Message ID | 1328704485-1505-1-git-send-email-festevam@gmail.com |
---|---|
State | Accepted |
Commit | a091be766dc9d2ed16b8307668e13ec3182655e4 |
Delegated to: | Stefano Babic |
Headers | show |
On 08/02/2012 13:34, Fabio Estevam wrote: > Use gpio_direction_input prior to gpio_get_value. > > Cc: Jason Liu <r64343@freescale.com> > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- > board/freescale/mx53loco/mx53loco.c | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > Hi Fabio, > diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c > index e6345e7..c2c26f0 100644 > --- a/board/freescale/mx53loco/mx53loco.c > +++ b/board/freescale/mx53loco/mx53loco.c > @@ -153,7 +153,9 @@ int board_mmc_getcd(struct mmc *mmc) > int ret; > > mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1); > + gpio_direction_input(75); > mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); > + gpio_direction_input(77); > The patch makes clear that the GPIO is configured as input. However, after a reset all GPIOs in the MX53 are configured as input. Do we need such changes ? Stefano
On Wed, Feb 8, 2012 at 11:08 AM, Stefano Babic <sbabic@denx.de> wrote: > The patch makes clear that the GPIO is configured as input. However, > after a reset all GPIOs in the MX53 are configured as input. Do we need > such changes ? I would prefer to explicitly set gpio_direction_input rather than depending on the reset value and I think it aligns with the GPIO API mechanism used in the kernel as well. Regards, Fabio Estevam
On 08/02/2012 14:14, Fabio Estevam wrote: > On Wed, Feb 8, 2012 at 11:08 AM, Stefano Babic <sbabic@denx.de> wrote: > >> The patch makes clear that the GPIO is configured as input. However, >> after a reset all GPIOs in the MX53 are configured as input. Do we need >> such changes ? > > I would prefer to explicitly set gpio_direction_input rather than > depending on the reset value and I think it aligns with the GPIO API > mechanism used in the kernel as well. Ok, good reasons. Acked-by: Stefano Babic <sbabic@denx.de> Best regards, Stefano Babic
2012/2/8 Fabio Estevam <festevam@gmail.com>: > Use gpio_direction_input prior to gpio_get_value. > > Cc: Jason Liu <r64343@freescale.com> > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Jason Liu <r64343@freescale.com> > --- > board/freescale/mx53loco/mx53loco.c | 2 ++ > 1 files changed, 2 insertions(+), 0 deletions(-) > > diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c > index e6345e7..c2c26f0 100644 > --- a/board/freescale/mx53loco/mx53loco.c > +++ b/board/freescale/mx53loco/mx53loco.c > @@ -153,7 +153,9 @@ int board_mmc_getcd(struct mmc *mmc) > int ret; > > mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1); > + gpio_direction_input(75); > mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); > + gpio_direction_input(77); > > if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) > ret = !gpio_get_value(77); /* GPIO3_13 */ > -- > 1.7.1 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot
On 08/02/2012 13:34, Fabio Estevam wrote: > Use gpio_direction_input prior to gpio_get_value. > > Cc: Jason Liu <r64343@freescale.com> > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- Applied to u-boot-imx, thanks. Best regards, Stefano Babic
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index e6345e7..c2c26f0 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -153,7 +153,9 @@ int board_mmc_getcd(struct mmc *mmc) int ret; mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1); + gpio_direction_input(75); mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); + gpio_direction_input(77); if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) ret = !gpio_get_value(77); /* GPIO3_13 */
Use gpio_direction_input prior to gpio_get_value. Cc: Jason Liu <r64343@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- board/freescale/mx53loco/mx53loco.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)