  Linux 3.3-rc2 (2012-01-31 13:31:54 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_3.4/gpio/runtime-pm-cleanup

for you to fetch changes up to f86bcc302a8c570dd0f5a50097a6af96a0e717c2:

  gpio/omap: handle set_dataout reg capable IP on restore (2012-02-06 16:58:45 +0530)

----------------------------------------------------------------
Charulatha V (8):
      gpio/omap: remove dependency on gpio_bank_count
      gpio/omap: use flag to identify wakeup domain
      gpio/omap: make gpio_context part of gpio_bank structure
      gpio/omap: make non-wakeup GPIO part of pdata
      gpio/omap: avoid cpu checks during module ena/disable
      gpio/omap: use pinctrl offset instead of macro
      gpio/omap: remove bank->method & METHOD_* macros
      gpio/omap: fix bankwidth for OMAP7xx MPUIO

Nishanth Menon (4):
      gpio/omap: save and restore debounce registers
      gpio/omap: enable irq at the end of all configuration in restore
      gpio/omap: restore OE only after setting the output level
      gpio/omap: handle set_dataout reg capable IP on restore

Tarun Kanti DebBarma (13):
      gpio/omap: handle save/restore context in GPIO driver
      gpio/omap: further cleanup using wkup_en register
      gpio/omap: use level/edge detect reg offsets
      gpio/omap: remove hardcoded offsets in context save/restore
      gpio/omap: cleanup set_gpio_triggering function
      gpio/omap: cleanup omap_gpio_mod_init function
      gpio/omap: remove unnecessary bit-masking for read access
      gpio/omap: use pm-runtime framework
      gpio/omap: optimize suspend and resume functions
      gpio/omap: cleanup prepare_for_idle and resume_after_idle
      gpio/omap: fix debounce clock handling
      gpio/omap: fix incorrect access of debounce module
      gpio/omap: remove omap_gpio_save_context overhead

 arch/arm/mach-omap1/gpio15xx.c         |    7 +-
 arch/arm/mach-omap1/gpio16xx.c         |   47 ++-
 arch/arm/mach-omap1/gpio7xx.c          |   14 +-
 arch/arm/mach-omap2/gpio.c             |   36 +-
 arch/arm/mach-omap2/pm34xx.c           |   14 -
 arch/arm/plat-omap/include/plat/gpio.h |   29 +-
 drivers/gpio/gpio-omap.c               | 1106 +++++++++++++-------------------
 7 files changed, 555 insertions(+), 698 deletions(-)

Comments

Kevin Hilman Feb. 22, 2012, 10:41 p.m. UTC | #1
Hi Grant,

Any objections to this series? Can we get this queued and into linux-next?

I'll have an additional pull request for Benoit's GPIO DT stuff that 
depends on this for v3.4 too after that series is finalized.

Thanks,

Kevin

On 02/16/2012 12:43 PM, Kevin Hilman wrote:
> Hi Grant,
>
> I've given this a final review and testing and I believe it's ready for
> 3.4, so here you go.
>
> Also note that Benoit's recently posted GPIO cleanups and DT conversion
> depend on this series.
>
> Thanks,
>
> Kevin
>
>
> The following changes since commit 62aa2b537c6f5957afd98e29f96897419ed5ebab:
>
>    Linux 3.3-rc2 (2012-01-31 13:31:54 -0800)
>
> are available in the git repository at:
>
>    git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_3.4/gpio/runtime-pm-cleanup
>
> for you to fetch changes up to f86bcc302a8c570dd0f5a50097a6af96a0e717c2:
>
>    gpio/omap: handle set_dataout reg capable IP on restore (2012-02-06 16:58:45 +0530)
>
> ----------------------------------------------------------------
> Charulatha V (8):
>        gpio/omap: remove dependency on gpio_bank_count
>        gpio/omap: use flag to identify wakeup domain
>        gpio/omap: make gpio_context part of gpio_bank structure
>        gpio/omap: make non-wakeup GPIO part of pdata
>        gpio/omap: avoid cpu checks during module ena/disable
>        gpio/omap: use pinctrl offset instead of macro
>        gpio/omap: remove bank->method&  METHOD_* macros
>        gpio/omap: fix bankwidth for OMAP7xx MPUIO
>
> Nishanth Menon (4):
>        gpio/omap: save and restore debounce registers
>        gpio/omap: enable irq at the end of all configuration in restore
>        gpio/omap: restore OE only after setting the output level
>        gpio/omap: handle set_dataout reg capable IP on restore
>
> Tarun Kanti DebBarma (13):
>        gpio/omap: handle save/restore context in GPIO driver
>        gpio/omap: further cleanup using wkup_en register
>        gpio/omap: use level/edge detect reg offsets
>        gpio/omap: remove hardcoded offsets in context save/restore
>        gpio/omap: cleanup set_gpio_triggering function
>        gpio/omap: cleanup omap_gpio_mod_init function
>        gpio/omap: remove unnecessary bit-masking for read access
>        gpio/omap: use pm-runtime framework
>        gpio/omap: optimize suspend and resume functions
>        gpio/omap: cleanup prepare_for_idle and resume_after_idle
>        gpio/omap: fix debounce clock handling
>        gpio/omap: fix incorrect access of debounce module
>        gpio/omap: remove omap_gpio_save_context overhead
>
>   arch/arm/mach-omap1/gpio15xx.c         |    7 +-
>   arch/arm/mach-omap1/gpio16xx.c         |   47 ++-
>   arch/arm/mach-omap1/gpio7xx.c          |   14 +-
>   arch/arm/mach-omap2/gpio.c             |   36 +-
>   arch/arm/mach-omap2/pm34xx.c           |   14 -
>   arch/arm/plat-omap/include/plat/gpio.h |   29 +-
>   drivers/gpio/gpio-omap.c               | 1106 +++++++++++++-------------------
>   7 files changed, 555 insertions(+), 698 deletions(-)
Grant Likely Feb. 23, 2012, 1:37 a.m. UTC | #2
On Wed, Feb 22, 2012 at 02:41:05PM -0800, Kevin Hilman wrote:
> Hi Grant,
> 
> Any objections to this series? Can we get this queued and into linux-next?
> 
> I'll have an additional pull request for Benoit's GPIO DT stuff that
> depends on this for v3.4 too after that series is finalized.

The diffstat is clean.  I've merged it in.

g.

> 
> Thanks,
> 
> Kevin
> 
> On 02/16/2012 12:43 PM, Kevin Hilman wrote:
> >Hi Grant,
> >
> >I've given this a final review and testing and I believe it's ready for
> >3.4, so here you go.
> >
> >Also note that Benoit's recently posted GPIO cleanups and DT conversion
> >depend on this series.
> >
> >Thanks,
> >
> >Kevin
> >
> >
> >The following changes since commit 62aa2b537c6f5957afd98e29f96897419ed5ebab:
> >
> >   Linux 3.3-rc2 (2012-01-31 13:31:54 -0800)
> >
> >are available in the git repository at:
> >
> >   git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git for_3.4/gpio/runtime-pm-cleanup
> >
> >for you to fetch changes up to f86bcc302a8c570dd0f5a50097a6af96a0e717c2:
> >
> >   gpio/omap: handle set_dataout reg capable IP on restore (2012-02-06 16:58:45 +0530)
> >
> >----------------------------------------------------------------
> >Charulatha V (8):
> >       gpio/omap: remove dependency on gpio_bank_count
> >       gpio/omap: use flag to identify wakeup domain
> >       gpio/omap: make gpio_context part of gpio_bank structure
> >       gpio/omap: make non-wakeup GPIO part of pdata
> >       gpio/omap: avoid cpu checks during module ena/disable
> >       gpio/omap: use pinctrl offset instead of macro
> >       gpio/omap: remove bank->method&  METHOD_* macros
> >       gpio/omap: fix bankwidth for OMAP7xx MPUIO
> >
> >Nishanth Menon (4):
> >       gpio/omap: save and restore debounce registers
> >       gpio/omap: enable irq at the end of all configuration in restore
> >       gpio/omap: restore OE only after setting the output level
> >       gpio/omap: handle set_dataout reg capable IP on restore
> >
> >Tarun Kanti DebBarma (13):
> >       gpio/omap: handle save/restore context in GPIO driver
> >       gpio/omap: further cleanup using wkup_en register
> >       gpio/omap: use level/edge detect reg offsets
> >       gpio/omap: remove hardcoded offsets in context save/restore
> >       gpio/omap: cleanup set_gpio_triggering function
> >       gpio/omap: cleanup omap_gpio_mod_init function
> >       gpio/omap: remove unnecessary bit-masking for read access
> >       gpio/omap: use pm-runtime framework
> >       gpio/omap: optimize suspend and resume functions
> >       gpio/omap: cleanup prepare_for_idle and resume_after_idle
> >       gpio/omap: fix debounce clock handling
> >       gpio/omap: fix incorrect access of debounce module
> >       gpio/omap: remove omap_gpio_save_context overhead
> >
> >  arch/arm/mach-omap1/gpio15xx.c         |    7 +-
> >  arch/arm/mach-omap1/gpio16xx.c         |   47 ++-
> >  arch/arm/mach-omap1/gpio7xx.c          |   14 +-
> >  arch/arm/mach-omap2/gpio.c             |   36 +-
> >  arch/arm/mach-omap2/pm34xx.c           |   14 -
> >  arch/arm/plat-omap/include/plat/gpio.h |   29 +-
> >  drivers/gpio/gpio-omap.c               | 1106 +++++++++++++-------------------
> >  7 files changed, 555 insertions(+), 698 deletions(-)
>