| Message ID | 20231201131551.201503-3-prabhakar.mahadev-lad.rj@bp.renesas.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add missing port pins for RZ/Five SoC | expand |
Hi Prabhakar, Thanks for your patch! On Fri, Dec 1, 2023 at 2:16 PM Prabhakar <prabhakar.csengg@gmail.com> wrote: > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Add the missing port pins P19 to P28 for RZ/Five SoC. These additional > pins provide expanded capabilities and are exclusive to the RZ/Five SoC. > > Couple of port pins have different configuration and is not identical for s/is/are/ > the complete port so introduced struct rzg2l_variable_pin_cfg to handle introduce > such cases and introduced PIN_CFG_VARIABLE macro. The actual pin config is introduce the > then assigned rzg2l_pinctrl_get_variable_pin_cfg(). assigned in > > Add an additional check in rzg2l_gpio_get_gpioint() to only allow GPIO pins > which support interrupt facility. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > drivers/pinctrl/renesas/pinctrl-rzg2l.c | 215 +++++++++++++++++++++++- > 1 file changed, 213 insertions(+), 2 deletions(-) > > diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c > index 94d072c8a743..083cc63c2c82 100644 > --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c > +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c > @@ -57,6 +57,8 @@ > #define PIN_CFG_FILCLKSEL BIT(12) > #define PIN_CFG_IOLH_C BIT(13) > #define PIN_CFG_SOFT_PS BIT(14) > +#define PIN_CFG_VARIABLE BIT(15) > +#define PIN_CFG_NOGPIO_INT BIT(16) Note to self: this conflicts with "[PATCH 08/14] pinctrl: renesas: rzg2l: Add output enable support", so the numbers need to be adapted. https://lore.kernel.org/all/20231120070024.4079344-9-claudiu.beznea.uj@bp.renesas.com > > #define RZG2L_MPXED_COMMON_PIN_FUNCS(group) \ > (PIN_CFG_IOLH_##group | \ > @@ -82,6 +84,11 @@ > */ > #define RZG2L_GPIO_PORT_PACK(n, a, f) (((n) > 0 ? ((u64)(GENMASK_ULL(((n) - 1 + 28), 28))) : 0) | \ > ((a) << 20) | (f)) I'd rather define RZG2L_GPIO_PORT_PACK() using RZG2L_GPIO_PORT_SPARSE_PACK(): #define RZG2L_GPIO_PORT_PACK(n, a, f) \ RZG2L_GPIO_PORT_SPARSE_PACK((1U << (n)) -1, (a), (f)) > +/* > + * m indicates the bitmap of supported pins, a is the register index > + * and f is pin configuration capabilities supported. > + */ > +#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (((u64)(m) << 28) | ((a) << 20) | (f)) > #define RZG2L_GPIO_PORT_GET_PINMAP(x) (((x) & GENMASK_ULL(35, 28)) >> 28) > #define RZG2L_GPIO_PORT_GET_PINCNT(x) (hweight8(RZG2L_GPIO_PORT_GET_PINMAP((x)))) > > @@ -185,6 +192,18 @@ struct rzg2l_dedicated_configs { > u64 config; > }; > > +/** > + * struct rzg2l_variable_pin_cfg - pin data cfg > + * @cfg: port pin configuration > + * @port: port number > + * @pin: port pin > + */ > +struct rzg2l_variable_pin_cfg { > + u32 cfg; > + u8 port; > + u8 pin; As cfg only contains the lower bits (PIN_CFG_*), I think you can fit everything in a u32: u32 cfg: 20; u32 port: 5; u32 pin: 3; > +}; > + > struct rzg2l_pinctrl_data { > const char * const *port_pins; > const u64 *port_pin_configs; > @@ -193,6 +212,8 @@ struct rzg2l_pinctrl_data { > unsigned int n_port_pins; > unsigned int n_dedicated_pins; > const struct rzg2l_hwcfg *hwcfg; > + const struct rzg2l_variable_pin_cfg *variable_pin_cfg; > + unsigned int n_variable_pin_cfg; > }; > > /** > @@ -228,6 +249,158 @@ struct rzg2l_pinctrl { > > static const u16 available_ps[] = { 1800, 2500, 3300 }; > > +#ifdef CONFIG_RISCV > +static u64 rzg2l_pinctrl_get_variable_pin_cfg(struct rzg2l_pinctrl *pctrl, > + u64 pincfg, > + unsigned int port, > + u8 pin) > +{ > + unsigned int i; > + u8 pincount; > + u8 pinmap; > + u32 off; > + > + if (!pctrl->data->n_variable_pin_cfg) > + return pincfg; This cannot happen (but implies a driver table bug). > + > + for (i = 0; i < pctrl->data->n_variable_pin_cfg; i++) { > + if (pctrl->data->variable_pin_cfg[i].port == port && > + pctrl->data->variable_pin_cfg[i].pin == pin) > + break; > + } > + if (i == pctrl->data->n_variable_pin_cfg) > + return pincfg; My first thought was that this cannot happen either, but this function is called for non-existent pins on sparse ports? > + > + pinmap = RZG2L_GPIO_PORT_GET_PINMAP(pincfg); > + pincount = RZG2L_GPIO_PORT_GET_PINCNT(pincfg); > + off = RZG2L_PIN_CFG_TO_PORT_OFFSET(pincfg); > + > + if (pinmap == pincount) Huh? > + return RZG2L_GPIO_PORT_PACK(pincount, off, pctrl->data->variable_pin_cfg[i].cfg); > + > + return RZG2L_GPIO_PORT_SPARSE_PACK(pinmap, off, pctrl->data->variable_pin_cfg[i].cfg); Can't you just replace the lower bits of pincfg by pctrl->data->variable_pin_cfg[i].cfg? return (pincfg & ~PIN_CFG_...) | pctrl->data->variable_pin_cfg[i].cfg; And just move this single statement into if-condition in the for-loop above? > +} > + > +static const struct rzg2l_variable_pin_cfg r9a07g043f_variable_pin_cfg[] = { > + { > + .port = 20, > + .pin = 0, > + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | > + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | > + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, Why do all new pins have PIN_CFG_NOGPIO_INT set? P19_1, P20_0-2, P24_5, P25_1, P28_0-4 do have bits defined in an Interrupt Enable Control Register (ISEL)? > + }, > @@ -1320,6 +1493,27 @@ static const u64 r9a07g043_gpio_configs[] = { > RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS), > RZG2L_GPIO_PORT_PACK(4, 0x21, RZG2L_MPXED_PIN_FUNCS), > RZG2L_GPIO_PORT_PACK(6, 0x22, RZG2L_MPXED_PIN_FUNCS), > +#ifdef CONFIG_RISCV > + /* Below additional port pins (P19 - P28) are exclusively available on RZ/Five SoC only */ > + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x06, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | > + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | > + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P19 */ > + RZG2L_GPIO_PORT_PACK(8, 0x07, PIN_CFG_VARIABLE), /* P20 */ > + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x08, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | > + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P21 */ > + RZG2L_GPIO_PORT_PACK(4, 0x09, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | > + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P22 */ > + RZG2L_GPIO_PORT_SPARSE_PACK(0x3e, 0x0a, PIN_CFG_VARIABLE), /* P23 */ > + RZG2L_GPIO_PORT_PACK(6, 0x0b, PIN_CFG_VARIABLE), /* P24 */ > + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x0c, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_FILONOFF | > + PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | > + PIN_CFG_NOGPIO_INT), /* P25 */ > + 0x0, /* Dummy port P26 */ > + 0x0, /* Dummy port P27 */ > + RZG2L_GPIO_PORT_PACK(6, 0x0f, PIN_CFG_IOLH_A | PIN_CFG_SR | PIN_CFG_PUPD | > + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | > + PIN_CFG_NOGPIO_INT), /* P28 */ The P28 config can be simplified to "RZG2L_MPXED_PIN_FUNCS | PIN_CFG_NOGPIO_INT". > +#endif > }; > > static const u64 r9a08g045_gpio_configs[] = { > @@ -1478,12 +1672,18 @@ static const struct rzg2l_dedicated_configs rzg3s_dedicated_pins[] = { > PIN_CFG_IO_VMC_SD1)) }, > }; > > -static int rzg2l_gpio_get_gpioint(unsigned int virq, const struct rzg2l_pinctrl_data *data) > +static int rzg2l_gpio_get_gpioint(unsigned int virq, struct rzg2l_pinctrl *pctrl) > { > + const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[virq]; > + const struct rzg2l_pinctrl_data *data = pctrl->data; > + u64 *pin_data = pin_desc->drv_data; > unsigned int gpioint; > unsigned int i; > u32 port, bit; > > + if (*pin_data & PIN_CFG_NOGPIO_INT) > + return -EINVAL; > + > port = virq / 8; > bit = virq % 8; Out-of-context, you have: gpioint = bit; for (i = 0; i < port; i++) gpioint += RZG2L_GPIO_PORT_GET_PINCNT(data->port_pin_configs[i]); return gpioint; Shouldn't the for-loop skip pins with PIN_CFG_NOGPIO_INT set? Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hi Geert, Thank you for the review. On Wed, Dec 6, 2023 at 2:25 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > Hi Prabhakar, > > Thanks for your patch! > > On Fri, Dec 1, 2023 at 2:16 PM Prabhakar <prabhakar.csengg@gmail.com> wrote: > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > > > Add the missing port pins P19 to P28 for RZ/Five SoC. These additional > > pins provide expanded capabilities and are exclusive to the RZ/Five SoC. > > > > Couple of port pins have different configuration and is not identical for > > s/is/are/ > OK. > > the complete port so introduced struct rzg2l_variable_pin_cfg to handle > > introduce > OK. > > such cases and introduced PIN_CFG_VARIABLE macro. The actual pin config is > > introduce the > OK. > > then assigned rzg2l_pinctrl_get_variable_pin_cfg(). > > assigned in > OK. > > > > Add an additional check in rzg2l_gpio_get_gpioint() to only allow GPIO pins > > which support interrupt facility. > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > --- > > drivers/pinctrl/renesas/pinctrl-rzg2l.c | 215 +++++++++++++++++++++++- > > 1 file changed, 213 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c > > index 94d072c8a743..083cc63c2c82 100644 > > --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c > > +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c > > @@ -57,6 +57,8 @@ > > #define PIN_CFG_FILCLKSEL BIT(12) > > #define PIN_CFG_IOLH_C BIT(13) > > #define PIN_CFG_SOFT_PS BIT(14) > > +#define PIN_CFG_VARIABLE BIT(15) > > +#define PIN_CFG_NOGPIO_INT BIT(16) > > Note to self: this conflicts with "[PATCH 08/14] pinctrl: renesas: > rzg2l: Add output enable support", so the numbers need to be adapted. > > https://lore.kernel.org/all/20231120070024.4079344-9-claudiu.beznea.uj@bp.renesas.com > I'll rebase the changes, as the patches have now merged. > > > > #define RZG2L_MPXED_COMMON_PIN_FUNCS(group) \ > > (PIN_CFG_IOLH_##group | \ > > @@ -82,6 +84,11 @@ > > */ > > #define RZG2L_GPIO_PORT_PACK(n, a, f) (((n) > 0 ? ((u64)(GENMASK_ULL(((n) - 1 + 28), 28))) : 0) | \ > > ((a) << 20) | (f)) > > I'd rather define RZG2L_GPIO_PORT_PACK() using RZG2L_GPIO_PORT_SPARSE_PACK(): > > #define RZG2L_GPIO_PORT_PACK(n, a, f) \ > RZG2L_GPIO_PORT_SPARSE_PACK((1U << (n)) -1, (a), (f)) > OK, i'll update it. > > > +/* > > + * m indicates the bitmap of supported pins, a is the register index > > + * and f is pin configuration capabilities supported. > > + */ > > +#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (((u64)(m) << 28) | ((a) << 20) | (f)) > > #define RZG2L_GPIO_PORT_GET_PINMAP(x) (((x) & GENMASK_ULL(35, 28)) >> 28) > > #define RZG2L_GPIO_PORT_GET_PINCNT(x) (hweight8(RZG2L_GPIO_PORT_GET_PINMAP((x)))) > > > > @@ -185,6 +192,18 @@ struct rzg2l_dedicated_configs { > > u64 config; > > }; > > > > +/** > > + * struct rzg2l_variable_pin_cfg - pin data cfg > > + * @cfg: port pin configuration > > + * @port: port number > > + * @pin: port pin > > + */ > > +struct rzg2l_variable_pin_cfg { > > + u32 cfg; > > + u8 port; > > + u8 pin; > > As cfg only contains the lower bits (PIN_CFG_*), I think you can fit > everything in a u32: > > u32 cfg: 20; > u32 port: 5; > u32 pin: 3; > Agreed. > > +}; > > + > > struct rzg2l_pinctrl_data { > > const char * const *port_pins; > > const u64 *port_pin_configs; > > @@ -193,6 +212,8 @@ struct rzg2l_pinctrl_data { > > unsigned int n_port_pins; > > unsigned int n_dedicated_pins; > > const struct rzg2l_hwcfg *hwcfg; > > + const struct rzg2l_variable_pin_cfg *variable_pin_cfg; > > + unsigned int n_variable_pin_cfg; > > }; > > > > /** > > @@ -228,6 +249,158 @@ struct rzg2l_pinctrl { > > > > static const u16 available_ps[] = { 1800, 2500, 3300 }; > > > > +#ifdef CONFIG_RISCV > > +static u64 rzg2l_pinctrl_get_variable_pin_cfg(struct rzg2l_pinctrl *pctrl, > > + u64 pincfg, > > + unsigned int port, > > + u8 pin) > > +{ > > + unsigned int i; > > + u8 pincount; > > + u8 pinmap; > > + u32 off; > > + > > + if (!pctrl->data->n_variable_pin_cfg) > > + return pincfg; > > This cannot happen (but implies a driver table bug). > agreed, I will drop it. > > + > > + for (i = 0; i < pctrl->data->n_variable_pin_cfg; i++) { > > + if (pctrl->data->variable_pin_cfg[i].port == port && > > + pctrl->data->variable_pin_cfg[i].pin == pin) > > + break; > > + } > > + if (i == pctrl->data->n_variable_pin_cfg) > > + return pincfg; > > My first thought was that this cannot happen either, but this function > is called for non-existent pins on sparse ports? > I will drop that. > > + > > + pinmap = RZG2L_GPIO_PORT_GET_PINMAP(pincfg); > > + pincount = RZG2L_GPIO_PORT_GET_PINCNT(pincfg); > > + off = RZG2L_PIN_CFG_TO_PORT_OFFSET(pincfg); > > + > > + if (pinmap == pincount) > > Huh? > Oops. > > + return RZG2L_GPIO_PORT_PACK(pincount, off, pctrl->data->variable_pin_cfg[i].cfg); > > + > > + return RZG2L_GPIO_PORT_SPARSE_PACK(pinmap, off, pctrl->data->variable_pin_cfg[i].cfg); > > Can't you just replace the lower bits of pincfg by > pctrl->data->variable_pin_cfg[i].cfg? > > return (pincfg & ~PIN_CFG_...) | pctrl->data->variable_pin_cfg[i].cfg; > > And just move this single statement into if-condition in the for-loop > above? > Agreed. > > +} > > + > > +static const struct rzg2l_variable_pin_cfg r9a07g043f_variable_pin_cfg[] = { > > + { > > + .port = 20, > > + .pin = 0, > > + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | > > + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | > > + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, > > Why do all new pins have PIN_CFG_NOGPIO_INT set? > P19_1, P20_0-2, P24_5, P25_1, P28_0-4 do have bits defined in an > Interrupt Enable Control Register (ISEL)? > I have got clarification from the HW team that the ISEL bits will be dropped for P19-P28 (and also we dont corresponding GPIOINTx for P19-P28). > > + }, > > > @@ -1320,6 +1493,27 @@ static const u64 r9a07g043_gpio_configs[] = { > > RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS), > > RZG2L_GPIO_PORT_PACK(4, 0x21, RZG2L_MPXED_PIN_FUNCS), > > RZG2L_GPIO_PORT_PACK(6, 0x22, RZG2L_MPXED_PIN_FUNCS), > > +#ifdef CONFIG_RISCV > > + /* Below additional port pins (P19 - P28) are exclusively available on RZ/Five SoC only */ > > + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x06, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | > > + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | > > + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P19 */ > > + RZG2L_GPIO_PORT_PACK(8, 0x07, PIN_CFG_VARIABLE), /* P20 */ > > + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x08, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | > > + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P21 */ > > + RZG2L_GPIO_PORT_PACK(4, 0x09, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | > > + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P22 */ > > + RZG2L_GPIO_PORT_SPARSE_PACK(0x3e, 0x0a, PIN_CFG_VARIABLE), /* P23 */ > > + RZG2L_GPIO_PORT_PACK(6, 0x0b, PIN_CFG_VARIABLE), /* P24 */ > > + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x0c, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_FILONOFF | > > + PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | > > + PIN_CFG_NOGPIO_INT), /* P25 */ > > + 0x0, /* Dummy port P26 */ > > + 0x0, /* Dummy port P27 */ > > + RZG2L_GPIO_PORT_PACK(6, 0x0f, PIN_CFG_IOLH_A | PIN_CFG_SR | PIN_CFG_PUPD | > > + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | > > + PIN_CFG_NOGPIO_INT), /* P28 */ > > The P28 config can be simplified to "RZG2L_MPXED_PIN_FUNCS | > PIN_CFG_NOGPIO_INT". > Agreed. > > +#endif > > }; > > > > static const u64 r9a08g045_gpio_configs[] = { > > @@ -1478,12 +1672,18 @@ static const struct rzg2l_dedicated_configs rzg3s_dedicated_pins[] = { > > PIN_CFG_IO_VMC_SD1)) }, > > }; > > > > -static int rzg2l_gpio_get_gpioint(unsigned int virq, const struct rzg2l_pinctrl_data *data) > > +static int rzg2l_gpio_get_gpioint(unsigned int virq, struct rzg2l_pinctrl *pctrl) > > { > > + const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[virq]; > > + const struct rzg2l_pinctrl_data *data = pctrl->data; > > + u64 *pin_data = pin_desc->drv_data; > > unsigned int gpioint; > > unsigned int i; > > u32 port, bit; > > > > + if (*pin_data & PIN_CFG_NOGPIO_INT) > > + return -EINVAL; > > + > > port = virq / 8; > > bit = virq % 8; > > Out-of-context, you have: > > gpioint = bit; > for (i = 0; i < port; i++) > gpioint += > RZG2L_GPIO_PORT_GET_PINCNT(data->port_pin_configs[i]); > > return gpioint; > > Shouldn't the for-loop skip pins with PIN_CFG_NOGPIO_INT set? > As of now P19-P28 cannot be used as interrupt pins and there is no SoC where we can test this case (as this has to match GPIOINTx for a given port pin). So we can ignore it for now. > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c index 94d072c8a743..083cc63c2c82 100644 --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c @@ -57,6 +57,8 @@ #define PIN_CFG_FILCLKSEL BIT(12) #define PIN_CFG_IOLH_C BIT(13) #define PIN_CFG_SOFT_PS BIT(14) +#define PIN_CFG_VARIABLE BIT(15) +#define PIN_CFG_NOGPIO_INT BIT(16) #define RZG2L_MPXED_COMMON_PIN_FUNCS(group) \ (PIN_CFG_IOLH_##group | \ @@ -82,6 +84,11 @@ */ #define RZG2L_GPIO_PORT_PACK(n, a, f) (((n) > 0 ? ((u64)(GENMASK_ULL(((n) - 1 + 28), 28))) : 0) | \ ((a) << 20) | (f)) +/* + * m indicates the bitmap of supported pins, a is the register index + * and f is pin configuration capabilities supported. + */ +#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (((u64)(m) << 28) | ((a) << 20) | (f)) #define RZG2L_GPIO_PORT_GET_PINMAP(x) (((x) & GENMASK_ULL(35, 28)) >> 28) #define RZG2L_GPIO_PORT_GET_PINCNT(x) (hweight8(RZG2L_GPIO_PORT_GET_PINMAP((x)))) @@ -185,6 +192,18 @@ struct rzg2l_dedicated_configs { u64 config; }; +/** + * struct rzg2l_variable_pin_cfg - pin data cfg + * @cfg: port pin configuration + * @port: port number + * @pin: port pin + */ +struct rzg2l_variable_pin_cfg { + u32 cfg; + u8 port; + u8 pin; +}; + struct rzg2l_pinctrl_data { const char * const *port_pins; const u64 *port_pin_configs; @@ -193,6 +212,8 @@ struct rzg2l_pinctrl_data { unsigned int n_port_pins; unsigned int n_dedicated_pins; const struct rzg2l_hwcfg *hwcfg; + const struct rzg2l_variable_pin_cfg *variable_pin_cfg; + unsigned int n_variable_pin_cfg; }; /** @@ -228,6 +249,158 @@ struct rzg2l_pinctrl { static const u16 available_ps[] = { 1800, 2500, 3300 }; +#ifdef CONFIG_RISCV +static u64 rzg2l_pinctrl_get_variable_pin_cfg(struct rzg2l_pinctrl *pctrl, + u64 pincfg, + unsigned int port, + u8 pin) +{ + unsigned int i; + u8 pincount; + u8 pinmap; + u32 off; + + if (!pctrl->data->n_variable_pin_cfg) + return pincfg; + + for (i = 0; i < pctrl->data->n_variable_pin_cfg; i++) { + if (pctrl->data->variable_pin_cfg[i].port == port && + pctrl->data->variable_pin_cfg[i].pin == pin) + break; + } + if (i == pctrl->data->n_variable_pin_cfg) + return pincfg; + + pinmap = RZG2L_GPIO_PORT_GET_PINMAP(pincfg); + pincount = RZG2L_GPIO_PORT_GET_PINCNT(pincfg); + off = RZG2L_PIN_CFG_TO_PORT_OFFSET(pincfg); + + if (pinmap == pincount) + return RZG2L_GPIO_PORT_PACK(pincount, off, pctrl->data->variable_pin_cfg[i].cfg); + + return RZG2L_GPIO_PORT_SPARSE_PACK(pinmap, off, pctrl->data->variable_pin_cfg[i].cfg); +} + +static const struct rzg2l_variable_pin_cfg r9a07g043f_variable_pin_cfg[] = { + { + .port = 20, + .pin = 0, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 1, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 2, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 3, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 4, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 5, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 6, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 20, + .pin = 7, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT, + }, + { + .port = 23, + .pin = 1, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT + }, + { + .port = 23, + .pin = 2, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 23, + .pin = 3, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 23, + .pin = 4, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 23, + .pin = 5, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 0, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 1, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 2, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 3, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 4, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_NOGPIO_INT, + }, + { + .port = 24, + .pin = 5, + .cfg = PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_NOGPIO_INT, + }, +}; +#endif + static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl, u8 pin, u8 off, u8 func) { @@ -1320,6 +1493,27 @@ static const u64 r9a07g043_gpio_configs[] = { RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS), RZG2L_GPIO_PORT_PACK(4, 0x21, RZG2L_MPXED_PIN_FUNCS), RZG2L_GPIO_PORT_PACK(6, 0x22, RZG2L_MPXED_PIN_FUNCS), +#ifdef CONFIG_RISCV + /* Below additional port pins (P19 - P28) are exclusively available on RZ/Five SoC only */ + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x06, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P19 */ + RZG2L_GPIO_PORT_PACK(8, 0x07, PIN_CFG_VARIABLE), /* P20 */ + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x08, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P21 */ + RZG2L_GPIO_PORT_PACK(4, 0x09, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P22 */ + RZG2L_GPIO_PORT_SPARSE_PACK(0x3e, 0x0a, PIN_CFG_VARIABLE), /* P23 */ + RZG2L_GPIO_PORT_PACK(6, 0x0b, PIN_CFG_VARIABLE), /* P24 */ + RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x0c, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_FILONOFF | + PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_NOGPIO_INT), /* P25 */ + 0x0, /* Dummy port P26 */ + 0x0, /* Dummy port P27 */ + RZG2L_GPIO_PORT_PACK(6, 0x0f, PIN_CFG_IOLH_A | PIN_CFG_SR | PIN_CFG_PUPD | + PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL | + PIN_CFG_NOGPIO_INT), /* P28 */ +#endif }; static const u64 r9a08g045_gpio_configs[] = { @@ -1478,12 +1672,18 @@ static const struct rzg2l_dedicated_configs rzg3s_dedicated_pins[] = { PIN_CFG_IO_VMC_SD1)) }, }; -static int rzg2l_gpio_get_gpioint(unsigned int virq, const struct rzg2l_pinctrl_data *data) +static int rzg2l_gpio_get_gpioint(unsigned int virq, struct rzg2l_pinctrl *pctrl) { + const struct pinctrl_pin_desc *pin_desc = &pctrl->desc.pins[virq]; + const struct rzg2l_pinctrl_data *data = pctrl->data; + u64 *pin_data = pin_desc->drv_data; unsigned int gpioint; unsigned int i; u32 port, bit; + if (*pin_data & PIN_CFG_NOGPIO_INT) + return -EINVAL; + port = virq / 8; bit = virq % 8; @@ -1593,7 +1793,7 @@ static int rzg2l_gpio_child_to_parent_hwirq(struct gpio_chip *gc, unsigned long flags; int gpioint, irq; - gpioint = rzg2l_gpio_get_gpioint(child, pctrl->data); + gpioint = rzg2l_gpio_get_gpioint(child, pctrl); if (gpioint < 0) return gpioint; @@ -1778,6 +1978,13 @@ static int rzg2l_pinctrl_register(struct rzg2l_pinctrl *pctrl) if (i && !(i % RZG2L_PINS_PER_PORT)) j++; pin_data[i] = pctrl->data->port_pin_configs[j]; +#ifdef CONFIG_RISCV + if (pin_data[i] & PIN_CFG_VARIABLE) + pin_data[i] = rzg2l_pinctrl_get_variable_pin_cfg(pctrl, + pin_data[i], + j, + i % RZG2L_PINS_PER_PORT); +#endif pins[i].drv_data = &pin_data[i]; } @@ -1925,6 +2132,10 @@ static struct rzg2l_pinctrl_data r9a07g043_data = { .n_port_pins = ARRAY_SIZE(r9a07g043_gpio_configs) * RZG2L_PINS_PER_PORT, .n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins.common), .hwcfg = &rzg2l_hwcfg, +#ifdef CONFIG_RISCV + .variable_pin_cfg = r9a07g043f_variable_pin_cfg, + .n_variable_pin_cfg = ARRAY_SIZE(r9a07g043f_variable_pin_cfg), +#endif }; static struct rzg2l_pinctrl_data r9a07g044_data = {