Message ID | 20240214165758.986896-1-cassel@kernel.org |
---|---|
State | New |
Headers | show |
Series | [v2] ahci: asm1064: correct count of reported ports | expand |
ср, 14 февр. 2024 г. в 19:58, Niklas Cassel <cassel@kernel.org>: > > From: "Andrey Jr. Melnikov" <temnota.am@gmail.com> > > The ASM1064 SATA host controller always reports wrongly, > that it has 24 ports. But in reality, it only has four ports. > > before: > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > after: > ahci 0000:04:00.0: ASM1064 has only four ports > ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> > Signed-off-by: Niklas Cassel <cassel@kernel.org> > --- > Changes since V1: use switch case. I think we should stop abusing saved_port_map and convert all quirk's to use mask_port_map. > drivers/ata/ahci.c | 14 +++++++++++--- > 1 file changed, 11 insertions(+), 3 deletions(-) > > diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c > index da2e74fce2d9..682ff550ccfb 100644 > --- a/drivers/ata/ahci.c > +++ b/drivers/ata/ahci.c > @@ -671,9 +671,17 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); > static void ahci_pci_save_initial_config(struct pci_dev *pdev, > struct ahci_host_priv *hpriv) > { > - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) { > - dev_info(&pdev->dev, "ASM1166 has only six ports\n"); > - hpriv->saved_port_map = 0x3f; > + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) { > + switch (pdev->device) { > + case 0x1166: > + dev_info(&pdev->dev, "ASM1166 has only six ports\n"); > + hpriv->saved_port_map = 0x3f; > + break; > + case 0x1064: > + dev_info(&pdev->dev, "ASM1064 has only four ports\n"); > + hpriv->saved_port_map = 0xf; > + break; > + } > } > > if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) { > -- > 2.43.0 >
Hello Andrey, On Wed, Feb 14, 2024 at 08:24:25PM +0300, Andrey Melnikov wrote: > ср, 14 февр. 2024 г. в 19:58, Niklas Cassel <cassel@kernel.org>: > > > > From: "Andrey Jr. Melnikov" <temnota.am@gmail.com> > > > > The ASM1064 SATA host controller always reports wrongly, > > that it has 24 ports. But in reality, it only has four ports. > > > > before: > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode > > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > > after: > > ahci 0000:04:00.0: ASM1064 has only four ports > > ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode > > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > > Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> > > Signed-off-by: Niklas Cassel <cassel@kernel.org> > > --- > > Changes since V1: use switch case. > > I think we should stop abusing saved_port_map and convert all quirk's > to use mask_port_map. That sounds like a great idea to me. Do you plan to send some patches? If so, I could hold off this patch until I get something from you. Kind regards, Niklas
On Wed, Feb 14, 2024 at 05:57:57PM +0100, Niklas Cassel wrote: > From: "Andrey Jr. Melnikov" <temnota.am@gmail.com> > > The ASM1064 SATA host controller always reports wrongly, > that it has 24 ports. But in reality, it only has four ports. > > before: > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > after: > ahci 0000:04:00.0: ASM1064 has only four ports > ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> > Signed-off-by: Niklas Cassel <cassel@kernel.org> > --- While I agree with Andrey that we should change the quirks that use saved_port_map to instead use force_port_map (so that we don't have two different ways to apply port_map quirks), that clean up can be done on top of this fix. --- Applied: https://git.kernel.org/pub/scm/linux/kernel/git/libata/linux.git/log/?h=for-6.8-fixes
On Mon, Feb 19, 2024 at 10:30:07AM +0100, Niklas Cassel wrote: > On Wed, Feb 14, 2024 at 05:57:57PM +0100, Niklas Cassel wrote: (snip) > While I agree with Andrey that we should change the quirks that use > saved_port_map to instead use force_port_map (so that we don't have > two different ways to apply port_map quirks), that clean up can be > done on top of this fix. s/force_port_map/mask_port_map/ (force_port_map was the third way of applying these quirks, but it has been removed already.) Kind regards, Niklas
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index da2e74fce2d9..682ff550ccfb 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -671,9 +671,17 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); static void ahci_pci_save_initial_config(struct pci_dev *pdev, struct ahci_host_priv *hpriv) { - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) { - dev_info(&pdev->dev, "ASM1166 has only six ports\n"); - hpriv->saved_port_map = 0x3f; + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) { + switch (pdev->device) { + case 0x1166: + dev_info(&pdev->dev, "ASM1166 has only six ports\n"); + hpriv->saved_port_map = 0x3f; + break; + case 0x1064: + dev_info(&pdev->dev, "ASM1064 has only four ports\n"); + hpriv->saved_port_map = 0xf; + break; + } } if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {