| Message ID | 20231213-ad7380-mainline-v2-2-cd32150d84a3@baylibre.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | iio: adc: add new ad7380 driver | expand |
| Context | Check | Description |
|---|---|---|
| robh/dt-meta-schema | success | |
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
On Wed, Dec 13, 2023 at 05:21:19AM -0600, David Lechner wrote: > This adds a binding specification for the Analog Devices Inc. AD7380 > family of ADCs. > > Signed-off-by: David Lechner <dlechner@baylibre.com> > --- > > v2 changes: > - Added maxItems to reg property > - Replaced adi,sdo-mode property with spi-rx-bus-channels > - Made spi-rx-bus-channels property optional with default value of 1 > (this made the if: check more complex) > - Changed example to use gpio for interrupt > > .../devicetree/bindings/iio/adc/adi,ad7380.yaml | 107 +++++++++++++++++++++ > MAINTAINERS | 9 ++ > 2 files changed, 116 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml > new file mode 100644 > index 000000000000..43d58c52f7dd > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml > @@ -0,0 +1,107 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/adc/adi,ad7380.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices Simultaneous Sampling Analog to Digital Converters > + > +maintainers: > + - Michael Hennerich <Michael.Hennerich@analog.com> > + - Nuno Sá <nuno.sa@analog.com> > + > +description: | > + * https://www.analog.com/en/products/ad7380.html > + * https://www.analog.com/en/products/ad7381.html > + * https://www.analog.com/en/products/ad7383.html > + * https://www.analog.com/en/products/ad7384.html > + > +$ref: /schemas/spi/spi-peripheral-props.yaml# > + > +properties: > + compatible: > + enum: > + - adi,ad7380 > + - adi,ad7381 > + - adi,ad7383 > + - adi,ad7384 > + > + reg: > + maxItems: 1 > + > + spi-max-frequency: > + maximum: 80000000 > + spi-cpol: true > + spi-cpha: true > + > + spi-rx-bus-channels: This is now being framed as a standard property, so I think it should be in spi-peripheral-props, no? Granted, you'd need a rather more generalised explanation of the property in that case. > + description: > + In 1-wire mode, the SDOA pin acts as the sole data line and the SDOB/ALERT > + pin acts as the ALERT interrupt signal. In 2-wire mode, data for input A > + is read from SDOA and data for input B is read from SDOB/ALERT (and the > + ALERT interrupt signal is not available). > + enum: [1, 2] Jonathan also mentioned specifying that this defaults to 1-wire. I didn't see a response or that implemented. Did you miss that comment from him? Cheers, Conor. > + > + vcc-supply: > + description: A 3V to 3.6V supply that powers the chip. > + > + vlogic-supply: > + description: > + A 1.65V to 3.6V supply for the logic pins. > + > + refio-supply: > + description: > + A 2.5V to 3.3V supply for the external reference voltage. When omitted, > + the internal 2.5V reference is used. > + > + interrupts: > + description: > + When the device is using 1-wire mode, this property is used to optionally > + specify the ALERT interrupt. > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - vcc-supply > + - vlogic-supply > + > +allOf: > + - if: > + required: > + - spi-rx-bus-channels > + then: > + if: > + properties: > + spi-rx-bus-channels: > + const: 2 > + then: > + properties: > + interrupts: false > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + adc@0 { > + compatible = "adi,ad7380"; > + reg = <0>; > + > + spi-cpol; > + spi-cpha; > + spi-max-frequency = <80000000>; > + > + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; > + interrupt-parent = <&gpio0>; > + > + vcc-supply = <&supply_3_3V>; > + vlogic-supply = <&supply_3_3V>; > + refio-supply = <&supply_2_5V>; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index fe1f6f97f96a..e2a998be5879 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -430,6 +430,15 @@ W: http://wiki.analog.com/AD7142 > W: https://ez.analog.com/linux-software-drivers > F: drivers/input/misc/ad714x.c > > +AD738X ADC DRIVER (AD7380/1/2/4) > +M: Michael Hennerich <michael.hennerich@analog.com> > +M: Nuno Sá <nuno.sa@analog.com> > +R: David Lechner <dlechner@baylibre.com> > +S: Supported > +W: https://wiki.analog.com/resources/tools-software/linux-drivers/iio-adc/ad738x > +W: https://ez.analog.com/linux-software-drivers > +F: Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml > + > AD7877 TOUCHSCREEN DRIVER > M: Michael Hennerich <michael.hennerich@analog.com> > S: Supported > > -- > 2.34.1 >
On Wed, Dec 13, 2023 at 04:10:40PM +0000, Conor Dooley wrote: > On Wed, Dec 13, 2023 at 05:21:19AM -0600, David Lechner wrote: > > This adds a binding specification for the Analog Devices Inc. AD7380 > > family of ADCs. > > > > Signed-off-by: David Lechner <dlechner@baylibre.com> > > --- > > > > v2 changes: > > - Added maxItems to reg property > > - Replaced adi,sdo-mode property with spi-rx-bus-channels > > - Made spi-rx-bus-channels property optional with default value of 1 > > (this made the if: check more complex) > > - Changed example to use gpio for interrupt > > > > .../devicetree/bindings/iio/adc/adi,ad7380.yaml | 107 +++++++++++++++++++++ > > MAINTAINERS | 9 ++ > > 2 files changed, 116 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml > > new file mode 100644 > > index 000000000000..43d58c52f7dd > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml > > @@ -0,0 +1,107 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/iio/adc/adi,ad7380.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Analog Devices Simultaneous Sampling Analog to Digital Converters > > + > > +maintainers: > > + - Michael Hennerich <Michael.Hennerich@analog.com> > > + - Nuno Sá <nuno.sa@analog.com> > > + > > +description: | > > + * https://www.analog.com/en/products/ad7380.html > > + * https://www.analog.com/en/products/ad7381.html > > + * https://www.analog.com/en/products/ad7383.html > > + * https://www.analog.com/en/products/ad7384.html > > + > > +$ref: /schemas/spi/spi-peripheral-props.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + - adi,ad7380 > > + - adi,ad7381 > > + - adi,ad7383 > > + - adi,ad7384 > > + > > + reg: > > + maxItems: 1 > > + > > + spi-max-frequency: > > + maximum: 80000000 > > + spi-cpol: true > > + spi-cpha: true > > + > > + spi-rx-bus-channels: > > This is now being framed as a standard property, so I think it should be > in spi-peripheral-props, no? Granted, you'd need a rather more > generalised explanation of the property in that case. > > > + description: > > + In 1-wire mode, the SDOA pin acts as the sole data line and the SDOB/ALERT > > + pin acts as the ALERT interrupt signal. In 2-wire mode, data for input A > > + is read from SDOA and data for input B is read from SDOB/ALERT (and the > > + ALERT interrupt signal is not available). > > + enum: [1, 2] > > Jonathan also mentioned specifying that this defaults to 1-wire. I > didn't see a response or that implemented. Did you miss that comment > from him? Ah, I read the patchset backwards, d'oh. I see you did in fact do both of these things. Apologies!
On Wed, Dec 13, 2023 at 05:21:19AM -0600, David Lechner wrote: > This adds a binding specification for the Analog Devices Inc. AD7380 > family of ADCs. > > Signed-off-by: David Lechner <dlechner@baylibre.com> Having read the patchset in the correct order, this patch now seems fine to me. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Cheers, Conor.
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml new file mode 100644 index 000000000000..43d58c52f7dd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7380.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices Simultaneous Sampling Analog to Digital Converters + +maintainers: + - Michael Hennerich <Michael.Hennerich@analog.com> + - Nuno Sá <nuno.sa@analog.com> + +description: | + * https://www.analog.com/en/products/ad7380.html + * https://www.analog.com/en/products/ad7381.html + * https://www.analog.com/en/products/ad7383.html + * https://www.analog.com/en/products/ad7384.html + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - adi,ad7380 + - adi,ad7381 + - adi,ad7383 + - adi,ad7384 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 80000000 + spi-cpol: true + spi-cpha: true + + spi-rx-bus-channels: + description: + In 1-wire mode, the SDOA pin acts as the sole data line and the SDOB/ALERT + pin acts as the ALERT interrupt signal. In 2-wire mode, data for input A + is read from SDOA and data for input B is read from SDOB/ALERT (and the + ALERT interrupt signal is not available). + enum: [1, 2] + + vcc-supply: + description: A 3V to 3.6V supply that powers the chip. + + vlogic-supply: + description: + A 1.65V to 3.6V supply for the logic pins. + + refio-supply: + description: + A 2.5V to 3.3V supply for the external reference voltage. When omitted, + the internal 2.5V reference is used. + + interrupts: + description: + When the device is using 1-wire mode, this property is used to optionally + specify the ALERT interrupt. + maxItems: 1 + +required: + - compatible + - reg + - vcc-supply + - vlogic-supply + +allOf: + - if: + required: + - spi-rx-bus-channels + then: + if: + properties: + spi-rx-bus-channels: + const: 2 + then: + properties: + interrupts: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7380"; + reg = <0>; + + spi-cpol; + spi-cpha; + spi-max-frequency = <80000000>; + + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio0>; + + vcc-supply = <&supply_3_3V>; + vlogic-supply = <&supply_3_3V>; + refio-supply = <&supply_2_5V>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index fe1f6f97f96a..e2a998be5879 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -430,6 +430,15 @@ W: http://wiki.analog.com/AD7142 W: https://ez.analog.com/linux-software-drivers F: drivers/input/misc/ad714x.c +AD738X ADC DRIVER (AD7380/1/2/4) +M: Michael Hennerich <michael.hennerich@analog.com> +M: Nuno Sá <nuno.sa@analog.com> +R: David Lechner <dlechner@baylibre.com> +S: Supported +W: https://wiki.analog.com/resources/tools-software/linux-drivers/iio-adc/ad738x +W: https://ez.analog.com/linux-software-drivers +F: Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml + AD7877 TOUCHSCREEN DRIVER M: Michael Hennerich <michael.hennerich@analog.com> S: Supported
This adds a binding specification for the Analog Devices Inc. AD7380 family of ADCs. Signed-off-by: David Lechner <dlechner@baylibre.com> --- v2 changes: - Added maxItems to reg property - Replaced adi,sdo-mode property with spi-rx-bus-channels - Made spi-rx-bus-channels property optional with default value of 1 (this made the if: check more complex) - Changed example to use gpio for interrupt .../devicetree/bindings/iio/adc/adi,ad7380.yaml | 107 +++++++++++++++++++++ MAINTAINERS | 9 ++ 2 files changed, 116 insertions(+)