diff mbox series

[v2,05/12] i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure()

Message ID 20231109182823.3531846-6-andriy.shevchenko@linux.intel.com
State Superseded
Headers show
Series i2c: designware: code consolidation & cleanups | expand

Commit Message

Andy Shevchenko Nov. 9, 2023, 6:19 p.m. UTC 
For the sake of consistency, rename dw_i2c_of_configure() and change
its parameter to be aligned with the i2c_dw_acpi_configure().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Comments

Andi Shyti Nov. 9, 2023, 8:41 p.m. UTC | #1 
Hi Andy,

On Thu, Nov 09, 2023 at 08:19:15PM +0200, Andy Shevchenko wrote:
> For the sake of consistency, rename dw_i2c_of_configure() and change
> its parameter to be aligned with the i2c_dw_acpi_configure().
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Reviewed-by: Andi Shyti <andi.shyti@kernel.org>

Thanks,
Andi
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index af772a2c7fb6..c55fff3df8ca 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -110,9 +110,10 @@  static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
 	return 0;
 }
 
-static void dw_i2c_of_configure(struct platform_device *pdev)
+static void i2c_dw_of_configure(struct device *device)
 {
-	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+	struct platform_device *pdev = to_platform_device(device);
+	struct dw_i2c_dev *dev = dev_get_drvdata(device);
 
 	switch (dev->flags & MODEL_MASK) {
 	case MODEL_MSCC_OCELOT:
@@ -130,7 +131,7 @@  static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 	return -ENODEV;
 }
 
-static inline void dw_i2c_of_configure(struct platform_device *pdev)
+static inline void i2c_dw_of_configure(struct device *device)
 {
 }
 #endif
@@ -279,7 +280,7 @@  static int dw_i2c_plat_probe(struct platform_device *pdev)
 	i2c_dw_adjust_bus_speed(dev);
 
 	if (pdev->dev.of_node)
-		dw_i2c_of_configure(pdev);
+		i2c_dw_of_configure(&pdev->dev);
 
 	if (has_acpi_companion(&pdev->dev))
 		i2c_dw_acpi_configure(&pdev->dev);