Message ID | vbpzr7uqpfemb3qa6xy2fxioct44l5vugg2wkywyolfpzqcmau@jgrrhmk2scaj |
---|---|
State | New |
Headers | show |
Series | ahci: asm1064: correct count of reported ports | expand |
Hi Andrey On 2/7/24 10:58, Andrey Jr. Melnikov wrote: > The ASM1064 SATA host controller always reports wrongly, > that it has 24 ports. But in reality, it only has four ports. > > before: > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > after: > ahci 0000:04:00.0: ASM1064 has only four ports > ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode This still says 24 ports, is that a copy & paste error in the commit msg ? Regards, Hans > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> > > diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c > index da2e74fce2d9..ec30d8330d16 100644 > --- a/drivers/ata/ahci.c > +++ b/drivers/ata/ahci.c > @@ -671,9 +671,14 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); > static void ahci_pci_save_initial_config(struct pci_dev *pdev, > struct ahci_host_priv *hpriv) > { > - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) { > - dev_info(&pdev->dev, "ASM1166 has only six ports\n"); > - hpriv->saved_port_map = 0x3f; > + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) { > + if (pdev->device == 0x1166) { > + dev_info(&pdev->dev, "ASM1166 has only six ports\n"); > + hpriv->saved_port_map = 0x3f; > + } else if (pdev->device == 0x1064) { > + dev_info(&pdev->dev, "ASM1064 has only four ports\n"); > + hpriv->saved_port_map = 0xf; > + } > } > > if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) { >
On 2/7/24 12:58 PM, Andrey Jr. Melnikov wrote: > The ASM1064 SATA host controller always reports wrongly, > that it has 24 ports. But in reality, it only has four ports. > > before: > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > after: > ahci 0000:04:00.0: ASM1064 has only four ports > ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> > > diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c > index da2e74fce2d9..ec30d8330d16 100644 > --- a/drivers/ata/ahci.c > +++ b/drivers/ata/ahci.c > @@ -671,9 +671,14 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); > static void ahci_pci_save_initial_config(struct pci_dev *pdev, > struct ahci_host_priv *hpriv) > { > - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) { > - dev_info(&pdev->dev, "ASM1166 has only six ports\n"); > - hpriv->saved_port_map = 0x3f; > + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) { > + if (pdev->device == 0x1166) { Maybe *switch* instead? > + dev_info(&pdev->dev, "ASM1166 has only six ports\n"); > + hpriv->saved_port_map = 0x3f; > + } else if (pdev->device == 0x1064) { > + dev_info(&pdev->dev, "ASM1064 has only four ports\n"); > + hpriv->saved_port_map = 0xf; > + } > } > > if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) { MBR, Sergey
> > Hi Andrey > > On 2/7/24 10:58, Andrey Jr. Melnikov wrote: > > The ASM1064 SATA host controller always reports wrongly, > > that it has 24 ports. But in reality, it only has four ports. > > > > before: > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode > > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > > after: > > ahci 0000:04:00.0: ASM1064 has only four ports > > ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode > > This still says 24 ports, is that a copy & paste error in the commit msg ? This is the raw value of the read-only Host Capability register, how should it be changed here? If silicon lies about its configuration - kerel prints what it sees from silicon.
> On 2/7/24 12:58 PM, Andrey Jr. Melnikov wrote: > > > The ASM1064 SATA host controller always reports wrongly, > > that it has 24 ports. But in reality, it only has four ports. > > > > before: > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode > > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > > after: > > ahci 0000:04:00.0: ASM1064 has only four ports > > ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode > > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > > > > Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> > > > > diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c > > index da2e74fce2d9..ec30d8330d16 100644 > > --- a/drivers/ata/ahci.c > > +++ b/drivers/ata/ahci.c > > @@ -671,9 +671,14 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); > > static void ahci_pci_save_initial_config(struct pci_dev *pdev, > > struct ahci_host_priv *hpriv) > > { > > - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) { > > - dev_info(&pdev->dev, "ASM1166 has only six ports\n"); > > - hpriv->saved_port_map = 0x3f; > > + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) { > > + if (pdev->device == 0x1166) { > > Maybe *switch* instead? Ok. Can someone explain to me - which method I should use here - override portmap via hpriv->saved_port_map or mask it via hpriv->mask_port_map ? > > + dev_info(&pdev->dev, "ASM1166 has only six ports\n"); > > + hpriv->saved_port_map = 0x3f; > > + } else if (pdev->device == 0x1064) { > > + dev_info(&pdev->dev, "ASM1064 has only four ports\n"); > > + hpriv->saved_port_map = 0xf; > > + } > > } > > > > if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
On 2/8/24 16:21, Andrey Melnikov wrote: >> >> Hi Andrey >> >> On 2/7/24 10:58, Andrey Jr. Melnikov wrote: >>> The ASM1064 SATA host controller always reports wrongly, >>> that it has 24 ports. But in reality, it only has four ports. >>> >>> before: >>> ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled >>> ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode >>> ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst >>> >>> after: >>> ahci 0000:04:00.0: ASM1064 has only four ports >>> ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf >>> ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled >>> ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode >> >> This still says 24 ports, is that a copy & paste error in the commit msg ? > > This is the raw value of the read-only Host Capability register, how > should it be changed here? If silicon lies about its configuration - > kerel prints what it sees from silicon. This should print the actual number of ports that you forced with the port map change: diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 1a63200ea437..7cb3f137bc1b 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -2637,7 +2637,7 @@ void ahci_print_info(struct ata_host *host, const char *scc_s) vers & 0xff, ((cap >> 8) & 0x1f) + 1, - (cap & 0x1f) + 1, + (cap & hpriv->saved_port_map) + 1, speed_s, impl, scc_s);
Hello Serge, Andrey, On Thu, Feb 08, 2024 at 10:27:11AM +0300, Andrey Melnikov wrote: > > On 2/7/24 12:58 PM, Andrey Jr. Melnikov wrote: > > > > > The ASM1064 SATA host controller always reports wrongly, > > > that it has 24 ports. But in reality, it only has four ports. > > > > > > before: > > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode > > > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > > > > after: > > > ahci 0000:04:00.0: ASM1064 has only four ports > > > ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf > > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode > > > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > > > > > > > Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> > > > > > > diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c > > > index da2e74fce2d9..ec30d8330d16 100644 > > > --- a/drivers/ata/ahci.c > > > +++ b/drivers/ata/ahci.c > > > @@ -671,9 +671,14 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); > > > static void ahci_pci_save_initial_config(struct pci_dev *pdev, > > > struct ahci_host_priv *hpriv) > > > { > > > - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) { > > > - dev_info(&pdev->dev, "ASM1166 has only six ports\n"); > > > - hpriv->saved_port_map = 0x3f; > > > + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) { > > > + if (pdev->device == 0x1166) { > > > > Maybe *switch* instead? > > Ok. > Can someone explain to me - which method I should use here - override > portmap via hpriv->saved_port_map or mask it via hpriv->mask_port_map > ? Serge, you seem to be the last person to touch this in commit 88589772e80c ("ata: libahci: Discard redundant force_port_map parameter"), where you removed force_port_map, so you are already familiar with this code. From my quick look, it looks like mask_port_map is used to disable one or more ports from the port_map. But do you know if there is a reason why platforms that need to do that can't just change saved_port map directly? Kind regards, Niklas
Hello. > Hello Serge, Andrey, > > On Thu, Feb 08, 2024 at 10:27:11AM +0300, Andrey Melnikov wrote: > > > On 2/7/24 12:58 PM, Andrey Jr. Melnikov wrote: > > > > > > > The ASM1064 SATA host controller always reports wrongly, > > > > that it has 24 ports. But in reality, it only has four ports. > > > > > > > > before: > > > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode > > > > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > > > > > > after: > > > > ahci 0000:04:00.0: ASM1064 has only four ports > > > > ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf > > > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode > > > > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > > > > > > > > > > Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> > > > > > > > > diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c > > > > index da2e74fce2d9..ec30d8330d16 100644 > > > > --- a/drivers/ata/ahci.c > > > > +++ b/drivers/ata/ahci.c > > > > @@ -671,9 +671,14 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); > > > > static void ahci_pci_save_initial_config(struct pci_dev *pdev, > > > > struct ahci_host_priv *hpriv) > > > > { > > > > - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) { > > > > - dev_info(&pdev->dev, "ASM1166 has only six ports\n"); > > > > - hpriv->saved_port_map = 0x3f; > > > > + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) { > > > > + if (pdev->device == 0x1166) { > > > > > > Maybe *switch* instead? > > > > Ok. > > Can someone explain to me - which method I should use here - override > > portmap via hpriv->saved_port_map or mask it via hpriv->mask_port_map > > ? > > Serge, you seem to be the last person to touch this in > commit 88589772e80c ("ata: libahci: Discard redundant force_port_map > parameter"), where you removed force_port_map, so you are already > familiar with this code. > > From my quick look, it looks like mask_port_map is used to disable one or > more ports from the port_map. > > But do you know if there is a reason why platforms that need to do that > can't just change saved_port map directly? Well, after deep dive into git history - initially, overriding port_map introduced by commits d799e083a80b220f3681d7790f11e77d1704022b (jmb361 workaround) and cd70c26617f4686355263be4533ce8030242740e (marvel 6145 support), both override port mapping, but in different ways - first set to 1, second - apply masks. Logically - port_map = 1 and port_map &= 1 - are the same. Later, in commit 394d6e535f15c6f2d3c7fe2e228ee595acf0648c this two hacks moved around, and setting port_map splitted into two ways - set it directly via force_port_map (jmb361 workaround) and apply mask via mask_port_map (marvel 6145 hack). And now, we have two knobs which do the same! After that, commit 566d1827df2ef0cbe921d3d6946ac3007b1a6938 add checking AHCI version (yet another SATA glitches workaround, user report [1] shows 8 port and bitmask 0xff - 32 ports) and this break updating saved_port_map for AHCI >= 1.3. Later, commit 2fd0f46cb1b82587c7ae4a616d69057fb9bd0af7 fix saving port_map again, and now overriding port_map completely splitted. saved_port_map is really saved (and written back to HOST_PORTS_IMPL register on saved_port map()) for all AHCI versions, mask_port_map is applied and not updated saved_port_map. 1. https://lists.openwall.net/linux-kernel/2016/01/13/171
On Thu, Feb 08, 2024 at 10:27:11AM +0300, Andrey Melnikov wrote: > > On 2/7/24 12:58 PM, Andrey Jr. Melnikov wrote: > > > > > The ASM1064 SATA host controller always reports wrongly, > > > that it has 24 ports. But in reality, it only has four ports. > > > > > > before: > > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode > > > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > > > > after: > > > ahci 0000:04:00.0: ASM1064 has only four ports > > > ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf > > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode > > > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > > > > > > > Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> > > > > > > diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c > > > index da2e74fce2d9..ec30d8330d16 100644 > > > --- a/drivers/ata/ahci.c > > > +++ b/drivers/ata/ahci.c > > > @@ -671,9 +671,14 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); > > > static void ahci_pci_save_initial_config(struct pci_dev *pdev, > > > struct ahci_host_priv *hpriv) > > > { > > > - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) { > > > - dev_info(&pdev->dev, "ASM1166 has only six ports\n"); > > > - hpriv->saved_port_map = 0x3f; > > > + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) { > > > + if (pdev->device == 0x1166) { > > > > Maybe *switch* instead? > > Ok. Hello Andrey, do you intend to send out a v2 that uses a switch instead? And perhaps take Damien's patch as patch 1/2 (with Suggested-by: Damien ... of course), so that the before/after print in your commit message shows the override value. Kind regards, Niklas
On Tue, Feb 13, 2024 at 06:19:10PM +0100, Niklas Cassel wrote: > On Thu, Feb 08, 2024 at 10:27:11AM +0300, Andrey Melnikov wrote: > > > On 2/7/24 12:58 PM, Andrey Jr. Melnikov wrote: > > > > > > > The ASM1064 SATA host controller always reports wrongly, > > > > that it has 24 ports. But in reality, it only has four ports. > > > > > > > > before: > > > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode > > > > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > > > > > > after: > > > > ahci 0000:04:00.0: ASM1064 has only four ports > > > > ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf > > > > ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled > > > > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode > > > > ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst > > > > > > > > > > > > Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> > > > > > > > > diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c > > > > index da2e74fce2d9..ec30d8330d16 100644 > > > > --- a/drivers/ata/ahci.c > > > > +++ b/drivers/ata/ahci.c > > > > @@ -671,9 +671,14 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); > > > > static void ahci_pci_save_initial_config(struct pci_dev *pdev, > > > > struct ahci_host_priv *hpriv) > > > > { > > > > - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) { > > > > - dev_info(&pdev->dev, "ASM1166 has only six ports\n"); > > > > - hpriv->saved_port_map = 0x3f; > > > > + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) { > > > > + if (pdev->device == 0x1166) { > > > > > > Maybe *switch* instead? > > > > Ok. > > Hello Andrey, > > do you intend to send out a v2 that uses a switch instead? > > And perhaps take Damien's patch as patch 1/2 > (with Suggested-by: Damien ... of course), > so that the before/after print in your commit message shows > the override value. On second thought, just go ahead and respin your patch using a switch, as I don't think Damien's patch is fully correct. He suggested to use hpriv->saved_port_map. However, that will show the wrong result for platforms using hpriv->mask_port_map. As when hpriv->mask_port_map is used, saved_port_map is not set: https://github.com/torvalds/linux/blob/v6.8-rc4/drivers/ata/libahci.c#L536-L548 However, the local variable "port_map" is updated for both saved_port_map and mask_port_map cases. And then at the end: hpriv->port_map = port_map; https://github.com/torvalds/linux/blob/v6.8-rc4/drivers/ata/libahci.c#L597 So I think we should print hpriv->port_map, and not hpriv->saved_port_map. However.. hpriv->port_map is already printed: https://github.com/torvalds/linux/blob/v6.8-rc4/drivers/ata/libahci.c#L2617 in the "0x%x impl" print. So > before: > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode > after: > ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode Actually prints the number of *implemented* ports. I have to admit that this is a bit confusing. Personally I would have preferred if we simply printed "%u ports", hpriv->port_map, and simply dropped the "0x%x impl" part of the print, but I'm a bit worried that someone parses this print from user space, but I guess we must be allowed to improve prints if they are confusing. Damien, what do you think? Kind regards, Niklas
On 2/14/24 03:05, Niklas Cassel wrote: > On Tue, Feb 13, 2024 at 06:19:10PM +0100, Niklas Cassel wrote: >> On Thu, Feb 08, 2024 at 10:27:11AM +0300, Andrey Melnikov wrote: >>>> On 2/7/24 12:58 PM, Andrey Jr. Melnikov wrote: >>>> >>>>> The ASM1064 SATA host controller always reports wrongly, >>>>> that it has 24 ports. But in reality, it only has four ports. >>>>> >>>>> before: >>>>> ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled >>>>> ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode >>>>> ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst >>>>> >>>>> after: >>>>> ahci 0000:04:00.0: ASM1064 has only four ports >>>>> ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf >>>>> ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled >>>>> ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode >>>>> ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst >>>>> >>>>> >>>>> Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> >>>>> >>>>> diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c >>>>> index da2e74fce2d9..ec30d8330d16 100644 >>>>> --- a/drivers/ata/ahci.c >>>>> +++ b/drivers/ata/ahci.c >>>>> @@ -671,9 +671,14 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); >>>>> static void ahci_pci_save_initial_config(struct pci_dev *pdev, >>>>> struct ahci_host_priv *hpriv) >>>>> { >>>>> - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) { >>>>> - dev_info(&pdev->dev, "ASM1166 has only six ports\n"); >>>>> - hpriv->saved_port_map = 0x3f; >>>>> + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) { >>>>> + if (pdev->device == 0x1166) { >>>> >>>> Maybe *switch* instead? >>> >>> Ok. >> >> Hello Andrey, >> >> do you intend to send out a v2 that uses a switch instead? >> >> And perhaps take Damien's patch as patch 1/2 >> (with Suggested-by: Damien ... of course), >> so that the before/after print in your commit message shows >> the override value. > > On second thought, just go ahead and respin your patch using a switch, > as I don't think Damien's patch is fully correct. > > He suggested to use hpriv->saved_port_map. > > However, that will show the wrong result for platforms using > hpriv->mask_port_map. > > As when hpriv->mask_port_map is used, saved_port_map is not set: > https://github.com/torvalds/linux/blob/v6.8-rc4/drivers/ata/libahci.c#L536-L548 > > However, the local variable "port_map" is updated for both > saved_port_map and mask_port_map cases. > > And then at the end: > hpriv->port_map = port_map; > https://github.com/torvalds/linux/blob/v6.8-rc4/drivers/ata/libahci.c#L597 > > So I think we should print hpriv->port_map, > and not hpriv->saved_port_map. Indeed, good catch... > However.. hpriv->port_map is already printed: > https://github.com/torvalds/linux/blob/v6.8-rc4/drivers/ata/libahci.c#L2617 > in the "0x%x impl" print. > > So >> before: >> ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode > >> after: >> ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode > > Actually prints the number of *implemented* ports. > > > I have to admit that this is a bit confusing. > > Personally I would have preferred if we simply printed > "%u ports", hpriv->port_map, > > and simply dropped the "0x%x impl" part of the print, > but I'm a bit worried that someone parses this print from user space, > but I guess we must be allowed to improve prints if they are confusing. > > Damien, what do you think? ...but port_map is a mask, not a count of ports. So this would still be wrong. I think we simply need a small helper that look something like: int ahci_nr_ports(struct ata_host *host) { struct ahci_host_priv *hpriv = host->private_data; int i, n = 0; for_each_set_bit(i, &hpriv->port_map, AHCI_MAX_PORTS) n++; return n; } and print that instead together with the mask.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index da2e74fce2d9..ec30d8330d16 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -671,9 +671,14 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); static void ahci_pci_save_initial_config(struct pci_dev *pdev, struct ahci_host_priv *hpriv) { - if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) { - dev_info(&pdev->dev, "ASM1166 has only six ports\n"); - hpriv->saved_port_map = 0x3f; + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA) { + if (pdev->device == 0x1166) { + dev_info(&pdev->dev, "ASM1166 has only six ports\n"); + hpriv->saved_port_map = 0x3f; + } else if (pdev->device == 0x1064) { + dev_info(&pdev->dev, "ASM1064 has only four ports\n"); + hpriv->saved_port_map = 0xf; + } } if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
The ASM1064 SATA host controller always reports wrongly, that it has 24 ports. But in reality, it only has four ports. before: ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst after: ahci 0000:04:00.0: ASM1064 has only four ports ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com>