| Message ID | 20231004090810.28923-3-sebastien.szymanski@armadeus.com |
|---|---|
| State | Awaiting Upstream |
| Delegated to: | Stefano Babic |
| Headers | show |
| Series | Fixes i.MX93 11x11 EVK boot failures | expand |
On Wed, Oct 4, 2023 at 6:09 AM Sébastien Szymanski <sebastien.szymanski@armadeus.com> wrote: > > The i.MX93 11x11 EVK fails to boot with following error: > > Model: NXP i.MX93 11X11 EVK board > DRAM: 2 GiB > Error binding driver 'imx93-adc': -96 > Some drivers failed to bind > Error binding driver 'simple_bus': -96 > Some drivers failed to bind > Error binding driver 'simple_bus': -96 > Some drivers failed to bind > initcall sequence 00000000fffb8f28 failed at call 000000008021e0d4 (err=-96) > ### ERROR ### Please RESET the board ### > > That's because since commit e7ff54d96303 ("imx93_evk: defconfig: add adc > support") CONFIG_ADC_IMX93 is enabled but CONFIG_ADC is not. > Fix this by enabling CONFIG_ADC in imx93_11x11_evk_defconfig. > > Make sure this situation won't happen again in future i.MX93 defconfig by > making CONFIG_ADC_IMX93 depend on CONFIG_ADC. > > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
diff --git a/configs/imx93_11x11_evk_defconfig b/configs/imx93_11x11_evk_defconfig index 89130c437d6d..7a7978c280a5 100644 --- a/configs/imx93_11x11_evk_defconfig +++ b/configs/imx93_11x11_evk_defconfig @@ -81,6 +81,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_REGMAP=y CONFIG_SYSCON=y +CONFIG_ADC=y CONFIG_ADC_IMX93=y CONFIG_CPU=y CONFIG_CPU_IMX=y diff --git a/drivers/adc/Kconfig b/drivers/adc/Kconfig index 4336732dee56..a01d73846b74 100644 --- a/drivers/adc/Kconfig +++ b/drivers/adc/Kconfig @@ -66,6 +66,7 @@ config STM32_ADC config ADC_IMX93 bool "Enable NXP IMX93 ADC driver" + depends on ADC help This enables basic driver for NXP IMX93 ADC. It provides:
The i.MX93 11x11 EVK fails to boot with following error: Model: NXP i.MX93 11X11 EVK board DRAM: 2 GiB Error binding driver 'imx93-adc': -96 Some drivers failed to bind Error binding driver 'simple_bus': -96 Some drivers failed to bind Error binding driver 'simple_bus': -96 Some drivers failed to bind initcall sequence 00000000fffb8f28 failed at call 000000008021e0d4 (err=-96) ### ERROR ### Please RESET the board ### That's because since commit e7ff54d96303 ("imx93_evk: defconfig: add adc support") CONFIG_ADC_IMX93 is enabled but CONFIG_ADC is not. Fix this by enabling CONFIG_ADC in imx93_11x11_evk_defconfig. Make sure this situation won't happen again in future i.MX93 defconfig by making CONFIG_ADC_IMX93 depend on CONFIG_ADC. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> --- configs/imx93_11x11_evk_defconfig | 1 + drivers/adc/Kconfig | 1 + 2 files changed, 2 insertions(+)